Tel: +44 (0) 161 430 6618 Email : sales@hughes-safety.com Registered No. 0939240 VAT Registration No. 918 5005 32 Website: www.hughes-safety.com ISO 9001:2015 Certification
Your Ref:
Our Ref: Date: Validity:
NFPS Compression Project COMP2 Q-21699-1 25/10/2023 60 Days
Quoted To:
For The Attention Of:
Mr. Harjeet Singh
SAIPEM-ITALY Viale de Gasperi, 16 20097 San Donato Milanese (Milano) Milan, Milan 20097 Italy
Commercial Notes:
- Due to current factory capacity until the end of the 2023, Delivery is estimated at 14-15 weeks subject to confirmation or revision at time of order, or following drawing and document approval requested at time of order.
- Shipping terms Ex works
- Payment terms Nett 30 days.
- Hughes Safety Showers Limited Terms and Conditions of Sale apply unless otherwise agreed in writing. These can be found on our web site - www.hughes-safety.com
We thank you for your enquiry, and now have pleasure in submitting below our quotation.
Combined Safety Shower & Eyewash Unit
For CP6S & CP7S Compression Platform
Qty
4.00
Model
EXP-MH-14KS/1500(F2)
Price
GBP 7,157.35
Ext. Price
GBP 28,629.40
EXP-MH-14KS/1500. Outdoor 1500 Litre Emergency Tank Shower. Pre-Insulated And Encased In A GRP Tank Surround Which Is Fitted With A Sign Box. Immersion Heated, Complete With Dual Safety Thermostat Supported On A Stainless-Steel Frame And Legs. Suitable For Use In Zone 1 & 2 Areas, Gas Groups IIa And IIb. 240V Single Phase 50/60 Hz.
Page 1 of 8
Qty
4.00
Model
TS 316 SS FRAME
TS Frame In 316 SS (Upgrade From 304 SS).
Price
GBP 968.00
Ext. Price
GBP 3,872.00
4.00
TS VISUAL/POINTER (1500L)
GBP 51.73
GBP 206.92
Pointer Type Level Indicator To Display Water Level On A Tank Shower.
4.00
TS E/F (1500) INTERNAL
GBP 836.74
GBP 3,346.96
Emergency Eye/Facewash Unit Fitted To The Inside Of The Tank Shower Frame.
4.00
T (K RANGE)
GBP 107.09
GBP 428.36
Treadle Type Foot Control ‘K’ In Powder Coated 304 Stainless-Steel For Hands Free Operation Of The Eyebath.
4.00
TS G/P 1500-WHITE
GBP 1,082.18
GBP 4,328.72
White GRP Panelling For Tank Shower Fitted To Three Sides Of Legs.
4.00
TS SUMP/GRP GRATING- SS WITH FOOT CONTROL
GBP 1,033.08
GBP 4,132.32
GRP Drain Sump For 1200 Or 1500 Litre Tank Shower With Stainless-Steel Frame, Complete With GRP Grating And GRP Panel Foot Control. Fitted To Underside Of Tank Shower Legs With 2 Inch BSP Female Rear Drain Outlet.
4.00
2 INCH BSP 316L SS ANSI RF FLANGE
GBP 80.48
GBP 321.92
2 Inch BSP 316L Stainless Steel B16.5 150lb Raised Face Flange Fitted to Drain Sump Outlet
4.00
SS/ES (ARABIC)
GBP 31.50
GBP 126.00
Arabic Pictogram Emergency Shower And Eye Wash Sign.
4.00
TS WATER TREAT 1500
GBP 820.72
GBP 3,282.88
Water Treatment Product For 1500L Tank Shower - Hydroclenz.
4.00
TS INLET - Stainless- steel EXTENSION
Stainless-Steel Inlet Piping Extension For Tank Shower.
GBP 164.28
GBP 657.12
4.00
1/2 INCH BSP SS LOCKABLE VALVE
GBP 40.96
GBP 163.84
1/2 Inch 3 Piece 316 Stainless Steel Lockable Isolation Ball Valve.
Page 2 of 8
Qty
4.00
Model
2 INCH BSP 316L SS ANSI RF FLANGE
Price
GBP 80.48
Ext. Price
GBP 321.92
2 Inch BSP 316L Stainless Steel B16.5 150lb Raised Face Flange Fitted to Water Inlet
4.00
PROX TS (F) FOR REMOTE SIGNAL
GBP 495.72
GBP 1,982.88
Brass Nickel Plated Low Inrush Proximity Switch For Shower Remote Alarm Signal. Complete With Junction Box And Brackets. Suitable For Zone 1 & 2 Areas Gas Groups IIa And IIb. Suitable For Tank Showers.
4.00
PROX 2ND TS (F) FOR REMOTE SIGNAL
GBP 376.93
GBP 1,507.72
Brass Nickel Plated Low Inrush 2nd Proximity Switch For Eyebath Remote Alarm Signal. Complete With Brackets. Suitable For Zone 1 & 2 Areas Gas Groups IIa And IIb. Suitable For Tank Showers.
4.00
TS LS(F2)
GBP 423.67
GBP 1,694.68
Tank Shower Low Level Water Switch. Suitable For Use In Areas Designated As Zone 1 And 2. Gas Groups IIa And IIb.
4.00
BODY SPRAY
GBP 337.50
GBP 1,350.00
3/4 Inch UPVC Body-Wash Assembly For 1500L Tank Shower (Will Activate at Same Time as Overhead Shower Rose)
4.00
NAMEPLATE
GBP 238.50
GBP 954.00
316 Stainless Steel Nameplate - Engraved with 12 lines of text, as per Project Specification & Permanently Fastened to Unit by Rivets
4.00
TAGGING
GBP 44.00
GBP 176.00
316 Stainless-Steel Tag Plate - 105mm X 35mm.
8.00
BOSS (Stainless-steel)
GBP 89.50
GBP 716.00
Earthing Boss. Stainless Steel Fully Welded - M12 (Fitted in Opposite Corners of Frame)
4.00
BOLTS - M16 S/S
GBP 86.00
GBP 344.00
Fixing Bolts 316 Stainless Steel - M16 - Set Of Four.
Combined Safety Shower & Eyewash Unit TOTAL:
GBP 58,543.64
Zero Power Cooler
Supplied fitted to the roof of the Combined Safety Shower & Eyewash Unit
Qty
4.00
Model
ZERO POWER COOLER
Price
GBP 11,195.00
Ext. Price
GBP 44,780.00
Page 3 of 8
Qty
Model
Price
Ext. Price
Integrated Zero Power, Passive Cooling System For 1500L Tank Showers. Maintains Water Temperature Within ANSI Z358.1 Standard. No Moving Parts, No Maintenance, No Power Required. Zero Running Costs. Suitable For Use in Hazardous Areas. Finished with GEOCLIMA E ElectroFin® - The ElectroFin® painting has obtained the “ISO 12944 - “C5Marine - high durability (>15years)” Certification; Cu/Al exchangers. - ElectroFin® has passed the salt spray test according to ASTN B117(/ISO9227) (15,000 hours on panel). Over 3,000 hours on exchanger.
Zero Power Cooler TOTAL:
GBP 44,780.00
Portable Eyewash Unit
For CP6S & CP7S Compression Platform
Qty
8.00
Model
STD-68G
Price
GBP 358.44
Ext. Price
GBP 2,867.52
STD-68G Unheated Wall Mounted Self Contained Emergency Eyewash Station, Complete With Water Preservative, Wall Mounting Bracket And Hughes Instruction Labels.
8.00
ES (ARABIC)
GBP 94.25
GBP 754.00
Arabic - Wall Mounted Single Sided Pictogram Eyewash Sign Powder Coated Green RAL 6032, Conforms To ISO 7010.
8.00
DRAIN CART
GBP 299.00
GBP 2,392.00
Strong Plastic Construction and 16-gallon Capacity Eyewash Drain Cart for Collection & Disposal of Waste Water from Gravity-fed Eyewash Units.
8.00
TAGGING
GBP 44.00
GBP 352.00
316 Stainless-Steel Tag Plate - 105mm X 35mm.
Portable Eyewash Unit TOTAL:
GBP 6,365.52
Clarifications / Deviations
Qty
1.00
Model
CLARIFICATION
Price
GBP 0.00
Ext. Price
GBP 0.00
CLARIFICATION - As per project painting specification “non-pressurised SS316/SS316L components shall not be painted”. Safety shower frame is 316SS & therefore will be supplied unpainted.
1.00
CLARIFICATION
GBP 0.00
GBP 0.00
CLARIFICATION - Hughes Standard Warranty Terms Apply (12 Months Warranty from Date of Despatch).
1.00
CLARIFICATION
GBP 0.00
GBP 0.00
Page 4 of 8
Qty
Model
Price
Ext. Price
CLARIFICATION - Bank Guarantees (Bonds) are not included in our offer.
1.00
CLARIFICATION
GBP 0.00
GBP 0.00
CLARIFICATION - Pressure Reducing Valve has not been offered. Reason is the safety shower (& eyebath) unit comprises of an overhead water tank, which is non-pressurised & provides gravity-fed water to the shower rose & eyebath nozzles. The mains water inlet connection (to the water tank) can accept a water pressure of up-to 7 bar g. If the inlet water pressure is higher than 7 bar g please inform us.
1.00
DEVIATION
GBP 0.00
GBP 0.00
DEVIATION - It is requested that “Thermostatic Mixing Valve shall be provided to ensure water in correct temperature”. Thermostatic Mixing Valve (TMV) will not be provided. Reason: This is the wrong application for a TMV. A TMV would be used when mixing two separate supplies of hot water & cold water. In this application, there is only one common water tank (1500L capacity) which supplies water to the safety shower & eyewash unit, and the temperature of this tank is maintained by an immersion heater & a cooler. TMV is not applicable.
1.00
DEVIATION
GBP 0.00
GBP 0.00
DEVIATION - Request for “High level switch to be provided for to overflow when refilling the tank”. This high level switch is not required. Reason: The water tank is provided with a mechanical automatic overflow facility, comprising of a drain pipe (routing any overflow water into shower drain sump). It is impossible for the water tank to overflow & therefore High Level switch is not offered. Please note, a Low Level Switch has been offered.
1.00
DEVIATION
GBP 0.00
GBP 0.00
DEVIATION - For the Portable Eyewash Station it is requested that there be 2 x 32 Oz eyewash bottles. Hughes are not offering eyewash bottles - Reason: The offered is a green coloured high-density polyethylene 60 litre capacity unit (model STD-68G). This unit conforms to ANSI Z358.1 standard & is offered with a waste water collection cart.
1.00
DEVIATION
GBP 0.00
GBP 0.00
DEVIATION - Portable Eyewash Unit requested to have “lockable threaded cap and wide fill opening”. The offered eyewash unit has a wide fill opening with cap - but the cap is not lockable. Reason: Manufacturer’s Standard.
Clarifications / Deviations TOTAL:
GBP 0.00
Other Costs
Qty
1.00
Model
POSITIVE MATERIAL IDENTIFICATION - TUBULARS
Price
GBP 912.59
Ext. Price
GBP 912.59
Positive Material Identification By X-Ray Fluorescence - For 100% of the ‘Wetted’ Stainless Steel Pipework Components (at Water Inlet)
1.00
MATERIAL CERTS
GBP 275.10
GBP 275.10
Page 5 of 8
Qty
Model
Price
Ext. Price
3.1 Stainless Steel Material Test Certificates.
1.00
PROJECT DOCUMENTATION PACKAGE
GBP 5,000.00
GBP 5,000.00
Project Documentation Package As Applicable And Listed Within The Data Sheet Provided.
1.00
CERTIFIED EUROPEAN CERTIFICATE OF ORIGIN & INVOICE
Certified European Certificate Of Origin & Invoice.
GBP 144.81
GBP 144.81
4.00
PACKING
GBP 850.00
GBP 3,400.00
Packed Fully Assembled in Lined Wooden Cases Suitable for Export
1.00
Carriage
GBP 0.00
GBP 0.00
Ex-Works, Stockport (UK)
Other Costs TOTAL:
GBP 9,732.50
TOTAL: GBP 119,421.66
Optional 2 Years Spare Parts
Please note: These items are not included in quotation value - please add on if required.
Qty
1.00
Model
BALLCOCK FLOAT VALVE
Price
GBP 12.03
Ext. Price
GBP 12.03
01 03 201 1788 - 1/2 INCH BSP BRASS BALL COCK FLOAT VALVE
1.00
BALL COCK FLOAT
GBP 5.37
GBP 5.37
01 23 257 1243 - 5 INCH DIA PLASTIC BALL COCK FLOAT
1.00
BOWL & LID
GBP 184.66
GBP 184.66
02 51 075 2112 - WHITE GRP EYE/FACEWASH BOWL & LID WITH MIRROR
1.00
FLOW REGULATOR
GBP 75.80
GBP 75.80
02 51 185 2961 - 1/2 INCH BLACK NYLON FLOW REGULATOR TEE & EYE/FACEWASH ASSEMBLY
Page 6 of 8
Qty
1.00
Model
EYEBATH VALVE/STRAINER
Price
GBP 75.71
Ext. Price
GBP 75.71
02 51 075 1859 - EYEBATH VALVE/STRAINER ASSEMBLY
Optional 2 Years Spare Parts TOTAL:
GBP 353.57
TOTAL: GBP 119,421.66
Total:
GBP 119,421.66
INSTALLATION AND COMMISSIONING
We can offer installation and commissioning for the quoted products for UK Mainland by our qualified Service Engineers. Please contact service@hughes-safety.com for a quotation All installations carried out by Hughes Safety Showers engineers come with an extended warranty of 24 months from date of installation.
DOCUMENTATION The following documents, where applicable, are included in the scope of supply:
- Standard general arrangement drawing
- Standard wiring diagram (supplied in the junction box on unit)
- Installation, operation and maintenance instructions
- Certificate of conformity
GUARANTEE The units offered would be guaranteed against bad workmanship or faulty materials for a period of 12 months from despatch our works.
EX WORKS DELIVERIES The sales invoice will be issued once the goods have been made available for collection at our premises. Notification of readiness will be given. Once invoiced title of goods will transfer and the buyer will be liable for all associated costs including insurance.
STORAGE Once notified of readiness, you must arrange for collection within 14 days. Failure to comply will result in storage charges effective from day 15, at a rate of £100 per week or part week thereof. SPECIAL TOOLS No special tools required. INSPECTION Access into our factory, located at Hughes Safety Showers Ltd., Whitefield Road, Bredbury, Stockport, Cheshire, SK6 2SS, England, United Kingdom, would be given to your personnel for inspection purposes at any time during the manufacture of the units offered. IMPORTANT NOTE: We do not arrange for third party inspection. If third party inspection is required, it is to be arranged by yourselves and at your own cost. Page 7 of 8
TESTING No testing other than our in-house testing is required on the material offered in this quotation.
We trust that the quotation meets with your specification and approval however should you require any further information or assistance please contact the Hughes Sales Team sales@hughes-safety.com or myself directly using the contact details below.
Assuring you of our best attention at all times.
Yours Faithfully for Hughes Safety Showers Limited
Simon Walmsley Proposals Engineer swalmsley@hughes-safety.com
Page 8 of 8
Project: Q-21699 - Saipem COMP2 Folder: Rev 1 Quote Sent