BLFT Liquid Turbine Flow Meter
SPECIFICATIONS
Performance:
Repeatability: Accuracy:
Wetted Components: Housing:
Bearings and Shaft: Rotor:
Retaining Rings:
Output Signal: (where applicable)
Coil Sensor:
Amp Sensor:
Transmitter:
±0.2% Standard: ±1% of reading; Optional: ±0.5% of reading
Standard - 304 Stainless Steel Optional - 316 Stainless Steel Tungsten Carbide Standard - 2Cr13 Stainless Steel (Optional Alloy CD4Mcu) 316 Stainless Steel
Pulse signal (Sinusoidal Waveform 10-1000mV Peak to Peak :: varies with flow rate)
Pulse signal (Low Level: ≤0.8V; High Level: ≥8V)
4 to 20 mA DC current signal
Signal Transmission Distance: ≤1,000 m (Amplified Sensor) ≤100 m (Coil Sensor, with suitable cable and low noise environment)
Electrical Connections: Basic Type: Exd Junction Box:
Hausman Connector or three-core cable 2x M20×1.5 Female (NPT connections Optional)
Explosion Proof: Standard: Optional:
None Exd Head
Protection Level:
IP65 Blind pulse output models / IP67 with F-Series
display fitted or Exd Junction Box
OPERATING CONDITIONS
Ambient:
Temperature: Pressure: Relative Humidity:
-10°C to +55°C 86 to 106 KPa 5% to 90%
Power Supply: Sensor: Transmitter:
Display Type B,B12:
Display Type C, C110: C112
Fluid Temperature and Pressure:
+12V DC (Optional: +24V DC) +24V DC Integral 3.2V Lithium Battery (+24V DC available on request)
+24V DC, Loop Powered and or Battery. See Product spec sheet.
Temperature: Pressure:
-20°C to +110°C Fluid pressure should be limited according to the rating specified.
Flow Ranges and Working Pressures :
Nominal Diameter
(mm) (in.)
Standard Flow Range (SFR) (L/min)
Extended Flow Range (EFR) (m3/h)
Standard
Customized
Pressure Rating Flange Limited
Pressure Rating Flange Limited
(Bar)
(Bar)
4 6 10 15 20 25 32 40 50 65 80 100 125 150 200
0.15 0.66 - 4.16 1.66 - 10 0.25 0.4 3.33 - 20 10 - 100 0.5 0.75 13.3 - 133.3 16.6 - 166.6 1 1.25 25 - 250 1.5 33.3 - 333.3 4 – 40 m3/h 2 2.5 7 – 70 m3/h 3 4 5 6 8
10 – 100 m3/h 20 – 200 m3/h 25 – 250 m3/h 30 – 300 m3/h 80 – 800 m3/h
0.04 to 0.4 0.06 to 0.6 0.15 to 1.5 0.4 to 8 0.45 to 9 0.5 to 10 0.8 to 15 1 to 20 2 to 40 4 to 70 5 to 100 10 to 200 13 to 250 15 to 300 40 to 800
Threaded: 63 Threaded: 63 Threaded: 63 Thread: 63:: Flange: 25 Thread: 63:: Flange: 25 Thread: 63:: Flange: 25 Thread: 63:: Flange: 25 Thread: 63:: Flange: 25 Flanged: 25 Flanged: 25 Flanged: 25 Flanged: 16 Flanged: 16 Flanged: 16 Flanged: 16
120, 160, 250 120, 160, 250 120, 160, 250 40, 63, 120, 160, 250 40, 63, 120, 160, 250 40, 63, 120, 160, 250 40, 63, 120, 160, 250
40, 63, 120, 160, 250
40, 63, 120, 160, 250 40, 63, 120, 160, 250 40, 63, 120, 160, 250 40, 63, 120, 160, 250 25, 40, 63, 120, 160 25, 40, 63, 120, 160 25, 40, 63, 120, 160
MODEL AND SELECTION (cid:57)(cid:99)(cid:96)(cid:101)(cid:91)(cid:3)(cid:75)(cid:108)(cid:105)(cid:89)(cid:96)(cid:101)(cid:92)(cid:3)(cid:61)(cid:99)(cid:102)(cid:110)(cid:3)(cid:68)(cid:92)(cid:107)(cid:92)(cid:105)(cid:3)(cid:110)(cid:96)(cid:107)(cid:95)(cid:3)(cid:74)(cid:92)(cid:101)(cid:106)(cid:102)(cid:105)(cid:38)(cid:75)(cid:105)(cid:88)(cid:101)(cid:106)(cid:100)(cid:96)(cid:107)(cid:107)(cid:92)(cid:105)
Mo BL BL BL
odel: FT-NC FT-N FT-A
: Coi : Am : 2-w
il Signal O mplified Pu wire 4- 20
Output (Sel ulse :: 12 to mA Outpu
lf Powered o 24V DC ut :: 24V
d) C Power Su DC Power
upply r Supply
Tri-clamp model
N BLFT-N
-A Blind Model with 4-20mA
(cid:75)(cid:108)(cid:105)(cid:89)(cid:96)(cid:101)(cid:92)(cid:3)(cid:61)(cid:99)(cid:102)(cid:110)(cid:3)(cid:68)(cid:92)(cid:107)(cid:92)(cid:105)(cid:3)(cid:110)(cid:96)(cid:107)(cid:95)(cid:3)(cid:59)(cid:96)(cid:94)(cid:96)(cid:107)(cid:88)(cid:99)(cid:3)(cid:59)(cid:96)(cid:106)(cid:103)(cid:99)(cid:88)(cid:112) Mo BL BL BL BL
odel: FT-B FT-B12 FT-C110 FT-C112
te / Totalse te / Totalse te / Totals te / Totals nearisation ta
: Rat : Rat : Rat : Rat (*Lin
er (3 yr Ba er (5 yr Ba er +Pulse er with lin able inside co
att, Basic M att, Basic M & 4-20mA nearization ontains calib
Model) Model) AT A output) n* +Pulse ration info to
TEX, UL, ATEX & 4-20mA o enhance ac
CSA
A output) curacy and li
ATEX inearity)
BLFT-B
B
Disp
play types
B12 / C11
10 / C112
BLFT-B
B12 / C110
0 / C112
<> Dis
splays ma
y be remoote
are availab
ble option
nally with E
EEX ia ap
pproval
MODEL SELECTION (cid:75)(cid:88)(cid:89)(cid:99)(cid:92)(cid:3)(cid:41)
Model Suffix Code
/□ /□ /□ /□ /□ /□
N o m i n a l
BLFT- □ 4 6 10 15 20 25 32 40 50 65 80 100 125 150 200
D i a m e t e r
m m
)
(
Type
NC N A
B
C
C1 C2
Accuracy
10 05
Measuring Range
Body Material
S E
S L
Explosion Rating
E
Pressure Rating
Description (SFR: Standard Flow Range)
4mm; SFR: 0.66 – 4.16 L/min 6mm; SFR: 1.66 – 10 L/min 10mm; SFR: 3.33 – 20 L/min 15mm; SFR: 10 – 100 L/min 20mm; SFR: 13.3 – 133.3 L/min 25mm; SFR: 16.6 – 166.6 L/min 32mm; SFR: 25 – 250 L/min 40mm; SFR: 33.3 – 333.3 L/min 50mm; SFR:66.6 – 666.6 L/min 65mm; SFR: 7 to 70 m3/h 80mm; SFR:10 to 100 m3/h 100mm; SFR: 20 to 200 m3/h 125mm; SFR: 25 to 250 m3/h 150mm; SFR: 30 to 300 m3/h 200mm; SFR: 80 to 800 m3/h Basic Type: Coil Pick-up Signal N= Amplified Pulse 12-24V DC 4 to 20 mA current output LCD Display Rate / Total + Reset (B12, B12X options) LCD Display: 4 to 20 mA / Pulse (C110, C110X, C112, C112X options) LCD Display with RS485 LCD Display with HART ±1.0% of reading ±0.5% of reading Standard: Refer to table 1 Extended: Refer to table 1 304 Stainless Steel 316 (L) Stainless Steel Blank: Not Explosion Proof Explosion Proof: Exd N Standard: Refer to table 1 H(x) Customized: Refer to table 1
METER CONSTRUCTION
Materials of Housing Stainless St Materials of Housing Stainless Steel 304
(cid:41)(cid:79)(cid:68)(cid:81)(cid:74)(cid:72)(cid:86)(cid:29)(cid:3)(cid:38)(cid:68)(cid:85)(cid:69)(cid:82)(cid:81)(cid:3)(cid:54)(cid:87)(cid:72)(cid:72)(cid:79)(cid:3)
Flow Straightener
Hydrauulically Balannced
Project: Q-32332 - Tyco - ADNOC Train-9 Folder: Datasheets Sent