Content from the zip file C:\Users\danie\OneDrive - Elynox\justrite-project\example-documentation\Q-21699 - Saipem COMP2\Rev 1 Quote Sent\Datasheets and CoCs.zip:

File: CoC EXP-MH-14KS-1500.pdf

EU Declaration of Conformity

Document Ref: CoC_Tank/0423

Hughes Safety Showers Ltd hereby declares that the products listed are manufactured in conformity with the requirements and provisions of the European Union CE Mark Directive 93/68/EEC.

Tank fed emergency safety showers: (S) denotes stainless-steel model variant

EXP-J-14K(S)/1500 EXP-MH-14K(S)/1500 EXP-MH-14K(S)/1500-P

EXP-J-14K(S)/1200 EXP-MH-14K(S)/1200

Conformity with this directive is met through compliance with the following standards:

BS EN ISO 7010:2020+A1:2020 Graphical symbols. Safety colours and safety signs. Registered safety signs.

BS EN 15154-5:2019

Water overhead body showers for sites other than laboratories (in possible combination with eye wash units)

ANSI/ISEA Z358.1-2014

American National Standard for Emergency Eyewash and Shower Equipment

Manufacturer’s Name: Manufacturer’s Address:

Declaration of Conformity Issued:

Hughes Safety Showers Ltd Whitefield Road, Bredbury, Stockport SK6 2SS. United Kingdom April 2023

Signature:

Dariusz Wirth Quality Technician Hughes Safety Showers

File: CoC STD-68G.pdf

EU Declaration of Conformity

Document Ref: CoC_EWSC/0423

Hughes Safety Showers Ltd hereby declares that the products listed are manufactured in conformity with the requirements and provisions of the European Union CE Mark Directive 93/68/EEC.

Self-contained emergency eye washes:

OptiWash® OptiWash® with insulated jacket OptiWash® with heated jacket STD-68G

Conformity with this directive is met through compliance with the following standards:

BS EN ISO 7010:2020+A1:2020 Graphical symbols. Safety colours and safety signs. Registered safety signs.

BS EN 15154-4:2009

Non-plumbed-in eye wash

ANSI/ISEA Z358.1-2014

American National Standard for Emergency Eyewash and Shower Equipment

Manufacturer’s Name: Manufacturer’s Address:

Declaration of Conformity Issued:

Hughes Safety Showers Ltd Whitefield Road, Bredbury, Stockport SK6 2SS. United Kingdom April 2023

Signature:

Dariusz Wirth Quality Technician Hughes Safety Showers

File: Datasheet with GA - EXP-MH-14KS-1500.pdf

1500L Tank fed safety shower - immersion heated

EXP-MH-14KS/1500

Meet EN and ANSI standards whilst protecting your workforce at

risk of contamination from hazardous substances. Ideal for cold

climates, this 1500 litre gravity fed tank shower is fully operational in

temperatures down to -35C. Featuring a self-contained tank there is

no need for a mains water supply making this the best solution for

remote locations.

The integral immersion heater and thick polyurethane insulation

maintain the temperature of the water within the overhead tank

between 15-38C. At this tepid temperature the casualty is able

to remain under the shower for the recommended 15 minutes to

decontaminate thoroughly.

Specifications

MATERIALS OF CONSTRUCTION

FRAME AND LEGS

WATER TANK

Shown with optional GRP panels and eye wash

Stainless steel

1500 L (396 US gal) capacity medium density polyethylene MDPE

TANK SURROUND AND LID

GRP

INSULATION

PIPING AND VALVE

SHOWER CONTROL VALVE

EYE WASH CONTROL VALVE

EYE WASH STRAINER

BALLCOCK VALVE

OVERFLOW

SHOWER ROSE

PANIC BAR

FOOT CONTROL OPTIONS

FASTENERS AND FIXINGS

SERVICES

ELECTRICAL EQUIPMENT

ELECTRICAL SUPPLY

IMMERSION HEATER RATING

WATER INLET

OPERATING PRESSURE

MINIMUM FLOW RATES

40mm (11/2”) foil backed polyurethane

uPVC and stainless steel

uPVC 11/2“ ball valve

1/2” stainless steel full flow ball valve

1/2” stainless steel

2 x 1/2” brass

1” male uPVC

GRP, stainless steel

Red powder coated stainless steel

GRP panel (for shower) and powder coated stainless steel treadle (for eye wash)

Stainless steel

ATEX Zone 1 & 2. Gas groups IIA & IIB. Temp Class T3 (IIC available)

Non-flameproof models also available

240V, single phase, 50/60Hz (110V optional)

3kW - 230V

3/4” female BSP

0.5 to 7 BAR G / 7 to 101 PSI

Shower: 76 L per minute / 20 US gal per minute

Eye/face wash: 12 L per minute / 3 US gal per minute

AMBIENT OPERATING TEMPERATURE

MINIMUM

MAXIMUM

-35C / -31F

35C / 95F

Specifications continued overleaf

www.hughes-safety.comProduct Datasheet1500L Tank fed safety shower - immersion heated

EXP-MH-14KS/1500

Specifications cont.

OPERATION

SHOWER

EYE WASH

DIMENSIONS & WEIGHT

DIMENSIONS (WxDxH)

WEIGHT

1

DIMENSIONS IN MILLIMETRES PROJECTION

PICTOGRAM SHOWER /EYE WASH SIGNS & LIGHT BOX

INDICATOR LIGHT (OPTIONAL)

SIDE & REAR GRP PANELLING (OPTIONAL)

Push activated panic bar or optional GRP foot panel

Lift lid

1420mm (55.9in) x 1495mm (58.9in) x 3746mm (147.5in)

340kg (750lb)

2

3

4

5

6

7

8

LIFTING LUGS (REMOVABLE)

INSPECTION HATCH

PICTOGRAM SHOWER / EYEWASH SIGN

VISUAL LEVEL INDICATOR (OPTIONAL)

ISOMETRIC VIEW

GRP INSULATED TANK LID

DETAIL A SCALE 1 : 15

MEDIUM DENSITY POLYTHENE TANK

FOIL BACKED POLYURETHANE INSULATION

GRP TANK SURROUND

GRP TANK SURROUND

SHOWER TEST HANDLE

6 4 7 3

I

T H G E H E S O R R E W O H S 6 5 1 2

I

T H G E H T E L N

I

R E T A W 6 4 1 2

3/4 INCH BSP FEMALE WATER INLET

EYE/FACEWASH FOUNTAIN WITH LOW PRESSURE DIFFUSERS (OPTIONAL)

0 7 9

1-1/4 INCH EYE/FACEWASH FOUNTAIN DRAIN PIPE

GRP/STAINLESS STEEL SHOWER ROSE

SHOWER CONTROL PANIC BAR

PLAN VIEWS WITH TANK LID OMITTED

STAINLESS STEEL CHAIN

FOOT PANEL CONTROL (OPTIONAL)

1495

1250 CRS

0 2 4 1

S R C 6 6 3 1

BALLCOCK FLOAT VALVES

WATER INLET CONNECTION

OVERFLOW CONNECTION

SHOWER VALVE CONNECTION

INTERNAL/EXTERNAL EYE/WASH VALVE CONNECTION

NOTES:

IMMERSION HEATER (3000 WATTS AT 240 VOLTS, 1700 WATTS AT 110 VOLTS)

VISUAL LEVEL INDICATOR FLOAT

REV

DRAWN

REASON

1500 LITRE CAPACITY TANK IN MEDIUM DENSITY POLYTHENE. ALL TUBING IN UPVC. SUPPORT FRAME AND LEGS MANUFACTURED FROM GALVANISED MILD STEEL HOLLOW SECTION(K) OR STAINLESS STEEL HOLLOW SECTION (KS). TANK LID, TANK JACKET AND SIDE PANELLING IN WHITE GRP - COLOUR GREEN OR YELLOW AVAILABLE AS AN OPTION. ELECTRIC SUPPLY TO BE SINGLE PHASE, 50 OR 60HZ, 240 OR 110 VOLTS. AVAILABLE AS FLAMEPROOF OR NON-FLAMEPROOF - PLEASE SPECIFY PREFERENCE WHEN PLACING ORDER.

ECN #

CHECKED

APPROVED

DATE

A

GSP

1st Release

1st Rel

SW

SW

06/09/2016

4 HOLES

18 FOR

FIXING BOLTS

NAME

GSP

SW SW

DATE

19/08/2016

19/08/2016 19/08/2016

DRAWN:

CHECKED:

APPROVED:

MATERIAL:

GALVANISED MILD STEEL ALSO AVAILABLE IN STAINLESS STEEL (EXP-MH-14KS/1500)

Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 F: +44(0)161-430-7928 E: info@hughes-safety-showers.co.uk

DEBUR AND BREAK SHARP EDGES

DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE

TITLE:

TOLERANCES: LINEAR: ANGULAR:

MODEL NO: EXP-MH-14K/1500 OUTDOOR 1500 LITRE EMERGENCY TANK SHOWER

SCALE: 1:35

FINISH:

DWG NO.

1

2

3

DO NOT SCALE OFF DRAWING

CLEAN

SHEET 1 OF 1

EXP-MH-14K-1500-GA

A

B

C

D

E

REVISION

A

A3

A

B

C

D

E

F

Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK T: +44 (0)161 430 6618 E: sales@hughes-safety.comGeneral Arrangement Drawingwww.hughes-safety.com

File: Datasheet with GA - STD-68G.pdf

Portable self-contained gravity fed eye wash - 60 L / 16 US gal

STD-68G

Where a fixed eye/face wash installation is not possible, this

portable gravity fed unit can be table mounted or wall mounted.

The 60 L / 16 US gal capacity eye wash station delivers

3 L / 0.8 US gal per minute of potable water for 15 minutes,

conforming to EN15154 and ANSI Z358.1-2014 standards.

Suitable for indoor use, and with the addition of the optional

heated cabinet can also be installed outdoors.

Specifications

MATERIALS OF CONSTRUCTION

BODY & DELIVERY MANIFOLD

High density polyethylene

SPRAY HEADS

TUBING TO MANIFOLD

STANDARD FINISH

SERVICES

CAPACITY

FLOW RATES

TUBING SIZE

OPERATION

EYE/FACE WASH

DIMENSIONS & WEIGHT

DIMENSIONS (WxDxH)

WEIGHT

Engineering grade thermoplastic

High density polyethylene

Green and yellow

60 L / 16 US gal

3 L per minute / 0.8 US gal per minute

9.5mm / 0.37in

Pull down manifold

513mm (20.2in) x 540mm (21.3in) x 457mm (18in)

Empty: 8.2kg / 18lb. Full: 68kg / 151lb

www.hughes-safety.comProduct DatasheetPortable self-contained gravity fed eye wash - 60 L / 16 US gal

STD-68G

1

2

3

4

PROJECTION 1

2

3

4

5

5

6

6

7

7

8

8

PROJECTION

A

TANK FILL POINT (& DRAIN POINT)

TANK FILL POINT (& DRAIN POINT)

572

572

TANK CAP MCDCAP

TANK CAP MCDCAP

“J” WALL BRACKET DA006

“J” WALL BRACKET DA006

VELCRO Du0166

VELCRO Du0166

B

MANIFOLD HOSE CONNECTOR (WITH “2” RING) DU0163

MANIFOLD HOSE CONNECTOR (WITH “2” RING) DU0163

MANIFOLD HOSE CLAMP (2 REQUIRED) DU0163

MANIFOLD HOSE CLAMP (2 REQUIRED) DU0163

C

MANIFOLD HOSE Du162

MANIFOLD HOSE Du162

COMPLETE MANIFOLD ASSEMBLY DM100

COMPLETE MANIFOLD ASSEMBLY DM100

VELCRO DM002

VELCRO DM002

SPRAY HEAD ASSEMBLY (INCLUDES 2) 01192

SPRAY HEAD ASSEMBLY (INCLUDES 2) 01192

WATER DRAIN POINT

WATER DRAIN POINT

“J” WALL MOUNTING BRACKET DETAILS

D

E

0 1 5

0 1 5

500

DRAWN:

CHECKED:

APPROVED:

MATERIAL:

NAME

AP

SW

LS

Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 F: +44(0)161-430-7928 E: info@hughes-safety-showers.co.uk F

1

Whitefield Road, Bredbury Stockport, Cheshire, SK6 2SS T: +44(0)161-430-6618 F: +44(0)161-430-7928 E: info@hughes-safety-showers.co.uk

2

“J” WALL MOUNTING BRACKET DETAILS

2 X 7 HOLES FOR FIXING BOLTS

50

3

50

5 1

NOTES:

2 X 7 HOLES FOR FIXING BOLTS

3

0 7

0 7

52

52

REV

DRAWN

REASON

500

DATE

18/11/2016

11/01/2017

DEBUR AND BREAK SHARP EDGES

DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE

A

AP

1st Release

TITLE: STD-68G-GA

DATE

DEBUR AND BREAK SHARP EDGES

14/02/2020

NAME

TOLERANCES LINEAR: ANGULAR:

DRAWN:

CHECKED:

APPROVED:

MATERIAL:

3

AP

SW

LS

10mm > 1000mm / 5mm < 1000mm 18/11/2016 0.5 11/01/2017 SCALE:1:8 @ A3 14/02/2020

TOLERANCES LINEAR: ANGULAR:

10mm > 1000mm / 5mm < 1000mm 0.5 DO NOT SCALE OFF DRAWING

XXX

DIMENSIONS ARE IN MILLIMETRES UNLESS SPECIFIED OTHERWISE

FINISH:

SCALE:1:8 @ A3

THE EYEWASH STATION CAN BE EITHER WALL MOUNTED (USING THE METAL “J” BRACKET PROVIDED OR USED AS A TABLE TOP FREE STANDING UNIT.

NOTES:

THE WIDE-FILL OPENING ENABLES QUICK INSPECTION, CLEANING AND FILLING. IT IS ACTIVATED BY PULLING DOWN THE HIGHLY VISIBLE EYE WASH RECEPTACLE, DELIVERING WATER THROUGH TWO DIFFUSED FLOW NOZZLES.

5 1

THE EYEWASH STATION CAN BE EITHER WALL MOUNTED (USING THE METAL “J” BRACKET PROVIDED OR USED AS A TABLE TOP FREE STANDING UNIT.

THE WIDE-FILL OPENING ENABLES QUICK INSPECTION, CLEANING AND FILLING. IT IS ACTIVATED BY PULLING DOWN THE HIGHLY VISIBLE EYE WASH RECEPTACLE, DELIVERING WATER THROUGH TWO DIFFUSED FLOW NOZZLES.

VOLUME: 60 LITRES (16 US GALLONS) FLOW RATE: 1.5 LITRES PER MINUTE (0.4GPM) COLOUR: GREEN WEIGHT: 8.2KG (DRY)

SUPPLIED WITH EYEWASH STATION ADDITIVE CONCENTRATE - 8oz

VOLUME: 60 LITRES (16 US GALLONS) FLOW RATE: 1.5 LITRES PER MINUTE (0.4GPM) COLOUR: GREEN WEIGHT: 8.2KG (DRY)

SUPPLIED WITH EYEWASH STATION ADDITIVE CONCENTRATE - 8oz

APPROVED

CHECKED

ECN #

REV

DRAWN

REASON

1st Rel

SW

LS

14/02/2020

ECN #

CHECKED

APPROVED

DATE

A

AP

1st Release

TITLE: STD-68G-GA

DWG NO.

SHEET 1 OF 1

STD-68G-GA

FINISH:

DWG NO.

XXX

SHEET 1 OF 1

STD-68G-GA

1st Rel

SW

LS

14/02/2020

REVISION

A

A3

1

2

3

DO NOT SCALE OFF DRAWING

A

B

C

D

E

A

B

C

D

E

DATE

REVISION

A

A3

A

B

C

D

E

F

Hughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK T: +44 (0)161 430 6618 E: sales@hughes-safety.comGeneral Arrangement Drawingwww.hughes-safety.com

File: Waste Cart for STD-68G.pdf

Eye wash drain cart

Strong plastic construction and a 16-gallon capacity make the

emergency eye wash drain cart ideal for collection and disposal

of wastewater from the STD-68G gravity-fed eye wash station.

Its ergonomic design and molded wheels on a steel axle make it

easy to transport outdoors, to a mop sink, or to other locations

when ready to empty.

• Strong plastic construction with 16-gallon capacity • Drain hose opening at top to collect water with screw-on cap to cover drain hose opening when transporting filled cart

• Ergonomic design for easy pushing or pulling to disposal

area

• Drain cap at base of cart for wastewater disposal and can

accommodate a standard water hose

Specifications

MATERIALS OF CONSTRUCTION

MAIN TANK

DIMENSIONS & WEIGHT

Plastic

DIMENSIONS - STANDARD ORIENTATION (WxDxH)

360mm (14in) x 360mm (14in) x 810mm (32in)

WEIGHT

3.6kg (8lbs)

Waste cart shown in use with the STD-68G. Metal frame used for dispay purposes only

Product DatasheetHughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK T: +44 (0)161 430 6618 E: sales@hughes-safety.comwww.hughes-safety.com

File: Water Treatment Additive.pdf

Water Treatment Additive

Ideal for use with Hughes self-contained eye wash units such as the STD-68G or OptiWash® to prevent bacteria growth and prolong the water quality. One 236ml bottle preserves 15-76 litres

of water.

The eye wash unit should be cleaned and refilled every 120 days

when using the water preservative.

Note:

• Do not change dilution or use with other chemicals • Do not reuse after application • Do not use if seal is mising or broken • Batch number printed on bottle • Once opened, use entire contents and discard (expiration

date only applies to a sealed bottle)

Seek medical advice if you have any of the following during or after use:

• Changes in vision • Eye pain • Condition worsens or persists • Continued redness of irritation of the eye •

If swallowed

Specifications

MATERIALS

INGREDIENTS

SERVICES

USEAGE

WARNING

Chlorhexidine 1% w/v Purified Water Propylene Glycol

For use with self-contained emergency eye wash units

For external use only. In case of contact with eye in undiluted form, flush with clean water

STORAGE TEMPERATURE

Between 20C / 68F and 25C / 77F

Product DatasheetHughes Safety Showers Ltd, Whitefield Road, Bredbury, Stockport SK6 2SS UK T: +44 (0)161 430 6618 E: sales@hughes-safety.comwww.hughes-safety.com

Project: Q-21699 - Saipem COMP2 Folder: Rev 1 Quote Sent