Engineering Standard

30 June 2021

SAES-H-101V Approved Saudi Aramco Data Sheets - Paints and Coatings

Document Responsibility: Paints and Coatings Standards Committee

Previous Revision:16 October 2017 Contact: MANUELAT

Next Revision: 30 June 2026 Page 1 of 446

©Saudi Arabian Oil Company, 2021

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Contents

Summary of Changes … 4

1 Scope … 6

2 Conflicts and Deviations … 6

3 References … 6

4 General Requirements … 7

5 Approved Coatings List by APCS … 8

6 Approved Manufacturers and Products … 13

a. AkzoNobel – Approved Products … 13

b. Belzona – Approved Products … 70

c. Carboline – Approved Products … 77

d. CeraTech – Approved Products … 134

e. Ciba S. C. – Approved Materials … 135

f. Corrocoat – Approved Products … 141

g. Daikin – Approved Products … 165

h. Durapol – Approved Products … 166

i. Envirotrol – Approved Products … 170

j. Fosam – Approved Products … 171

k. Hempel – Approved Products … 174

l. Jotun – Approved Products … 253

m. Mascoat – Approved Products … 306

n. Sakaphen – Approved Products … 310

o. Sherwin Williams – Approved Products … 314

p. Sigma – Approved Products … 359

                                                            ©Saudi Arabian Oil Company, 2021

Page 2 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

q. Super Therm – Approved Products … 426

r. Tesla – Approved Products … 427

s. Thermo-Shield – Approved Products … 434

t. Tnemec – Approved Products … 435

Document History … 453

                                                     ©Saudi Arabian Oil Company, 2021

Page 3 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Summary of Changes

Paragraph Number

Previous Revision (16 October 2017)

Current Revision (30 June 2021)

Change Type (Addition, Modification, Deletion)

Technical Change(s)

1.1

1.1

Modification

Clarified Scope of document.

3

3

Addition

Added other relevant Saudi Aramco standards.

4.10

4.10

Modification

Clarified requirements on colors of coatings.

None

4.11

Addition

Provided requirement when coating shelf- life is exceeded.

5

6

5

6

Addition

Added Approved Coatings List by APCS” (New).

Modification

Changed from “List of Approved Abrasive Materials” to “Approved Manufacturers and Products (Including New Approvals)”.

5.k. APCS-3

6.k.

Deletion

Hempel’s Coal Tar Epoxy Mastic 35670 Data Sheet under APCS-3 was deleted due to coating manufacturer’s advice.

5.m

6.m

Addition

Added the Data Sheets for the approved products of Mascoat. (New)

5.n

6.n

Additions

Added Sakaphen’s Approved Products and Data Sheets (New).

                                                            ©Saudi Arabian Oil Company, 2021

Page 4 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Paragraph Number

Previous Revision (16 October 2017)

Current Revision (30 June 2021)

Change Type (Addition, Modification, Deletion)

Technical Change(s)

5.n. APCS-11A/B/C

6.0 APCS-11A/B/C

Modification

Sherwin Williams” Approved Products under APCS-11A/B/C were corrected.

5.o

6.p APCS-2E

Modification / Addition

5.o

6.o

Deletion

Sigma’s Approved Products and Data Sheets were placed from para. 5.o to para. 6.p and Approved Product and Data Sheet under APCS-2E was added.

Sherwin Williams Express cote HCR was removed from APCS-2H, due to resin production issues.

5.r

6.r

Addition

Added Tesla’s Approved Products and Data Sheets (New) (Nano Coating Technologies).

                                                     ©Saudi Arabian Oil Company, 2021

Page 5 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

1

Scope

1.1

This standard covers approved coating systems and the minimum mandatory requirements on the proper use of Approved Protective Coating Systems (APCS) in SAES-H-001, SAES-H-002, SAES-H-003, and SAES-H-004.

1.2

This standard does not apply to architectural finishes and decorative coating applications.

2

Conflicts and Deviations

Any conflicts between this document and other applicable Mandatory Saudi Aramco Engineering Requirements (MSAERs) shall be addressed to the EK&RD Coordinator.

Any deviation from the requirements herein shall follow internal company procedure SAEP-302.

3

References

All referenced specifications, standards, codes, drawings, and similar material are considered part of this engineering standards to the extent specified, applying the latest version, unless otherwise stated.

3.1 Saudi Aramco References

Saudi Aramco Engineering Procedures

SAEP-302

Waiver of a Mandatory Saudi Aramco Engineering Requirement

Saudi Aramco Engineering Standards

SAES-B-067

Safety Identification and Safety Colors

SAES-H-001

SAES-H-002

Coating Selection and Application Requirements for Industrial Plants and Equipment

Internal and External Coatings for Steel Pipelines and Piping

SAES-H-003

Protective Coatings for Industrial Concrete Structures

SAES-H-004

Protective Coating Selection and Application Requirements for Offshore Structures and Facilities

                                                            ©Saudi Arabian Oil Company, 2021

Page 6 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Saudi Aramco Materials System Specifications

09-SAMSS-060 Packaging and Labeling Requirements for Coatings

4

General Requirements

4.1 Approved coatings shall be used properly in accordance with the Data Sheets in this standard. Packaging requirements shall be in accordance with 09- SAMSS-060.

4.2 Only the specified application method/s in this standard shall be used.

4.3 Use of forced-curing on ambient-cured liquid coatings shall only be allowed as

per coating manufacturer’s approval and detailed procedure. The detailed forced-curing procedure shall be signed by coating manufacturer. Coating manufacturer shall supervise the implementation of their forced-curing procedure and shall provide in writing a coating performance warranty of minimum five (5) years with regards to the use of forced-curing on their product.

4.4

The specifications of the APCS in the SAES-H standards listed in Section 3 of this document are mandatory and shall be complied. The Data Sheets in this standard does not provide the specifications of the APCS but rather give important information on how to properly use the approved coatings to meet the requirements and specifications of the APCS.

4.5 Coating manufacturer’s product data sheets shall be used for newly approved

coatings not yet listed in this standard.

4.6 Detailed product application instructions (PAI) shall be provided by coating manufacturer when required. PAI shall not deviate or shall not be in conflict with the requirements and specifications of the APCS.

4.7 Coating manufacturers shall not issue any Product Data Sheets that are

in

conflict with the information of the Data Sheets in this standard.

4.8

This standard shall prevail over coating manufacturer’s product data sheets if there are conflicts.

4.9 Products without indicated SAP Material Number (M/N) in this standard shall refer to the corresponding SAP M/N of the APCS in the SAES-H standards.

4.10 For color coding and identification, refer to SAES-B-067. All inquiries regarding

color coding shall be directed to Loss Prevention Department.

4.11 Coatings which have exceeded the shelf life given in the approved data sheet

must not be used.

                                                     ©Saudi Arabian Oil Company, 2021

Page 7 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

5

Approved Coatings List by APCS

APCS-1A

1. Interzinc 22 + Intergard 410
2. Carbozinc 11 + Carboguard 893SG
3. Galvosil 15780 + Hempadur Mastic (45880/45881)
4. Resist 78 + Penguard Express + Penguard FC
5. Zinc Clad II Ethyl Silicated + Macropoxy 646
6. SigmaZinc 158 + SigmaCover 410
7. Tnemec Series 90-98 + Tnemec Series 66

Water-based Primer + Epoxy Topcoat

1. Resist 5WF + Penguard Express + Penguard FC
2. Silguard SC 7550 + SigmaCover 410

APCS-1B

1. Intergard 291 + Intergard 410
2. Carboguard 893SG
3. Hempadur HB Primer 17300 or 15570 + Hempadur Mastic (45880/45881)
4. Penguard Express ZP + Penguard Express + Penguard FC
5. Macropoxy 646
6. SigmaCover 410 (Alu) + SigmaCover 410
7. Tnemec Series 66

APCS-1C

1. Interzinc 52 + Intergard 410
2. Carbozinc 858 + Carboguard 893SG
3. Hempadur Zinc 17360 + Hempadur Mastic (45880/45881)
4. Barrier 77 + Penguard Express + Penguard FC
5. Zinc Clad IV Organic Zinc Rich Epoxy Primer + Macropoxy 646
6. SigmaZinc 102HS + SigmaCover 410

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma Tnemec

Jotun Sigma

AkzoNobel Carboline Hempel

Jotun Sherwin Williams Sigma Tnemec

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma

APCS-1D

1. Interzinc 22 + Intergard 410 + Interthane 990 AkzoNobel
2. Carbozinc 11 + Carboguard 893SG + Carbothane 134 Series (134HP) Carboline
3. Galvosil 15780 + Mastic (45880/45881) + Hempathane 55210
4. Resist 78 + Penguard Express + Penguard FC + Hardtop XP
5. Zinc Clad II Ethyl Silicated + Macropoxy 646
   • Hi-Solids Polyurethane
6. SigmaZinc 158 + SigmaCover 410 + SigmaDur Gloss 7528
7. Tnemec Series 90-98 + Tnemec Series 73

Sigma Tnemec

Hempel Jotun Sherwin Williams

Water-based Primer + Epoxy Intermediate Coat + Polyurethane Topcoat

1. Resist 5WF + Penguard Express + Hardtop XP Jotun
2. Silguard SC 7550 + SigmaCover CM 7456 + SigmaDur Gloss 7528 Sigma

APCS-1E

1. Intergard 291 + Intergard 410 + interthane 990
2. Carboguard 893SG + Carboguard 893SG + Carbothane 134 Series (134HP) Carboline
3. Hempadur HB Primer 17300 or 15570 + Hempadur Mastic

AkzoNobel

Hempel

(45880/45881) + Hempathane 55210

4. Penguard Express ZP + Penguard Express + Hardtop XP

Jotun

                                                            ©Saudi Arabian Oil Company, 2021

Page 8 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

5. Macropoxy 646 + Macropoxy 646 + Hi-Solids Polyurethane
6. SigmaCover 410 (Alu) + SigmaCover 410 + SigmaDur Gloss 7528
7. Tnemec Series 66 + Tnemec series 73

Sherwin Williams Sigma Tnemec

APCS-1F

1. Interzinc 52 + Intergard 410 + Interthane 990 AkzoNobel
2. Carbozinc 858 + Carboguard 893SG + Carbothane 134 Series (134HP) Carboline
3. Hempadur Zinc 17360 + Hempadur Mastic (45880/45881)

Hempel

• Hempathane 55210

4. Barrier 77 + Penguard Express + Hardtop XP
5. Zinc Clad IV Organic Zinc Rich Epoxy Primer + Macropoxy 646

Jotun Sherwin Williams

• Hi-Solids Polyurethane

6. SigmaZinc 102HS + SigmaCover 410 + SigmaDur Gloss 7528

Sigma

APCS-2A

1. Interline 399
2. Plasite 7159
3. Hempadur 85671
4. Tankguard A.R.
5. Phenicon HS
6. PhenGuard 930 + PhenGuard 935 + PheGuard 940

APCS-2B

1. Hempadur 85671
2. Tankguard 412
3. PhenGuard 930 + PhenGuard 935 + PheGuard 940

APCS-2C

1. Interline 399
2. Plasite 7159
3. Hempadur 85671
4. Tankguard A.R.
5. Phenicon HS
6. PhenGuard 930 + PhenGuard 935 + PheGuard 940

APCS-2D

1. Interline 925
2. Phenoline 187 primer + Phenoline 187 top coat
3. Hempadur 85210

Jotun

5. Phenicon HS

APCS-2E

1. Plasite 4550 Series (4550/4550s)
2. Nova-Plate UHS
3. Novaguard 7453

APCS-2G

1. Interline 955
2. Plasite 4301HT
3. Polyglass VEF
4. Vinyl Ester GF 35910
5. Sakaflake 900

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma

Hempel Jotun Sigma

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma

AkzoNobel Carboline 4. Tankguard Storage

Sherwin Williams

Carboline Sherwin Williams Sigma

AkzoNobel Carboline Corrocoat Hempel Sakaphen

                                                     ©Saudi Arabian Oil Company, 2021

Page 9 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

6. Cor-Cote VEN FF

APCS-3

1. Bitumastic 300M
2. Targuard Coal Tar Epoxy
3. Sigma C-200a Coal Tar

APCS-4

1. Interprime 409 + Intertherm 891
2. Carbocoat GP-40 + Carbocoat GP-40 Aluminum
3. Hempel’s ZP Alkyd Primer 12090 + Hempel’s Silvium 51570
4. Pilot Primer + Bengalac Silver Aluminum
5. Kem Kromik Universal Metal Primer + Industrial Aluminum Paint
6. Sigmarine 24 + Sigma Aluminum Paint SA35
7. Tnemec Series 37H + Tnemec Series 43-46

APCS-5A

1. Carbotherm 3300
2. Ceratech 901 + Clear Coat 50
3. Zeffle IR
4. Delta T Industrial Thermal Insulating Coating
5. Supertherm
6. Tank Shield + YThermo Shield Clear Coat . APCS-5B
7. Carbotherm 551
8. Ceramic Cover CC-100
9. Delta T Industrial Thermal Insulating Coating

APCS-6

1. Interprime 409 + Interlac 665
2. Carbocoat GP 40 + Carbocoat GP 62
3. Hempel’s ZP Alkyd Primer 12090 + Hempalin 52140
4. Pilot Primer + Pilot II
5. Kem Kromik Universal Metal Primer + Industrial enamel
6. Sigmarine 24 + Sigma Enamel SA21
7. Tnemec Series 37H + Tnemec 43-36 or Series 2H

APCS-9

1. Interchlor 37
2. Carboline 3630
3. Hempatex 46330

APCS-10

1. Nitoproof 120
2. Hempinol Hi-Build 10270
3. Sigma Vokote 63

APCS-11A

1. Interzinc 22 + Intertherm 50
2. Carbozinc 11 + Thermaline 4700
3. Galvosil 15780 + Hempel’s Silicone aluminum 56910 or 56940
4. Resist 78 or Resist 5WF + Solvalitt AL

Sherwin Williams

Carboline Sherwin Williams Sigma

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma Tnemec

Carboline Ceratech Coaitngs Daikinchem Mascoat Supertherm Inc Thermo-Shield Inc.

Carboline Envirotrol Inc. Mascoat

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma Tnemec

AkzoNobel Carboline Hempel

Fosam Hempel Sigma

AkzoNobel Carboline Hempel Jotun

                                                            ©Saudi Arabian Oil Company, 2021

Page 10 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

5. Zinc Clad II Ethyl Silicate Inorganic Zinc Primer

Sherwin Williams

• Heat-Flex M505

6. SigmaZinc 158 or Silguard SC 7550 + SigmaTherm 540

Sigma

APCS-11B

1. Intertherm 50
2. Thermaline 4700 Aluminum
3. Hempel’s Silicone aluminum 56910 or 56940
4. Solvalitt AL
5. Heat-Flex M505
6. SigmaTherm 540

APCS-11C

1. Intertherm 751CSA
2. Versiline CUI 56990
3. Heat-Flex Hi-Temp 1200

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma

AkzoNobel Hempel Sherwin Williams

APCS-12 (Same products approved in APCS-1B except that an aggregate is added in APCS-12.)

APCS-17A

1. Interzinc 22
2. Carbozinc 11 3, Galvosil 15780
3. Resist 78
4. Zinc Clad II Ethyl silicate Inorganic Zinc Primer
5. SigmaZinc 158

APCS-17B

1. Carbozinc 11WB
2. Resist 5 WF
3. Silguard SC7500

APCS-19C

1. Interzone 1000
2. Carboguard 703GF
3. Hempadur Multi-Strength GF35870
4. Euronavy PE35

APCS-20A

1. Carboguard 151-2 (Hand Lay-Up)
2. Araldite GY257
3. Hempel’s Epoxy Resin System 05500
4. Tankguard Storage + Chemtech GM clear
5. Dura-Plate UHS

APCS-20B

1. Carboguard 151-2 (Spray Applied)
2. Sprayfibre 35890
3. Dura-Plate UHS

APCS-22A

1. Interseal 414 + Interzone 954

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma

Carboline Jotun Sigma

AkzoNobel Carboline Hempel Sherwin Williams

Carboline Ciba Speciality Hempel Jotun Sherwin Williams

Carboline Hempel Sherwin Williams

AkzoNobel

                                                     ©Saudi Arabian Oil Company, 2021

Page 11 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

2. Carboguard 690
3. Hempadur 45070
4. Jotamastic 80 + Penguard FC
5. Euronavy ES301
6. SigmaCover 410 (Alu) + SigmaCover 410
7. Teslan 1101 ZN-CNT + Teslan 3100

APCS-22B

1. Interzone 954
2. Carboguard 690GF
3. Enronavy PE35

APCS-26

1. Interseal 738
2. Carboguard 890
3. Hempadur Mastic (45880/45881)
4. Jotamastic 80
5. Macropoxy 646
6. Sigmacover 410 (Alu) + Sigmacover 410
7. Tnemec Series 135

APCS-26T

1. Interseal 738 + Interthane 990
2. Carboguard 890 + Carbothane 134 Series (134HP)
3. Hempadur Mastic (45880/45881) + Hempathane 55210
4. Jotamastic 80 + Hardtop XP
5. Macropoxy 646 + hi-Solids Polyurethane
6. SigmaCover 410 (Alu) + Sigmacover 410
   • Sigmadur Gloss 7528
7. Tnemec Series 135 + Tenemec Series 73

APCS-27

1. Belzona 1591 (Brush Grade)
2. Durapol UHT (Brush Grade)
3. Durapol UHT (Spray Grade)

APCS-28

1. Belzona 1391T
2. Belzona 1391S
3. Corroglass 600 Series (602/632/652)
4. Polyglass VEF

.APCS-113A

1. Intrzone 485
2. Flint-Coat 227
3. Hempadur 87540
4. Sigmaline 2000

Carboline Hempel Jotun Sherwin Williams Sigma Tesla Nanocoatings

AkzoNobel Carboline Sherwin Williams

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma Tenemec

AkzoNobel Carboline Hempel Jotun Sherwin Williams Sigma

Tenemec

Belzona Duraplo Ltd. Durapol Ltd.

Belzona Belzona Corrocoat Corrocoat

AkzoNobel Bond-Coat Hempel Sigma

                                                            ©Saudi Arabian Oil Company, 2021

Page 12 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

6

Approved Manufacturers and Products

a. AkzoNobel – Approved Products

APCS-1A

Interzinc 22 Intergard 410

APCS-1B

Intergard 291

Inorganic Zinc Primer, Solvent-Based Epoxy Topcoat

Epoxy Primer

Use Epoxy Topcoat of APCS-1A as topcoat

APCS-1C

Interzinc 52

Zinc-Rich Epoxy Primer

Use Epoxy Topcoat of APCS-1A as topcoat

APCS-1D

Use APCS-1A as primer and intermediate coat

Interthane 990

Polyurethane Topcoat

APCS-1E

Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

APCS-1F

Use APCS-1C as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

APCS-2A/2C

Interline 399

APCS-2D

Interline 925

APCS-2G

Interline 955

APCS-4

Interprime 409 Intertherm 891

APCS-6

Epoxy Novolac

Primer and Topcoat

Vinyl Ester: Glass Flake Reinforced

Zinc Phosphate Alkyd Primer Aluminum Topcoat

Use Alkyd Primer of APCS-4 as primer

Interlac 665

Alkyd Topcoat

                                                     ©Saudi Arabian Oil Company, 2021

Page 13 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

AkzoNobel – Approved Products (Cont’d)

APCS-9

Interchlor 37*

Chlorinated Rubber Coating

APCS-11A

Use primer of APCS-1A

Intertherm 50

Heat Resistant Topcoat: Aluminum

APCS-11B

Use Heat Resistant Coating of APCS-11A

APCS-11C

Intertherm 751 CSA

Heat Resistant Cold Spray Aluminum

APCS-12

Use primer and topcoat of APCS-1B

APCS-17A

Use primer of APCS-1A

APCS-19C

Interzone 1000

APCS-22A

Interseal 414 Interzone 954

APCS-22B

Interzone 954

APCS-26

Interseal 738

APCS-26T

Glass Flake Epoxy

Epoxy Primer Epoxy Topcoat

One-Coat Epoxy

Epoxy Mastic

Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

APCS-113A

Interzone 485

Ultra High Build Epoxy

*Note: Refer to coating manufacturer’s product date sheet for Interchlor 37.

                                                            ©Saudi Arabian Oil Company, 2021

Page 14 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A

Type of Coating

:

Inorganic Zinc Silicate Primer, Solvent-Based

Manufacturer

: AkzoNobel Middle East

Product Name :

Interzinc 22

SAP M/N (SAMS S/N)

:

1000194146 (09-611-958)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Base: 6 months

Powder: 12 months

Mixing

2.1

No. of Components 2.1.1 Base : QHA285 2.1.2 Hardener (Curing Agent) : QHA027

                                         :

2

2.2 Mixing Ratio by volume

: 3 Parts Base : 1 Part Powder

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA803

1000198445 (09-738-220)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

: None

2.6

Pot Life

:

4hrs at 25°C; 2Hrs at 40°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 55%; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

103 µm

65 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 15 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Interzinc 22 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :     25 m2/L

3.6 Minimum Number of Coats

  :    1

3.7

Applicable Substrate

: Carbon Steel

3.8

Surface Preparation Requirements

: Abrasive Blast to Sa 2½

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service         Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

9hrs

4hrs

3hrs

Extended 3hrs

7days

7days

Extended 2½hrs

6days

6days

Extended 2hrs

4days 4days

                      40oC

1½hrs

Extended 1hr

2days

         2days

                      50°C

1hr

Extended 1hr

2days

2days

         i.  data quoted is determined at 55% relative humidity
        ii.  Prior to overcoating, verify a value of 4 via ASTM D4752 MEK rub test

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 15-21 thou

Total output pressure ≥1592psi

Air Spray (Pressure Pot)

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

63%

                                                            ©Saudi Arabian Oil Company, 2021

Page 16 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Interzinc 22 (Cont’d)

4.2

4.3

4.4

4.5

4.6

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

Approved Color/s

: Green Grey

Finish

: Matt

:

:

:

2.44Kg/L

70-80 Krebbs Units

19°C (Mixed)

Special Instructions: At relative humidities below 55%, a low humidity cure accelerator must be used

                                                     ©Saudi Arabian Oil Company, 2021

Page 17 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F

Type of Coating

: Epoxy Intermediate or Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name :

Intergard 410

SAP M/N (SAMS S/N) : 1000194960 (09-612-375)

1000194629 (09-612-364), 1000194797 (09-612-369) or

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

                                          :   2

No. of Components 2.1.1 Base : EM series depend on color 2.1.2 Hardener (Curing Agent - C.A.) : EBA744

2.2 Mixing Ratio by volume

: 4 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

2.6

Induction Time

Pot Life

Application

: None

:

4 hrs at 25°C 2 hrs at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

3.4

Typical Wet Film Thickness per Coat

Typical Dry Film Thickness per Coat

  :

  :

167 to 250µm

100 to 150µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 18 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F - Intergard 410 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

24 m2/L

3.6 Minimum Number of Coats

3.7

Drying Time at specified DFT

   :            1 as Intermediate,
          2 as Topcoat

                  Substrate                        Recoat Interval            To Handle    To Service        Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24hrs

12hrs

8hrs

5hrs

4hr

10days

   24hrs

10days

        10days

7days

   12hrs

8days

8days

5days

    8hrs

6days 6days

4days

    5hr

4days

         4days

3days 4hr

4days

4days

Before overcoating after exposure in a contaminated environment, clean the surface of Intergard 410 thoroughly by high pressure fresh water washing and allow to dry.

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 18 - 23 thou

Total output pressure ≥2,500psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 19 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F - Intergard 410 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

60%

1.3 Kg/L

97-107 Krebbs Units

30°C (Mixed)

4.5

Approved Color/s

: Red, Gray, Yellow

4.6

Finish

: Semi-Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 20 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E

Type of Coating

: Epoxy Primer

Manufacturer

: AkzoNobel Middle East

Product Name :

Intergard 291

SAP M/N (SAMS S/N)

:

1000194626 (09-612-362)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : EPA530 2.1.2 Hardener (Curing Agent – C.A.) : EPA501

                                         :

2

2.2 Mixing Ratio by volume

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

:

4 Parts Base : 1 Part C.A.

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

2.6

Induction Time

Pot Life

Application

: None

:

6 hrs at 25°C 2 hrs at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

142 µm

75 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 21 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E - Intergard 291 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 21 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

: Carbon Steel, Stainless Steel, Galvanized Steel

: CS: Abrasive Blast Sa2½ SS: Sweep blast to 50µm

profile

 GS:  Sweep blast to 50µm

profile

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service         Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24hrs

16hrs

12hrs

8hrs

6hr

12 months 24hrs

7days

7days

12 months 16hrs

6days

6days

12 months 12hrs

5days 6days

12 months 8hr

4days

         4days

12 months 6hr

3days

3days

Before overcoating after exposure in a contaminated environment, clean the surface of Intergard 291 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 15 - 21 thou

Total output pressure ≥2200 psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

53%

                                                            ©Saudi Arabian Oil Company, 2021

Page 22 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E - Intergard 291 (Cont’d)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

1.32 Kg/L

56-66 Krebbs Units

23°C (Mixed)

Approved Color/s

: Red

Finish

: Matt

4.2

4.3

4.4

4.5

4.6

Special Instructions: This product will not cure adequately below 5°C. Intergard 291 is suitable for use as a primer for intumescent Fire Proofing Protective System.

                                                     ©Saudi Arabian Oil Company, 2021

Page 23 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F

Type of Coating

: Zinc-Rich Epoxy Primer (Organic Zinc Primer)

Manufacturer

: AkzoNobel Middle East

Product Name :

Interzinc 52

SAP M/N (SAMS S/N)

:

1000195348 (09-612-580) or 1000195361 (09-612-590)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

12 months

Mixing

2.1

No. of Components 2.1.1 Base : EPA142 2.1.2 Hardener (Curing Agent – C.A.) : EPA177

                                         :    2

2.2 Mixing Ratio by volume

: 4 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

2.6

Induction Time

Pot Life

Application

: None

:

5 hrs at 25°C 2 hrs at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min: N/A; Max: 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

110 µm

65 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 24 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F - Interzinc 52 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats

Applicable Substrate

:

:

23.6 m2/L

1

: Carbon Steel

Surface Preparation Requirements

: Abrasive Blast to Sa 2½

Drying Time at specified DFT

3.7

3.8

3.9

                  Substrate                        Recoat Interval            To Handle    To Service         Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

8hrs

5hrs

4hrs

2hrs

2hr

Extended 8hrs

7days

Extended 5hrs

6days

7days

6days

Extended 4hrs

4days 4days

Extended 2hr

2days

         2days

Extended 2hr

2days

2days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 17 - 21 thou

Total output pressure ≥2,503 psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

59%

2.52 Kg/L

80-90 Krebbs Units

29°C (Mixed)

Approved Color/s

: Grey

Finish

: Matt

                                                     ©Saudi Arabian Oil Company, 2021

Page 25 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E /1F/26T

Type of Coating

: Polyurethane Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name :

Interthane 990

SAP M/N (SAMS S/N)

:

1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : PH Series depend on Color 2.1.2 Hardener (Curing Agent – C.A.) :

                                         :

PHA046

2

2.2 Mixing Ratio by volume

: 6 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA713

1000198479 (09-738-345)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

2.6

Induction Time

Pot Life

Application

: None

:

2 hrs. at 25°C 45 mins at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

: Min = 20%; Max = 80%

3.3

Typical Wet Film Thickness Per Coat

:

88 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 26 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T - Interthane 990 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats

3.7

Drying Time at specified DFT

:

:

:

50 µm

23 m2/L

1

                  Substrate                        Recoat Interval            To Handle    To Service         Full Cure
               Temperature

Minimum Maximum

                      10°C

10hrs

Extended 10hrs

7days

                      20oC

                      30°C

                      40oC

                      50°C

6hrs

5hrs

4hrs

3hr

Extended 6hrs

5days

Extended 5hrs

4days 4days

Extended 4hr

3days

         3days

Extended 3hr

2days

2days

7days

5days

Before overcoating after exposure in a contaminated environment, clean the surface of Interthane 990 thoroughly by high pressure fresh water washing and allow to dry.

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 13 - 18 thou

Total output pressure ≥ 2,200 psi

Air Spray (Pressure Pot)

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

57%

1.21 to 1.3 Kg/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 27 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T - Interthane 990 (Cont’d)

4.3

4.4

4.5

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

70 - 80 Krebbs Units

35°C (Mixed)

Approved Color/s

: Yellow (RAL 1023), White (RAL 9010), Grey (RAL 7038), Red (RAL 3000), Green (IPL549)

4.6

Finish

: High Gloss

Special Instructions:

Like the other polyurethanes, the applicator should wear an air fed hood when spraying. Use either APCS-1A, 1B or 1C (see data sheets) as primer and intermediate coat. For APCS-26T, use APCS-26 as primer. Dry film thickness (DFT) must be in accordance with APCS-1D, 1E, 1F, 26T of SAES-H-001.

                                                            ©Saudi Arabian Oil Company, 2021

Page 28 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C

Type of Coating

: Epoxy Novolac

Manufacturer

: AkzoNobel Middle East

Product Name

SAP M/N (SAMS S/N)

:

:

Interline 399

1000683474 (09-000-496) or 1000658840 (09-000-472)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

12 months

Mixing

2.1

No. of Components 2.1.1 Base : TLA390, TLA391, TLA393 2.1.2 Hardener (Curing Agent) :

                                         :

TLA399

2

2.2 Mixing Ratio by volume

: 5 Parts Base: 1 Part Cure

Agent

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

:

2 hrs at 25°C 1 hrs at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 20%; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

135 µm

90 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 29 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Interline 399 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 27 m2/L

3.6 Minimum Number of Coats

: 2

3.7

3.8

Applicable Substrate

: Carbon Steel (CS)

Surface Preparation Requirements

: CS: Abrasive Blast Sa 2½

(SSPC SP10)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service        Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

36 hrs

20 hrs

18 hrs

16 hrs

12 hrs

5 days

   36 hrs

12 days 12 days

4 days

   20 hrs

6 days 6 days

3 days

    18 hrs

5 days 5 days

2 days

    16 hrs

4 days

       4 days

1 day

    12 hrs

3 days

       3 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 17 - 21 thou

Total output pressure ≥2,500 psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

67%

1.85 Kg/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 30 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Interline 399 (Cont’d)

4.3

4.4

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

80 - 90 Krebbs Units

24°C (Mixed)

4.5

Approved Color/s

: Grey, White, Red

4.6

Finish

: Matt

Special Instructions: This product will not cure adequately below 5°C.

                                                     ©Saudi Arabian Oil Company, 2021

Page 31 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D

Type of Coating

: Epoxy Primer

Manufacturer

: AkzoNobel Middle East

Product Name :

Interline 925

SAP M/N (SAMS S/N)

:

1000194354 (09-612-316) and 1000194357 (09-612-317)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

18 months

Mixing

2.1

No. of Components 2.1.1 Base : THA125 2.1.2 Hardener (Curing Agent) : THA126/127

                                          :   2

2.2 Mixing Ratio by volume

: 3 Parts Base: 1 Part Cure Agent

2.3

Thinner

: DO NOT THIN

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

2.6

Induction Time

Pot Life

Application

: None

:

1 hrs at 25°C 30 mins at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 20%; Max = 80%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

300 µm

300 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 32 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Interline 925 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 40 m2/L

3.6 Minimum Number of Coats

: 1

3.7

3.8

Applicable Substrate

: Carbon Steel (CS)

Surface Preparation Requirements

: CS: Abrasive Blast Sa 2½

(SSPC SP10)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

36 hrs

20 hrs

12 hrs

7 hrs

5 hrs

2 days

   36 hrs

12 days 12 days

2 days

   24 hrs

6 days 6 days

1 days

    20 hrs

5 days 5 days

12 hrs

    16 hrs

4 days

   4 days

8 hrs

    12 hrs

3 days

   3 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 21 - 26 thou

Total output pressure ≥3,000 psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

100%

                                                     ©Saudi Arabian Oil Company, 2021

Page 33 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Interline 925 (Cont’d)

4.2

4.3

4.4

4.5

4.6

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

Approved Color/s

: Yellow, White

Finish

: Gloss

:

:

:

1.52 Kg/L

125 - 150 Krebbs Units

101°C (Mixed)

Special Instructions: This product will not cure adequately below 10°C

                                                            ©Saudi Arabian Oil Company, 2021

Page 34 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G

Type of Coating

: Glass Flake Vinyl Ester

Manufacturer

: AkzoNobel Middle East

Product Name :

Interline 955

SAP M/N (SAMS S/N)

:

1000709300 (09-000502) and 1000709303 (09-000-505)

Storage

1.1

Shelf life, sheltered storage @ 20°C maximum

:

6 months

Mixing

2.1

No. of Components 2.1.1 Base : TEA600 2.1.2 Hardener (Curing Agent – C.A.) : TEA150

                                         :

2

2.2 Mixing Ratio by volume

: 98 Parts Base: 2 Parts C.A.

2.3

Thinner

: DO NOT THIN

(Retarder TEA075)

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: None

2.6

Pot Life

Application

:

40 mins at 25°C 40 mins at 40°C (with retarder)

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 20%; Max = 80%

3.3

Typical Wet Film Thickness Per Coat

  :

706 to 1,176 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 35 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Interline 955 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat : 600 – 1,000 µm

Theoretical Coverage @ 25 Micrometers : 34 m2/L Dry Film Thickness

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: Carbon Steel (CS)

3.8

Surface Preparation Requirements

: CS: Abrasive Blast Sa2½

(SSPC SP10)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

6 hrs

5 hrs

5 hrs

5 hrs

5 hrs

3 days

    8 hrs

10 days 10 days

1 day

    6 hrs

6 days 6 days

1 day

    6 hrs

5 days 5 days

12 hrs

    6 hrs

4 days

  4 days

8 hrs

    4 hrs

3 days

  3 days

Note: Material temperatures must be kept at or below 35°C during storage and

application.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 25 - 35 thou

Total output pressure ≥3,000 psi

Conventional Spray

: Not recommended

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 36 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Interline 955 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

85%

1.2 Kg/L

Viscosity

(ASTM D562)

: N/A

Flash Point

(ASTM D93 or D56)

:

32°C (Mixed)

4.5

Approved Color/s

: Yellow, White

4.6

Finish

: Semi-Gloss

Special Instructions: Refrigerated storage (ideally <20°C) of materials during transport and

storage is critical.

                                                     ©Saudi Arabian Oil Company, 2021

Page 37 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6

Type of Coating

: Alkyd Primer

Manufacturer

: AkzoNobel Middle East

Product Name

SAP M/N (SAMS S/N)

:

:

Interprime 409

1000197976 (09-708-113)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : CPA449/CPA409 2.1.2 Hardener (Curing Agent) : N/A

                                          :   1

2.2 Mixing Ratio by volume

: N/A

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA004

1000198472 (09-738-340)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

94 µm

50 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 38 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Interprime 409 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 21 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: Carbon Steel (CS)

3.8

Surface Preparation Requirements

: CS = Abrasive Blast Sa2½, St3

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24 hrs

16 hrs

12 hrs

8 hrs

6 hrs

Extended 24 hrs

7 days

   7 days

Extended 16 hrs

6 days 6 days

Extended 12 hrs

5 days 6 days

Extended 8 hrs

4 days

   4 days

Extended 6 hrs

3 days

   3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Interprime 409 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip Range 15 - 19 thou

Total output pressure ≥2,500 psi

: Aircap 704 or 765. Fluid Tip E Atomizing Pressure 40 - 60psi

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 39 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Interprime 409 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

53%

1.36 Kg/L

55-65 Krebbs Units

32°C (Mixed)

4.5

Approved Color/s

: Red, Grey

4.6

Finish

: Matt

Special Instructions: This product will not cure adequately below 5°C.

                                                            ©Saudi Arabian Oil Company, 2021

Page 40 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4

Type of Coating

: Aluminum Alkyd Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name

SAP M/N (SAMS S/N)

:

:

Intertherm 891

1000196402 (09-686-354)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : HTA002 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio by volume

: N/A

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA004

1000198472 (09-738-340)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

52 µm

25 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 41 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 - Intertherm 891 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

19 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24 hrs

24 hrs

20 hrs

16 hrs

12 hrs

Extended 48 hrs

7 days

  7 days

Extended 36 hrs

6 days 6 days

Extended 24 hrs

5 days 6 days

Extended 16 hrs

4 days

   4 days

Extended 12 hrs

3 days

   3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Intertherm 891 thoroughly by high pressure fresh water washing and allow to dry.

3.8

Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip Range 13 - 16 thou

Total output pressure ≥1,600 psi

: Aircap 704 or 765. Fluid Tip E Atomizing Pressure 40 - 60psi

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 42 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 - Intertherm 891 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

48%

1.00 Kg/L

Viscosity

(ASTM D562)

: 60-64 Krebbs Units

Flash Point

(ASTM D93 or D56)

:

43°C (Mixed)

4.5

Approved Color/s

: Aluminum

4.6

Finish

: Matt

Special Instructions: This product will not cure adequately below 5°C.

                                                     ©Saudi Arabian Oil Company, 2021

Page 43 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6

Type of Coating

: Alkyd Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name :

Interlac 665

SAP M/N (SAMS S/N) :

1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495 (09-630-763), 1000195532 (09-630-768), 1000195571 (09-630-769), 1000195577 (09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-773), 1000195650 (09-630-785), 1000195683 (09-630-794), 1000195685 (09-630-796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-631-322), 1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749 (09-631-462), 1000195801 (09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : CL Coded Series 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio by volume

: N/A

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA004

1000198474 (09-738-340)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

: None

: N/A

                                                            ©Saudi Arabian Oil Company, 2021

Page 44 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 - Interlac 665 (Cont’d)

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 20%; Max = 80%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

104 µm

50 µm

19 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24 hrs

12 hrs

10 hrs

8 hrs

6 hrs

Extended 48 hrs

7 days

  7 days

Extended 12 hrs

5 days 5 days

Extended 10 hrs

4 days 4 days

Extended 8 hrs

3 days

   3 days

Extended 6 hrs

2 days

   2 days

Before overcoating after exposure in a contaminated environment, clean the surface of Interlac 665 thoroughly by high pressure fresh water washing and allow to dry.

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 13 - 19 thou

                                   Total output pressure ≥2,000 psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E Atomizing pressure 40 to 60 psi

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 45 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 - Interlac 665 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

48%

0.9 to 1.1 Kg/L

62 - 72 Krebbs Units

40°C (Mixed)

4.5

Approved Color/s:

Black (Ral9005), Blue (Ral5000), Grey (Ral7023), Green (Ral6005/6021), Orange, Red (Ral3009/3002) White (Ral9010), Yellow (Ral1021), Beige (Mun10YR8/4) Blue (Ral5019), violet (Ral4001), Green (Mun2.5G3/6) Ivory (Mun2.5Y9/4), Navy Blue (Mun2.55PB2.5/6), Orange (Mun10YR5/12), Brown (Mun10R3/4), Yellow (Mun2.58/16)

4.6

Finish:

High Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 46 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B

Type of Coating

: Heat Resistant Silicone Primer/Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name :

Intertherm 50

SAP M/N (SAMS S/N)

:

1000196488 (09-687-325)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

12 months

Mixing

2.1

No. of Components 2.1.1 Base : HTA097 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio by volume

: N/A

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA007

(09-740-416)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 30%; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

56 µm

25 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 47 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B - Intertherm 50 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 18 m2/L

3.6 Minimum Number of Coats

:

1 (APCS 11A); 2 (APCS11B)

3.7

Applicable Substrate

: CS

3.8

Surface Preparation Requirements

: Abrasive blast Sa 3 or Sa 2½

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

16 hrs

14 hrs

10 hrs

6 hrs

4 hrs

Extended 16 hrs

7 days

  7 days

Extended 14 hrs

6 days 6 days

Extended 10 hrs

5 days 6 days

Extended 6 hrs

4 days

  4 days

Extended 4 hrs

3 days

  3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Intertherm 50 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Not Recommended

: Aircap 704 or 765. Fluid Tip E Atomizing Pressure 40-60psi

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

45%

                                                            ©Saudi Arabian Oil Company, 2021

Page 48 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B - Intertherm 50 (Cont’d)

4.2

Product Weight

(ASTM D1475)

:

1.13 Kg/L

4.3

4.4

Viscosity

(ASTM D562)

: 49-59 Krebbs Units

Flash Point

(ASTM D93 or D56)

:

23°C (Mixed)

4.5

Approved Color/s

: Aluminum

4.6

Finish

: Matt

Special Instructions: This product will not cure adequately below 5°C. Avoid over application

above 40µm DFT per coat.

                                                     ©Saudi Arabian Oil Company, 2021

Page 49 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C

Type of Coating

: Heat Resistant Cold Spray Aluminum Coating

Manufacturer

: AkzoNobel Middle East

Product Name :

Intertherm 751CSA

SAP M/N (SAMS S/N)

:

1000196488 (09-687-325)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

12 months

Mixing

2.1

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

                                         :

HTA398 HTA399

2

2.2 Mixing Ratio by volume

: 54 Parts : 1 Part

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA007

(09-740-416)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = 30%; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

164 µm

100 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 50 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - Intertherm 751CSA (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 24 m2/L

3.6 Minimum Number of Coats

:

2

3.7

Applicable Substrate

: Carbon steel. Stainless steel

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: CS = Abrasive blast Sa 3 or Sa 2½, SS = Sweep blast to 40 µm profile

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24 hrs

20 hrs

16 hrs

12 hrs

10 hrs

7 days 48 hrs

7 days

  7 days

7 days 24 hrs

6 days 6 days

7 days 16 hrs

5 days 6 days

7 days 12 hrs

4 days

   4 days

5 days 8 hrs

3 days

   3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Intertherm 751CSA thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

Airspray (Pressure Pot)

: Tip Range 15 - 19 thou

Total output pressure ≥2,000 psi

: Aircap 704 or 765. Fluid Tip E Atomizing Pressure 40 - 60psi

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 51 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - Intertherm 751CSA (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

61%

1.28Kg/L

Viscosity

(ASTM D562)

: 49-59 Krebbs Units

Flash Point

(ASTM D93 or D56)

:

25°C (Mixed)

4.5

Approved Color/s

: Aluminum

4.6

Finish

: Matt

Special Instructions:

This product will not cure adequately below 5°C. Avoid over application above 175µm DFT per coat. Suitable for operating temperatures up to maximum 400ºC (752ºF).

                                                            ©Saudi Arabian Oil Company, 2021

Page 52 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-12

Type of Coating

: Epoxy Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name :

Intergard 410

SAP M/N (SAMS S/N)

:

1000194629 (09-612-364), 1000194797 (09-612-369), or 1000194960 (09-612-375)

Use primer and topcoat of APCS-1B and refer to APCS-12 of Saudi Aramco Engineering Standard

SAES-H-001 for application of aggregate.

                                                     ©Saudi Arabian Oil Company, 2021

Page 53 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C

Type of Coating

: Glass Flake Epoxy

Manufacturer

: AkzoNobel Middle East

Product Name :

Interzone 1000

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

18 months

Mixing

2.1

No. of Components 2.1.1 Base : EAA490 2.1.2 Hardener (Curing Agent - C.A.) : EAA489

                                         :

2

2.2 Mixing Ratio by volume

: 3½ Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

: None

2.6

Pot Life

Application

:

1 hr at 25°C 30 mins at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

Typical Wet Film Thickness Per Coat

  :

543-815 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 54 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C - Interzone 1000 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

: 500 - 750 µm

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 37 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: Carbon Steel (CS)

3.8

Surface Preparation Requirements

: CS = Abrasive Blast Sa 2½

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

26 hrs

7 days 26 hrs

7 days

   7 days

                      20oC

12 hrs

4 days 12 hrs

6 days 6 days

                      30°C

                      40oC

                      50°C

8 hrs

5 hrs

3 hrs

2 days

    8 hrs

4 days 4 days

1 day 5 hrs

3 days

    3 days

1 day 3 hrs

3 days

    3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Interzone 1000 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 36 - 43 thou

Total output pressure ≥3,000 psi

Minimum pump Ratio 45:1

Airspray (Pressure Pot)

: Aircap 62. Fluid Tip AC

Brush

:

For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 55 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C - Interzone 1000 (Cont’d)

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

92%

1.3 Kg/L

Viscosity

(ASTM D562)

: N/A

4.4

Flash Point

(ASTM D93 or D56)

:

56°C (Mixed)

4.5

Approved Color/s

: Grey (other colors upon request)

4.6

Finish

: Not Applicable

Special Instructions: Do not use at cure temperatures below 5°C.

                                                            ©Saudi Arabian Oil Company, 2021

Page 56 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A

Type of Coating

: Epoxy Primer, damp tolerant

Manufacturer

: AkzoNobel Middle East

Product Name :

Interseal 414

SAP M/N (SAMS S/N)

:

1000104560 (09-612-352) ; 1000195239 (09-612-459)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : EPA414 2.1.2 Hardener (Curing Agent – C.A.) : EPA415

                                          :   2

2.2 Mixing Ratio by volume

: 4 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

:

5 hrs at 25°C 2 hrs at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

91 µm

50 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 57 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A - Interseal 414 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 22 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: Carbon Steel (CS); Stainless

Steel (SS)

: CS = Abrasive Blast Sa2½, St3; SS = Sweep blast to 50 µm profile

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

20 hrs

12 hrs

8 hrs

6 hrs

2 hrs

Extended 20 hrs

7 days

  7 days

Extended 12 hrs

6 days 6 days

Extended 8 hrs

5 days 6 days

Extended 6 hrs

4 days

  4 days

Extended 2 hrs

3 days

   3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Interseal 414 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 18 - 21 thou

Total output pressure ≥2,200 psi

Conventional Spray

: Aircap 704 or 765. Fluid Tip E

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 58 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A - Interseal 414 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

55%

1.5 Kg/L

125-150 Krebbs Units

35°C (Mixed)

4.5

Approved Color/s

: Red

4.6

Finish

: Matt

Special Instructions: This product will not cure adequately below 10°C.

                                                     ©Saudi Arabian Oil Company, 2021

Page 59 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A/22B

Type of Coating

: Epoxy Primer & Intermediate & Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name :

Interzone 954

SAP M/N (SAMS S/N)

:

1000647350 (09-000-461), 1000647351 (09-000-462), 1000647352 (09-000-463), 1000647353 (09-000-464), 1000669337 (09-000-489), 1000669338 (09-000-490), 1000669339 (09-000-491), or 1000669590 (09-000-492)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

18 months

Mixing

2.1

No. of Components 2.1.1 Base : EA Series 2.1.2 Hardener (Curing Agent – C.A) : EAA964

                                         :

2

2.2 Mixing Ratio by volume

: 4 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

: None

2.6

Pot Life

Application

:

1½ hrs at 25°C 45 mins at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

5°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

Typical Wet Film Thickness Per Coat

  :

353 µm

                                                            ©Saudi Arabian Oil Company, 2021

Page 60 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A/22B Interzone 954 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 300 µm

: 34 m2/L

3.6 Minimum Number of Coats

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: 2 for APCS-22A, 1 for APCS-22B

: Carbon Steel (CS) ; Stainless

Steel (SS)

: CS = Abrasive Blast Sa 2½, St3; SS = Sweep blast to 50 µm profile

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

24 hrs

Extended 24 hrs

8 days

   8 days

                      20oC

18 hrs

Extended 18 hrs

6 days 6 days

                      30°C

8 hrs

Extended 8 hrs

4 days 4 days

                      40oC

                      50°C

3 hrs

2 hrs

Extended 3 hrs

3 days

    3 days

Extended 2 hrs

3 days

    3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Interzone 954 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 21 - 26 thou

Total output pressure ≥2,500 psi

Minimum pump Ratio 45:1

                                                     ©Saudi Arabian Oil Company, 2021

Page 61 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A/22B - Interzone 954 (Cont’d)

Airspray (Pressure Pot)

: Aircap 62. Fluid Tip AC

Atomizing pressure 40 – 60 psi

Brush

:

For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

85%

1.62 Kg/L

115 - 125 Krebs Units

33°C (Mixed)

4.5

Approved Color/s

: Grey, Yellow, Black, White, Red, Orange, Blue

4.6

Finish

: Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 62 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26/26T

Type of Coating

: Epoxy Mastic

Manufacturer

: AkzoNobel Middle East

Product Name

SAP M/N (SAMS S/N)

:

:

Interseal 738

1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401 (09-612-332), 1000194407 (09-612-333), 1000194420 (09-612-334), 1000194427 (09-612-335), or 1000194471 (09-612-336)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : EY series 2.1.2 Hardener (Curing Agent – C.A.) : EYA001

                                          :   2

2.2 Mixing Ratio by volume

: 6.4 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA220

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

:

4 hrs at 25°C 2 hrs at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

Typical Wet Film Thickness Per Coat

  :

313 µm

                                                     ©Saudi Arabian Oil Company, 2021

Page 63 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26/26T - Interseal 738 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 250 µm

: 32 m2/L

3.6 Minimum Number of Coats

:

2

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: Carbon Steel (CS); Stainless

Steel (SS)

: CS- Abrasive Blast Sa 2½, St 2/3; SS- Sweep blast to 50 µm profile

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum

                      10°C

4 days

14 days

   3 days

8 days

   8 days

                      20oC

24 hrs

7 days

   24 hrs

6 days 6 days

                      30°C

20 hrs

5 days 18 hrs

4 days 4 days

                      40oC

                      50°C

16 hrs

12 hrs

3 days

    14 hrs

3 days

    3 days

2 days 12 hrs

3 days

    3 days

Before overcoating after exposure in a contaminated environment, clean the surface of Interseal 738 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 21 - 26 thou

Total output pressure ≥2,800 psi

Conventional Spray

: Not recommended

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 64 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26/26T - Interseal 738 (Cont’d)

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

:

:

:

:

80%

1.4 Kg/L

114 – 124 Krebs Units

23°C (Mixed)

4.5

Approved Color/s

: Aluminum, White, Orange, Red, Yellow, Grey, Black

4.6

Finish

: Not applicable

Special Instructions: This product is not intended for use at temperatures below 10°C.

                                                     ©Saudi Arabian Oil Company, 2021

Page 65 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26T Topcoat

Type of Coating

: Polyurethane Topcoat

Manufacturer

: AkzoNobel Middle East

Product Name

SAP M/N (SAMS S/N)

:

:

Interthane 990

1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)

Use APCS-26/26T as primer and Polyurethane Topcoat of APCS-1D as topcoat.

                                                            ©Saudi Arabian Oil Company, 2021

Page 66 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A

Type of Coating

: Ultra High Build Epoxy

Manufacturer

: AkzoNobel Middle East

Product Name :

Interzone 485

SAP M/N (SAMS S/N)

:

09-000-497

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : EAA485 2.1.2 Hardener (Curing Agent – C.A.) : EAA486

                                          :   2

2.2 Mixing Ratio by volume

: 4 Parts Base : 1 Part C.A.

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

International GTA203

09-000-498

2.4 Minimum-Maximum Thinning Requirements :

up to 5% by Volume

2.5

2.6

Induction Time

Pot Life

Application

: None

:

45 mins at 25°C 30 mins at 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min = N/A; Max = 85%

3.3

3.4

3.5

Typical Wet Film Thickness per Coat

Typical Dry Film Thickness per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

1,010 µm

1,000 µm

40 m2/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 67 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A - Interzone 485 (Cont’d)

3.6 Minimum Number of Coats

: 1

3.7 3.8

3.9

Applicable Substrate Surface Preparation Requirements

Drying Time at specified DFT

: Carbon Steel (CS) : CS = Abrasive Blast Sa2½

                  Substrate                        Recoat Interval            To Handle    To Service     Full Cure
               Temperature

Minimum Maximum#

                      10°C

                      20oC

72hrs

24hrs

4days

   72hrs

8days

   8days

3days

    24hrs

6days 6days

                      30°C

16hrs

2days

    16hrs

4days 4days

                      40oC

                      50°C

12hrs

8hrs

1day

1day

    12hrs

3days

    3days

    8hrs

3days

    3days

Overcoating with self Before overcoating after exposure in a contaminated environment, clean the surface of Interzone 485 thoroughly by high pressure fresh water washing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Range 30 thou

Total output pressure ≥4,000 psi Advised pump Ratio 64:1

Conventional Spray

: Not recommended

Brush

:

For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 68 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A - Interzone 485 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

99%

1.10 Kg/L

Viscosity

(ASTM D562)

: Not applicable

Flash Point

(ASTM D93 or D56)

:

63°C (Mixed)

Approved Color/s

: Grey

Finish

: Semi-Gloss

Special Instructions: Do not use at cure temperatures below 10°C.

                                                     ©Saudi Arabian Oil Company, 2021

Page 69 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

b. Belzona – Approved Products

APCS-27

Belzona 1591

APCS-28

Belzona 1391S / Belzona 1391T

                                                            ©Saudi Arabian Oil Company, 2021

Page 70 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-27

Type of Coating

: Solvent-Free Ultra Hybrid Epoxy Coating, Brush Grade

Manufacturer

: Belzona

Product Name

: Belzona 1591

SAP M/N (SAMS S/N)

:

1000767601

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components

                                         :

2

2.2 Mixing Ratio (Base : Curing Agent)

: 10.5 : 1 by volume

2.3

Thinner

: None

2.4 Minimum-Maximum Thinning Requirements : N / A

2.5

Induction Time

: None

2.6

Pot Life

Application

:

50 minutes @ 20°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 18°C to 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: Max. 85%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  : 600 – 1,000 microns

Typical Dry Film Thickness Per Coat

  : 600 – 1,000 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  : 40 m2 / liter

3.6 Minimum Number of Coats

  :  1

                                                     ©Saudi Arabian Oil Company, 2021

Page 71 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-27 - Belzona 1591 (Cont’d)

         3.7

Applicable Substrate

: CS, MS, SS

3.8

Surface Preparation Requirements

: Sa 2 ½, 3 mils (75 microns)

         3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      20oC

                      30°C

                      40oC

    16 hours          5 days

     4 hours           20 hours

     2.5 hours        5.5 hours

       3.10

Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush (Stiff Bristled)

: N / A

: N / A

:

stripe coat and regular application

Plastic Applicator (provided with the product) :

regular application

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

1.86 – 2.06 Kg/L

100 – 200 poise

74°C (PMCC Method)

Approved Color/s:

Dark Brown

Finish:

Semi-Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 72 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28

Type of Coating

: Spray Grade, Liquid Coating

Manufacturer

: Belzona

Product Name

: Belzona 1391S

SAP M/N (SAMS S/N)

:

1000180328, 1000180337, and 1000180390

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components

                                          :

2

2.2 Mixing Ratio (Base : Curing Agent)

: 4 : 1 by volume

2.3

Thinner

: None

2.4 Minimum-Maximum Thinning Requirements : N / A

2.5

Induction Time

: None

2.6

Pot Life

Application

:

45 minutes @ 20°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C to 40°C

3.2 Minimum-Maximum Allowable Relative Humidity

: 85%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  : 375 microns

Typical Dry Film Thickness Per Coat

  : 375 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  : 40 m2 / Liter

3.6 Minimum Number of Coats

  :  2

                                                     ©Saudi Arabian Oil Company, 2021

Page 73 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Belzona 1391S (Cont’d)

3.7

3.8

Applicable Substrate

Surface Preparation Requirements

: CS, MS, SS

: Sa 2½, 3 mils

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval *
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

12 – 16 hours 48 hours

     32 hours

 96 hours        96 hours

                      20oC

6 – 8 hours 24 hours

    10 hours         48 hours         48 hours

                      30°C

3 – 4 hours 18 hours

     8 hours          20 hours         20 hours

                      40oC

1.5 – 2 hours 8 hours

     4 hours          14 hours         14 hours

• The recoat interval values provided here are for humidity levels of >50%

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush

: Plural component heated airless spray

: N / A

: For stripe coat

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

1.60 – 1.76 Kg/L

44 poise

100°C (PMCC Method)

Approved Color/s

Blue, Grey

Finish

Semi-Gloss

Special Instructions: For valves, piping, fitting, and exchanger boxes.

                                                            ©Saudi Arabian Oil Company, 2021

Page 74 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28

Type of Coating

: Brush Grade, Liquid Coating

Manufacturer

: Belzona

Product Name

: Belzona 1391T

SAP M/N (SAMS S/N)

:

1000180328, 1000180337, and 1000180390

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components

                                          :

2

2.2 Mixing Ratio (Base : Curing Agent)

: 4 : 1 by volume

2.3

Thinner

: None

2.4 Minimum-Maximum Thinning Requirements : N / A

2.5

Induction Time

: None

2.6

Pot Life

:

45 minutes @ 20°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10ºC to 40°C

3.2 Minimum-Maximum Allowable Relative Humidity

: 85%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  : 450 microns

Typical Dry Film Thickness Per Coat

  : 450 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  : 40 m2 / Liter

3.6 Minimum Number of Coats

  :  2

3.7

Applicable Substrate

: CS, MS, SS

                                                     ©Saudi Arabian Oil Company, 2021

Page 75 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Belzona 1391T (Cont’d)

3.8

Surface Preparation Requirements

: Sa 2½, 3 mils

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval *
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      20oC

12 – 16 hours 24 hours

    24 hours       Post cure recommended

                      30°C

6 – 8 hours 24 hours

     12 hours        48 hours         48 hours

                      40oC

3 – 4 hours 12 hours

     5 hours          24 hours         24 hours

• The recoat interval values provided here are for humidity levels of <50%

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush (Stiff Bristled)

: N / A

: N / A

:

stripe coat and regular application

Plastic Applicator (provided with the product) : regular application

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

1.79 – 1.95 Kg/L

100 – 200 poise

100°C (PMCC Method)

Approved Color/s:

Blue, Grey

Finish:

Gloss

Special Instructions: For valves, piping, fitting, and exchanger boxes

                                                            ©Saudi Arabian Oil Company, 2021

Page 76 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

c. Carboline – Approved Products

APCS-1A Carbozinc 11 Carboguard 893 SG

APCS-1B Carboguard 893 SG

APCS-1C Carbozinc 858 Use Epoxy Topcoat of APCS-1A

Inorganic Zinc Primer: Solvent Based

Epoxy Topcoat

Epoxy Primer and Topcoat

Organic Zinc Epoxy Primer

APCS-1D Use APCS-1A as primer and intermediate coat Carbothane 134 Series (134 HP)

Polyurethane Topcoat

APCS-1E Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D

APCS-1F Use APCS-1C as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D

APCS-2A/C

Plasite 7159

APCS-2D

 Epoxy

Phenoline 187 Primer Phenoline 187 Finish

 Epoxy Phenolic
 Epoxy Phenolic

APCS-2E

Plasite 4550 Series (Plasite 4550 / Plasite 4550S)

 Novolac Epoxy

APCS-2G

Plasite 4301HT

APCS-3

Bitumastic 300M

APCS-4

 Novolac Epoxy Vinyl-Ester

  Coal Tar Epoxy

Carbocoat GP-40 Carbocoat GP-40 Aluminum Finish

  Alkyd Primer
  Alkyd Topcoat Aluminum Color

APCS-5A

Carbotherm 3300

  Waterborne Acrylic

                                                     ©Saudi Arabian Oil Company, 2021

Page 77 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Carboline – Approved Products (Cont’d)

APCS-5B

Carbotherm 551

APCS-6

  Waterborne Epoxy

Use Alkyd Primer of APCS-4 Carbocoat GP 62

  Alkyd Topcoat

APCS-9

Carboline 3630

APCS-11A

Use primer of APCS-1A Thermaline 4700

APCS-11B

  Chlorinated Rubber

Silicone Topcoat

Thermaline 4700 Aluminum

  Silicone Aluminum, Self-Priming System

APCS-12

Use Primer and Topcoat of APCS-1B

APCS-17A

Use Primer of APCS-1A

APCS-17B

Carbozinc 11 WB

APCS-19C

Carboguard 703GF

APCS-20A

Inorganic Zinc Primer: Water Based

Glass-filled Epoxy

Carboguard 151-2 (Hand Lay-Up)

Fiberglass Reinforced Epoxy

APCS-20B

Carboguard 151-2 (Spray Applied)

Fiberglass Reinforced Epoxy

APCS-22A

Carboguard 690

APCS-22B

Carboguard 690 GF

APCS-26

Carboguard 890

APCS-26T

Epoxy

Glass-filled Epoxy

Epoxy Mastic

Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

                                                            ©Saudi Arabian Oil Company, 2021

Page 78 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A

Type of Coating

: Inorganic Zinc Primer, Solvent Based

Manufacturer

: Carboline

Product Name

: Carbozinc 11

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Base: 12 months : Zinc: 24 months

Mixing

2.1

No. of Components

: 2

2.2 Mixing Ratio (Base : Hardener)

: 1:22 by weight

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

: Thinner# 26, or #254

: 6%

: N/A

: 8 hours @24°C

3.1 Maximum Allowable Substrate Temperature

: 93°C

3.2

3.3

3.4

Typical Wet Film Thickness per Coat

: N/A

Typical Dry Film Thickness Per Coat

: 50-75 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 24.9 m2/l

3.5 Minimum Number of Coats

: 1

                                                     ©Saudi Arabian Oil Company, 2021

Page 79 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Carbozinc 11 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

1 hour

¾ hour

¼ hour

24 hours Unlimited

18 hours Unlimited

16 hours Unlimited

N/A

N/A

N/A

3.7

Recommended Equipment

Airless Spray: Pump Ratio: Liters/Min Output: Material Line: Tip Size: Output Pressure:

Conventional Spray: Material Line: Fluid Tip:

Brush: Not recommended

30:1 11 min 9.5 mm ID min 0.48 – 0.58 mm 10.3 – 13.8 MPa

9.5 mm ID min 1.8 mm

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

: 85% zinc in dry film

Product Weight

(ASTM D1475)

: 10 kg

Viscosity

(ASTM D562)

:

Flash Point

(ASTM D93 or D56)

: Base: 13°C Zinc: N/A

Approved Colors: Green, Grey

Finish: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 80 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F

Type of Coating

: Epoxy Primer, Intermediate, or Topcoat

Manufacturer

: Carboline

Product Name

: Carboguard 893 SG

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

:

:

2

1:1 by volume

: Thinner #10

Thinning Requirements

:

12% by volume

2.4

2.5

2.6

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

: Not required

:

4 hours

:

:

:

:

:

140°F/60°C

175 microns

100 microns

24 m2/l

2

                                                     ©Saudi Arabian Oil Company, 2021

Page 81 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F - Carboguard 893 SG (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

24 hrs

24 hrs

365 days

30°C

50°C

4 hrs

1 hrs

4 hrs

365 days

1 hr

365 days

N/A

N/A

N/A

3.7

Recommended Equipment

Airless Spray:

     Pump Ratio:
     GPM Output:
     Material Hose:

Tip Size:

     Output PSI:

Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.)

         .017” –.021”
          2,100 – 2,300
          60 mesh

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush : Medium bristle brush for stripe coat and touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

62%

12 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 24°C / Part B: 24°C

Approved Colors:

Yellow, Orange, Red, Grey,

Finish:

Satin

                                                            ©Saudi Arabian Oil Company, 2021

Page 82 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F

Type of Coating

: Organic Zinc Epoxy Primer

Manufacturer

: Carboline

Product Name

: Carbozinc 858

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months

Thinning Requirements

:

up to 10% by volume

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

2.4

2.5

2.6

Thinner

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

2

2:1 approx. by weight

: Thinner #33

: Not required

:

4 hours

:

:

:

:

:

140°F/60°C

125 microns

75 microns

25 m2/l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 83 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F - Carbozinc 858 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

5 hrs

2 hrs

5 hrs

Unlimited

30 mins Unlimited

30 min

30 mins Unlimited

N/A

N/A

N/A

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) 017” –.023” 2,000 – 2,200 60 mesh

Conventional Spray :

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap.

Brush:

For stripe coat and touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

64%

20 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 24°C Part B: 24°C

Approved Colors:

Grey-Green

Finish:

Matte

                                                            ©Saudi Arabian Oil Company, 2021

Page 84 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat

Type of Coating

: Aliphatic Polyurethane Topcoat

Manufacturer

: Carboline

Product Name

: Carbothane 134 Series (134 HP)

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

2

4:1 by volume

: Thinner #25

:

0-15% by volume

: Not required

:

4 hours

3.1 Minimum-Maximum Allowable Substrate Temperature :

4°C – 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats

:

:

:

:

:

10% - 80%

100 microns

50 – 75 microns

26 m2/l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 85 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F Topcoat - Carbothane 134 Series (134HP) (Cont’d)

3.7

Drying Time

                        Substrate                       Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

 8 hours       Unlimited

    8 hours

 7 days             7 days

                      20oC

 4 hours       Unlimited

    4 hours

 3 days             3 days

                      30°C

 1 hours       Unlimited

    1 hours

 1 day

       1 day

                      40oC

 45 min        Unlimited           45 min

 1 day

       1 day

                      50°C

 30 min        Unlimited

    30 min

 1 day

       1 day

3.8

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 3.0 (min.) 3/8” I.D. (min.) .015”-.017” 2,100 – 2,400 60 mesh

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush: Medium, natural bristle brush for stripe coat and touch- up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

65%

1,30 – 1,40 Kg/L

1000 – 3000 cPs

: Part A: 32°C Part B: 53°C

Approved Colors:

Yellow, Orange, Red, Green, Grey, Aluminum

Finish:

Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 86 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/C

Type of Coating

: Epoxy, Amine-cured

Manufacturer

: Carboline

Product Name

: Plasite 7159

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

2.4

2.5

2.6

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

2

4:1 by volume

: Thinner #19

:

:

:

:

:

:

:

:

up to 10% by volume

30 minutes

8 hours

140°F/60°C

175 microns

125 microns

27 m2/l

3

                                                     ©Saudi Arabian Oil Company, 2021

Page 87 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/C - Plasite 7159 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

12 hrs

12 hrs

96 hrs

14 days

8 hrs

3 hrs

8 hrs

3 hrs

48 hrs

24 hrs

6-7 days

3-4 days

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) .017” –.023” 2,000 – 2,200 60 mesh

Conventional Spray :

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush : For stripe coat and touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

68%

12.5 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 108°C Part B: 104°C

Approved Colors:

Ivory, Light Grey

Finish:

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 88 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D

Type of Coating

: Epoxy Phenolic

Manufacturer

: Carboline

Product Name

: Phenoline 187 Primer

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months

Thinning Requirements

:

up to 25% by volume

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

2.4

2.5

2.6

Thinner

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

2

4:1 by volume

: Thinner # 2

: Not required

:

4 hours

:

:

:

:

140°F/60°C

190 microns

125 microns

25.6 m2/l

3.5 Minimum Number of Coats

:

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 89 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Phenoline 187 Primer (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

24 hrs

12 hrs

6 hrs

96 hrs

30 days

NR

12 hrs

7 days

6 hrs

2 days

7 days

4 days

3.7

Recommended Equipment

Airless Spray :

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 3.0 (min.) 3/8” I.D. (min.) 0.015” – 0.019” 2,000 – 2,300 60 mesh

Conventional Spray :

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, 0.055 – 0.070” I.D. fluid tip, and appropriate air cap.

Brush : For touch-up only

Technical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

65%

12.5 lbs

Viscosity

(ASTM D562) Part A - Brookfield #4 spindle @ 10 RPM is 20,000 – 40,000 cps Part B – No requirement (as supplied)

:

Flash Point

(ASTM D93 or D56)

: Part A: 19°C / Part B: 20°C

Color:

Finish:

Light Gray, Light Ivory, White, Red

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 90 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D

Type of Coating

: Epoxy Phenolic

Manufacturer

: Carboline

Product Name

: Phenoline 187 Finish

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months for off-white color (1898); 6 months for grey color (C703)

Thinning Requirements

:

up to 12% by volume

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

2.4

2.5

2.6

Thinner

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

2

4:1 by volume

: Thinner #2

: Not required

:

4 hours

:

:

:

:

140°F/60°C

190 microns

125 microns

25.6 m2/l

3.5 Minimum Number of Coats

:

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 91 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Phenoline 187 Finish (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

24 hrs

12 hrs

6 hrs

96 hrs

30 days

NR

12 hrs

7 days

6 hrs

2 days

7 days

4 days

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 3.0 (min.) 3/8” I.D. (min.) 0.015” – 0.019” 2,000 – 2,200 60 mesh

Conventional Spray :

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, 0.055-0.070” I.D. fluid tip and appropriate air cap.

Brush: For touch-up only

Technical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

63%

12.5 lbs

Viscosity

(ASTM D562) Part A - Brookfield #4 spindle @ 10 RPM is 20,000 – 40,000 cps Part B – No requirement (as supplied)

:

Flash Point

(ASTM D93 or D56)

: Part A: 19°C / Part B: 20°C

Color:

Finish:

Light Gray, Light Ivory, White

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 92 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2E

Type of Coating

: Novolac Epoxy

Manufacturer

: Carboline

Product Name

: Plasite 4550 Series (Plasite 4550 / Plasite 4550 S)

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

6 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

:

:

2

4:1 by volume

: Not Recommended

2.4

2.5

2.6

Thinning Requirements

: Not Recommended

Induction Time

Pot Life (mixture)

: Not Applicable

:

10 minutes

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

:

:

:

140°F/60°C

500 microns

500 microns

40 m2/l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 93 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2E - Plasite 4550 Series (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum* Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

12 hrs

12 hrs

36 hrs

8 hrs

3 hrs

8 hrs

3 hrs

24 hrs

24 hrs

48 hours

36 hours

24 hours

• Material may be recoated immediately; however the dry to handle times will govern

if the material has to be “walked-on”.

3.7

Recommended Equipment

  (Plural-component)

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Material Temp: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) Part A (43°C); Part B (35°C) .017” – .035” 2000 – 2200 60 mesh

Conventional Spray:

Not recommended

Brush: For stripe coat and touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

100%

12.5 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 94°C / Part B: 106°C

Approved Colors:

Light Grey, White, Light Blue, Tile Red

                                                            ©Saudi Arabian Oil Company, 2021

Page 94 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G

Type of Coating

: Novolac Epoxy Vinyl Ester, Glass Flake-Filled

Manufacturer

: Carboline

Product Name

: Plasite 4301 HT

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

2

4:1 by volume

: None

: None

: Not Applicable

:

30 minutes

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

:

:

:

140°F/60°C

550 microns

500 microns

34 m2/l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 95 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Plasite 4301 HT (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

12 hrs

12 hrs

7 days

5 hrs

2 hrs

5 hrs

2 hrs

7 days

3 hrs

96 hours

48 hours

24 hours

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) .020” – .035” 1,800 – 2,200 60 mesh

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush: For stripe coat and touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

85% (practical)

10.2 lbs

Flash Point

(ASTM D93 or D56)

: Part A: 31°C Part B: 80°C

4.5

Approved Colors:

Gray

                                                            ©Saudi Arabian Oil Company, 2021

Page 96 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3

Type of Coating

: Coal Tar Epoxy

Manufacturer

: Carboline

Product Name

: Bitumastic 300 M

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Part A: 12 months Part B: 36 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

2

4:1 by volume

: Thinner #10

:

16% by volume

: Not required

:

2 hours

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

:

:

:

140°F/60°C

300 microns

200 microns

29 m2/l

2

                                                     ©Saudi Arabian Oil Company, 2021

Page 97 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3 - Bitumastic 300 M (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

10 hrs

10 hrs

24 hours

14 days

6 hrs

3 hrs

6 hrs

3 hrs

24 hours

24 hours

3 days

2 days

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) .023” – .035” 2,100 – 2,500 60 mesh

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush: Medium bristle brush for stripe coat and touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

74%

11 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 24°C Part B: 24°C

4.5

Approved Colors:

Black, Red

                                                            ©Saudi Arabian Oil Company, 2021

Page 98 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6

Type of Coating

: Zinc Phosphate Pigmented Alkyd Primer (Lead Free)

Manufacturer

: Carboline

Product Name

: Carbocoat GP-40

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months at 75°F / 24°C

Mixing

2.1

No. of Components

2.2 Mixing Ratio

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

1

: Not applicable

: Carboline Thinner # 45

:

5% – 10%

: Not required

: N/A

:

:

:

:

:

49°C

108 microns

50 microns

18.4 m2 / l

2

                                                     ©Saudi Arabian Oil Company, 2021

Page 99 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Carbocoat GP-40 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

16 H

4 H

N/A

24 H

8 H

N/A

N/A

N/A

N/A

N/A

N/A

N/A

3.7

Recommended Equipment

Airless Spray:

Conventional Spray:

Graco, Binks, De Vilbiss Pump Ratio: 30:1 (min)

Pressure pot equipped with dual regulators

Brush:

Natural bristle brush

Technical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

Approved Colors:

Red, Grey, Off-White

Finish:

Flat

:

:

:

:

46%

22.6 kg

80 – 90 KU

102°F / 39°C

                                                            ©Saudi Arabian Oil Company, 2021

Page 100 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Aluminum Topcoat

Type of Coating

: Alkyd Topcoat, Aluminum Color

Manufacturer

: Carboline

Product Name

: Carbocoat GP-40 Aluminum Topcoat

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months at 75°F / 24°C

Mixing

2.1

No. of Components

2.2 Mixing Ratio

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

1

: Not applicable

: Carboline Thinner # 45

: Not required

: Not recommended

:

:

:

:

:

:

122°F (50°C)

100 – 150 microns

50 – 75 microns

18.4 m2 / l @ 25 microns

1 - 2

                                                     ©Saudi Arabian Oil Company, 2021

Page 101 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 - Carbocoat GP-40 Aluminum Topcoat (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

3 H

3 H

16 H

30 minutes

30 minutes 3 H

20 minutes 20 minutes 1 H

24 H

7 H

4 H

3.7

Recommended Equipment

Airless Spray

Conventional Spray

: Graco, De Vilbis

Pump Ratio: 30:1 (min)

: Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .043” I.D. fluid tip, and appropriate air cap.

Brush

: Use a synthetic bristle brush.

Technical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

46%

25 kg

80 – 90 KU

102°F (39°C)

                                                            ©Saudi Arabian Oil Company, 2021

Page 102 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-5A

Type of Coating

: Waterborne Acrylic

Manufacturer

: Carboline

Product Name

: Carbotherm 3300

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

1

: Not applicable

: Not required

: None

: Not required

:

Indefinite

:

:

:

:

300°F/149°C

550 microns

500 microns

35.4 m2/l

3.5 Minimum Number of Coats

: As needed

                                                     ©Saudi Arabian Oil Company, 2021

Page 103 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-5A - Carbotherm 3300 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

6 hrs

2 hrs

1 hrs

6 hrs

Indefinite

2 hrs

1 hrs

Indefinite

Indefinite

NR

NR

NR

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 3.0 (min.) 3/8” I.D. (min.) 0.021” – 0.025” 1,800 – 2,200 None

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, 0.070” I.D. fluid tip, and appropriate air cap.

Brush: For touch-up only

Technical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

90%

6.9 lbs

Viscosity

(ASTM D562) Brookfield #5 spindle @ 10 RPM is 12,000 to 18,000 cps

:

4.4

Flash Point

(ASTM D93 or D56)

: >200°F/93°C

                                                            ©Saudi Arabian Oil Company, 2021

Page 104 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-5B

Type of Coating

: Waterborne Epoxy

Manufacturer

: Carboline

Product Name

: Carbotherm 551

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

2.4

2.5

2.6

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

2

16 : 1 by volume

: Not required

: None

: Not required

:

1 hour

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

:

:

250°F/121°C

1,220 microns

1,000 microns

32.3 m2/l

3.5 Minimum Number of Coats

: As needed

                                                     ©Saudi Arabian Oil Company, 2021

Page 105 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-5B - Carbotherm 551 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

10 hrs

10 hrs

Indefinite

3 hrs

1 hr

3 hrs

Indefinite

1 hr

Indefinite

NR

NR

NR

3.7

Recommended Equipment

Airless Spray :

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 3.0 (min.) 3/8” I.D. (min.) 0.021” – 0.025” 1,800 – 2,200 None

Conventional Spray :

Pressure pot equipped with dual regulators, 1/2” I.D. minimum material hose, 0.070” I.D. fluid tip, and appropriate air cap.

Brush : For touch-up only

Technical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

82%

6.35 lbs

Viscosity

(ASTM D562) Part A: Brookfield #5 spindle @ 10 RPM is 9,000 to 15,000 cps Part B: Brookfield #4 spindle @ 20 RPM is 1,800 to 2,800 cps

:

4.4

Flash Point

(ASTM D93 or D56)

: Part A: >200°F/93°C Part B: 99°F/37°C

                                                            ©Saudi Arabian Oil Company, 2021

Page 106 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6

Type of Coating

: Modified Alkyd, Topcoat

Manufacturer

: Carboline

Product Name

: Carbocoat GP 62

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months at 75°F / 24°C

Mixing

2.1

No. of Components

2.2 Mixing Ratio

:

1

: Not applicable

2.3

2.4

2.5

2.6

Thinner

: Carboline Thinner # 85

Thinning Requirements

: Allowed up to 13%

Induction Time

Pot Life (mixture)

: Not required

: N/A

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

:

:

:

49°C

106 – 160 microns

50 – 75 microns

18.8 m2 / l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 107 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 - Carbocoat GP 62 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

10 H

4 H

N/A

10 H

4 H

N/A

72 H

24 H

N/A

N/A

N/A

N/A

3.7

Recommended Equipment

Airless Spray:

Graco, Binks, De Vilbiss Pump Ratio: 30:1 (min)

Conventional Spray:

Pressure pot equipped with dual regulators

Brush:

Synthetic bristle brush

Technical Properties

4.1

4.2

4.3

4.4

4.5

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

Approved Colors:

Various Colors

4.6

Finish:

Gloss

:

:

:

:

47%

18 kg approx.

150 – 180 seconds

50°F / 10°C

                                                            ©Saudi Arabian Oil Company, 2021

Page 108 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-9

Type of Coating

: Chlorinated Rubber

Manufacturer

: Carboline

Product Name

: Carboline 3630

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 months at 75°F / 24°C

Mixing

2.1

No. of Components

2.2 Mixing Ratio

:

1

: Not applicable

2.3

2.4

2.5

Thinner

: Carboline Thinner # 10

Thinning Requirements

: Allowed up to 13%

Induction Time

: Not required

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers

3.4 Dry Film Thickness

3.5 Minimum Number of Coats

:

:

:

:

:

49°C

187 microns

75 microns

16 m2 / l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 109 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-9 – Carboline 3630 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

10 H

4 H

N/A

10 H

3 days

4 H

N/A

24 H

N/A

N/A

N/A

N/A

3.7

Recommended Equipment

Airless Spray

: Graco, De Vilbis

Pump Ratio: 30:1 (min)

Conventional Spray

: Pressure pot equipped with dual

regulators

Brush

: Synthetic bristle brush.

Technical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

40%

25.8 kg approx.

10°C

                                                            ©Saudi Arabian Oil Company, 2021

Page 110 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A

Type of Coating

: Silicone, Topcoat

Manufacturer

: Carboline

Product Name

: Thermaline 4700

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 month

Mixing

2.1

No. of Components

2.2 Mixing Ratio

Thinner

:

:

1

Not Applicable

: Not required.

2.3

2.4

2.5

2.6

Thinning Requirements 235 for hot surface applications exceeding 66oC

:

10% by volume with Thinner #

Induction Time

Pot Life (mixture)

: Not required

: Not Applicable

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.5 Minimum Number of Coats

:

:

:

:

:

148°C

100 microns

50 microns

19 m2/l

1

                                                     ©Saudi Arabian Oil Company, 2021

Page 111 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A - Thermaline 4700 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C 24 hrs 10 hrs

Unlimited

Not Applicable

30°C

50°C

8 hrs

4 hrs

4 hrs

2 hrs

Unlimited

Not Applicable

Unlimited

Not Applicable

3.7

Recommended Equipment

Airless Spray:

Not Recommended

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush: Medium bristle brush

Technical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

48%

12 lbs

Viscosity

(ASTM D562) Brookfield viscosity (Spindle #3 @ 100 rpm): 300 – 900 cps typical

:

Flash Point

(ASTM D93 or D56)

:

25°C

Approved Colors:

Black, Grey, Aluminum

Finish:

Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 112 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11B

Type of Coating

: Silicone Aluminum, Self-Priming

Manufacturer

: Carboline

Product Name

: Thermaline 4700 Aluminum

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

24 month

Mixing

2.1

No. of Components

:

1

2.2 Mixing Ratio

2.3

2.4

2.5

2.6

Thinner

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

: Not Applicable

: Not required

:

10% by volume with Thinner

235 for hot surface

application exceeding 66°C

: Not required

: Not Applicable

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

:

:

148°C

100 microns

50 microns

19 m2/l

3.5 Minimum Number of Coats

:

2

                                                     ©Saudi Arabian Oil Company, 2021

Page 113 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11B - Thermaline 4700 Aluminum (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

24 hrs

10 hrs

Unlimited

Not Applicable

8 hrs

4 hrs

4 hrs

2 hrs

Unlimited

Not Applicable

Unlimited

Not Applicable

3.7

Recommended Equipment

Airless Spray:

Not Recommended

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip, and appropriate air cap.

Brush: Medium bristle brush

Technical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

48%

12 lbs

Viscosity

(ASTM D562) Brookfield viscosity (Spindle #3 @ 100 rpm): 300 – 900 cps typical

:

Flash Point

(ASTM D93 or D56)

:

25°C

Approved Color:

Aluminum

Finish:

Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 114 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-12

Type of Coating

: Epoxy Primer and Topcoat

Manufacturer

: Carboline

Product Name

: Carboguard 893 SG

SAP M/N (SAMS S/N)

:

Use primer and topcoat of APCS-1B and APCS-12 in SAES-H-001 for application of aggregates.

                                                     ©Saudi Arabian Oil Company, 2021

Page 115 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-17B

Type of Coating

: Inorganic Zinc Primer, Water Based

Manufacturer

: Carboline

Product Name

   :   Carbozinc 11 WB

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum : Base : 24 months Zinc : 24 months

Mixing

2.1

No. of Components : 2

2.2 Mixing Ratio (Base : Hardener) by weight : Base: 0.70 gal to Zinc Filler: 14.6 lbs

2.3

Thinner : Water

2.4

2.5

2.6

Thinning Requirements : Up to 20%

Induction Time : Not required

Pot Life (mixture) : 8 hours @24°C

Application

3.1 Maximum Allowable Substrate Temperature : 140°F/60°C

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat : N/A

Typical Dry Film Thickness Per Coat : 75-100 microns

Theoretical Coverage @ 25 Micrometers : 23.6 m2/l Dry Film Thickness

3.5 Minimum Number of Coats : One

                                                            ©Saudi Arabian Oil Company, 2021

Page 116 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-17B - Carbozinc 11 WB (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

10 min

36 hours Unlimited

N/A

30°C

50°C

5 min

2 min

18 hours Unlimited

10 hours Unlimited

N/A

N/A

3.7

Recommended Equipment

Airless Spray:

Conventional Spray:

30:1

Pump Ratio: Liters/Min Output: 11 min Material Line: 9.5 mm ID min Tip Size: 0.48 – 0.58 mm Output Pressure: 10.3-13.8 MPa

Material Line: 9.5 mm ID min Fluid Tip: 1.8 mm

Brush:

Not recommended

Technical Properties

4.1

Volume Solids

(ASTM D2697)

: 60% (83% zinc in dry film)

4.2

4.3

Product Weight

(ASTM D1475)

: 11.4 kg

Viscosity

(ASTM D562) Base (Part A) Spindle #2 at 100 RPM — 100 to 250 cps Zinc Filler Type II — N/A

:

4.4

Flash Point

(ASTM D93 or D56) Base: >200°F/93°C

Zinc: N/A

                                                     ©Saudi Arabian Oil Company, 2021

Page 117 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C

Type of Coating

: Epoxy, Amine Cured

Manufacturer

: Carboline

Product Name :

Carboguard 703 GF

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

18 months at 75 °F / 24 °C

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

2.4

2.5

2.6

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

3 Components

5 : 1 by volume + 1 bag Glass Flake (3.125kg)

: Not recommended

: Not recommended

: Not required

:

30 minutes at 24 °C

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

:

:

52 °C

400 - 3125 microns

400 – 3125 microns

39 m2 / l

3.5 Minimum Number of Coats

:

2

                                                            ©Saudi Arabian Oil Company, 2021

Page 118 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C - Carboguard 703 GF (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

24 H

14 days

14 days

10°C

30°C

24 H

6 H

50°C 1.3 H 1.3 H

4.5 H

6 H

7 days

7 days

2 days

3.7

Recommended Equipment

Airless Spray

: Graco, De Vilbis

Pump Ratio: 45:1 (min)

Conventional Spray

: Not recommended

Brush

: For touch up and limited areas

Technical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

only

95 %

35.5 kg approx.

90 – 105 KU

4.4

Flash Point

(ASTM D93 or D56)

: Part A: > 392 °F (200 °C)

Part B: > 205 °F (96 °C) Part C: > Not Applicable

4.5

Color:

Gray, Buff

4.6

Finish:

Eggshell

                                                     ©Saudi Arabian Oil Company, 2021

Page 119 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A

Type of Coating

: Modified Epoxy Polyamide

Manufacturer

: Carboline

Product Name :

Carboguard 151-2 (Hand Lay-Up)

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months at 75 °F / 24 °C

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

2.4

2.5

2.6

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

2 Components

2: 1 by volume

: Not recommended

: Not recommended

: Not required

:

85 minutes at 24 °C

1st LAYER GRE LAMINATION Prepare Carboguard 151-2 (Part A&B) resin mix for GRE Laminate application in the ratio (2:1) as per Datasheet. Apply resin mixture by using brush or roller at WFT of 900 microns. Hand lay 1st layer chopped strand mats (minimum 300 gram/m²) with 10 cm overlap on adjacent mats (DFT-1200 microns) Compact GRE mat by rolling with steel rollers and ensure mat layer is completely wet with resin mix.

2nd LAYER GRE LAMINATION Ensure correct over-coating time as per the data-sheet is maintained and Prepare Carboguard 151-2 (Part A&B) resin mix for GRE Laminate application in the ratio(2:1) as Datasheet. Apply resin mixture by using brush or roller at WFT of 900 microns.



 







                                                            ©Saudi Arabian Oil Company, 2021

Page 120 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Carboguard 151-2 Hand Lay-Up (Cont’d)







   



Hand lay 2nd layer chopped strand mats (Minimum 300 gram/m²) with 10cm overlap on adjacent mat Compact GRE mat by rolling with steel roller and ensure mat layers are completely wet with resin mix (DFT-1200 microns.)

3rd LAYER SURFACE TISSUE LAMINATION After Curing/Drying (Follow the over coating interval as per data-sheet) Prepare Carboguard 151-2(Part A&B) resin mix for Surface tissue application in the ratio(2:1) as per Datasheet. Apply resin mixture by using brush or roller at WFT of 300 microns. Hand lay tissue layer with 10 cm overlap on adjacent layers. (300-microns) Compact tissue layer with steel rollers and mat layers wet with resin mix. Rollout and remove any entrapped air in between.

FINAL COAT (GEL COAT) The whole laminate shall be coated with Carboguard 151-2(Part A&B) resin as a seal coat using brush / roller or Airless spray. (Min:50 microns)

3.1 Maximum Allowable Substrate Temperature

:

40 °C

3.2

Typical Wet Film Thickness Per Coat

: Laminate (glass fiber Matt): 50-56 mils (1200-

1400 microns) wet, according to specification. Gel Coat: 10-20 mils (250-300 microns)

3.3

3.4

Typical Dry Film Thickness Per Coat

: Same as WFT

Theoretical Coverage @ 25 Micrometers Dry Film Thickness (gel coat)

:

39.6 m2 / l

3.5 Minimum Number of Coats

:

2

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

56 H

12 H

6 H

56 H

96 H

12 days

12 H

6 H

48 H

24 H

3 days

2 days

                                                     ©Saudi Arabian Oil Company, 2021

Page 121 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Carboguard 151-2 Hand Lay-Up (Cont’d)

3.7

Recommended Equipment

Airless Spray

: Graco, De Vilbis

Pump Ratio: 2:1 (min)

Conventional Spray

: Two component airless units are

Brush

Technical Properties

recommended

: Recommended for small areas and touch-up only. Use natural bristle brush applying with full strokes. Avoid re-brushing. Use short nap mohair roller with phenolic core.

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

99 %

1.690 lbs/768 kg approx.

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

: Part A: 80-120 KU Part B: 75 – 140 KU

: Part A: 200 °F (93 °C) Part B: 200 °F (93 °C)

                                                            ©Saudi Arabian Oil Company, 2021

Page 122 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B

Type of Coating

: Modified Epoxy Polyamide

Manufacturer

: Carboline

Product Name

  :   Carboguard 151-2 (Spray Applied)

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months at 75 °F / 24 °C

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

2.4

2.5

2.6

Thinning Requirements

Induction Time

Pot Life (mixture)

Application

:

:

2 Components

2: 1 by volume

: Not recommended

: Not recommended

: Not required

:

85 minutes at 24 °C

• Prior to application of the gel coat, the entire surface to be coated should be abraded to remove any protruding fiberglass strands or other irregularities. The surface should then be vacuum cleaned.

• Requires special airless spray equipment with heated tanks and hoses, and in-line mixing. Consult Carboline for availability of equipment and application specialist to assist with the application. Carboguard 151-2 is designed to be applied at the specified film thickness in a single coat, multiple pass application. Brush application should be used for stripe coats and touch-up only.

• Airless spray using heated plural component equipment capable of accurate proportioning. Recommended tip sizes are as follows: 27-36 thou (0.68-0.91 mm) for laminate application; 31- 36 thou(0.79-0.91 mm) for gel coat application. Spray apply Carboguard 151-2 together with the chopped 450 kg per m2 fiberglass roving, then consolidate to a 50-56 mils (1250-1400 microns) dry film thickness laminate by rolling the mixture with a ribbed roller. Consult

                                                     ©Saudi Arabian Oil Company, 2021

Page 123 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B - Carboguard 151-2 Spray Applied (Cont’d)

specified record minimum for application of gel coat [unreinforced 10-20 mils (250-500 microns) dry film thickness], giving an overall system minimum thickness of 60-76 mils (1500-1900 microns) dry film thickness.

3.1 Maximum Allowable Substrate Temperature

:

40 °C

3.2

Typical Wet Film Thickness Per Coat

: Laminate (glass fiber

reinforced): 50-56 mils (1250-1400 microns) wet, according to specification.

Gel Coat: 10-20 mils (250-500 microns)

3.3

3.4

Typical Dry Film Thickness Per Coat

: Same as WFT

Theoretical Coverage @ 25 Micrometers Dry Film Thickness (gel coat)

:

39.6 m2 / l

3.5 Minimum Number of Coats

:

1

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

56 H

12 H

6 H

56 H

96 H

14 days

12 H

6 H

48 H

24 H

7 days

2 days

3.7

Recommended Equipment

Airless Spray

: Pump Ratio: 30:1 (min)

GPM Output:3.0 (min.)

Material Hose:3/8” I.D. (min.) Tip Size: .017-.021” Output PSI:2100-2300 Filter Size: 60 mesh *Teflon packings are

recommended and available from pump manufacturer. Use 45:1 pump ratio for elevated applications and ½” I.D. for hose lengths greater than 60’

                                                            ©Saudi Arabian Oil Company, 2021

Page 124 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B - Carboguard 151-2 Spray Applied (Cont’d)

Conventional Spray

: Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap.

Brush

: Use a medium bristle brush

Technical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

99 %

1.690 lbs/768 kg approx.

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

: Part A: 80-120 KU Part B: 75 – 140 KU

: Part A: 200 °F (93 °C) Part B: 200 °F (93 °C)

                                                     ©Saudi Arabian Oil Company, 2021

Page 125 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A

Type of Coating

: Epoxy

Manufacturer

: Carboline Company

Product Name

: Carboguard 690

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Part A: 24 months Part B: 12 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

:

:

2

4:1 by volume

: Thinner #2

2.4

2.5

2.6

Thinning Requirements

:

12% by volume

Induction Time

Pot Life (mixture)

: Not required

:

1.5 hours

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

:

:

140°F/60°C

175 microns

100-150 microns

31 m2/l

3.5 Minimum Number of Coats

:

2

                                                            ©Saudi Arabian Oil Company, 2021

Page 126 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A - Carboguard 690 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

12 hrs

12 hrs

30-60 days

20 days

2 hrs

1 hrs

2 hrs

1 hrs

30-60 days

6 days

30-60 days

2-3 days

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) .017”-.021” 2000-2500 60 mesh

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap.

Brush:

Medium bristle brush

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

80%

13 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 33°C / Part B: 27°C

4.5

Approved Colors:

Yellow, Black, Light Grey

4.6

Finish:

Semi-Gloss

                                                     ©Saudi Arabian Oil Company, 2021

Page 127 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22B

Type of Coating

: Epoxy, Glass-Filled

Manufacturer

: Carboline

Product Name

  :  Carboguard 690  GF

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Part A: 24 months Part B: 12 months Glass Flake: 60 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

:

:

3

4:1 by volume (liquids)

2.3

Thinner

: Thinner #2

Thinning Requirements

:

12% by volume

2.4

2.5

2.6

Induction Time

Pot Life (mixture)

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: Not required

:

1.5 hours

:

:

:

:

140°F/60°C

400 microns

300 microns

32 m2/l

3.5 Minimum Number of Coats

:

1

                                                            ©Saudi Arabian Oil Company, 2021

Page 128 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22B - Carboguard 690 GF (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

12 hrs

12 hrs

30-60 days

20 days

30°C

50°C

2 hrs

1 hrs

2 hrs

1 hrs

30-60 days

6 days

30-60 days

2-3 days

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) .035”-.041” 2000-2500 None

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .110” I.D. fluid tip and appropriate air cap.

Brush:

Medium bristle brush

Technical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

4.5

Approved Colors:

Yellow, Black, Light Grey

4.6

Finish:

Semi-Gloss

80%

15 lbs

Part A: 33°C / Part B: 27°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 129 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26

Type of Coating

: Epoxy Mastic, Self-Priming

Manufacturer

: Carboline

Product Name

: Carboguard 890

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Part A: 36 months Part B: 12 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (Base : Hardener)

2.3

Thinner

:

:

2

1:1 by volume

: Thinner #33

2.4

2.5

2.6

Thinning Requirements

:

12% by volume

Induction Time

Pot Life (mixture)

: Not required

:

3 hours

Application

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

:

:

140°F/60°C

175 microns

100-150 microns

30 m2/l

3.5 Minimum Number of Coats

:

2

                                                            ©Saudi Arabian Oil Company, 2021

Page 130 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26 - Carboguard 890 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum To Immersion

Recoat Interval

10°C

30°C

50°C

12 hrs

12 hrs

30-60 days

NR

4 hrs

2 hrs

4 hrs

2 hrs

30-60 days

3-5 days

30-60 days

2-3 days

3.7

Recommended Equipment

Airless Spray:

Pump Ratio: GPM Output: Material Hose: Tip Size: Output PSI: Filter Size:

30:1 (min.) 2.5 (min.) 3/8” I.D. (min.) .017”-.021” 2100-2300 60 mesh

Conventional Spray:

Pressure pot equipped with dual regulators, 3/8” I.D. minimum material hose, .070” I.D. fluid tip and appropriate air cap.

Brush:

Medium bristle brush

Technical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

75%

13 lbs

:

:

:

Flash Point

(ASTM D93 or D56)

: Part A: 32°C / Part B: 23°C

Approved Colors:

Yellow, Orange, Red, Black, Light Grey, Aluminum

Finish:

Gloss

                                                     ©Saudi Arabian Oil Company, 2021

Page 131 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26T

Type of Coating

: Epoxy Mastic, Self-Priming

Manufacturer

: Carboline

Product Name

: Carboguard 890

SAP M/N (SAMS S/N)

:

Use APCS-26 Data Sheet.

                                                            ©Saudi Arabian Oil Company, 2021

Page 132 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26T

Type of Coating

: Aliphatic Polyurethane Topcoat

Manufacturer

: Carboline

Product Name

: Carbothane 134 Series (134 HP)

SAP M/N (SAMS S/N)

:

Use APCS-1D/E/F Topcoat Data Sheet.

                                                     ©Saudi Arabian Oil Company, 2021

Page 133 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

d. CeraTech – Approved Products

APCS-5A

CeraTech 901*

ClearCoat 50*

*Note: Refer to coating manufacturer’s Product Data Sheets for the above products.

                                                            ©Saudi Arabian Oil Company, 2021

Page 134 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

e. Ciba S. C. – Approved Materials

APCS-20A

Araldite GY 257

Fiberglass Reinforced Epoxy: Hand Applied

                                                     ©Saudi Arabian Oil Company, 2021

Page 135 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A

Type of Coating

: Fiberglass Reinforced Epoxy; Hand-Applied

Manufacturer

: Ciba Specialty Chemicals, Switzerland

Product Name

: Araldite GY 257 (Curing Agents HY 830 and HY 850)

SAMS S/N

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components

2.2 Mixing Ratio

2.3

Thinner

SAMS S/N

2.4

2.5

2.6

Thinning Requirements

Induction Time

Pot Life (GY 257 + HY 830 + HY 850); Measured with TECAM gel timer @ 65% relative humidity. (1 kg. mixture)

Installation Procedure

3.1

Surface Preparation

:

:

3

100:52:8; GY 257: HY 830: HY 850 (by weight)

: N/A (clean up only)

: None

: Nil

: Not Applicable

: 3 hrs. 45 mins. @ 20°C

3.1.1 The surface is degreased and cleaned to ensure the removal of all oil, grease, salts, dirt, and other surface contaminants prior to further surface preparation.

3.1.2 Prior to the start of the blasting work, all the surface irregularities including

weld spatters, weld fluxes, rough capping, etc., shall be removed or smoothed using mechanical tools. The surface is blasted to SA 2 ½ (near white metal).

                                                            ©Saudi Arabian Oil Company, 2021

Page 136 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Araldite GY 257 (Cont’d)

3.1.3 Blasted surfaces shall be vacuumed or blown clean, and extra care should be taken to avoid contamination of the blast cleaned surface. Severe corrosion, undercuts, or weld porosity (larger than 1 inch in diameter) should be reported for remedial work

3.1.4 Priming shall take place while surface preparation is still fresh (directly after

blasting and before oxidation). The overall steel surfaces such as the shell wall, support column, tank floor, and bottom shall be primed with a solvent based epoxy to a dry film thickness (DFT) of 25-30 microns (~1 mil).

3.2

Caulking

Caulking shall be applied on all sharp edges, mainly between shell and floor, between floor plates, in and around sumps, around connection between pipes and hull, and around support pipes.

3.2.1 For the area between the shell and the floor, the amount of filler will determine the sharpness of the turn. The sharper the turn, the more difficult it becomes to construct a laminate that is free from wrinkles and air bubbles, and therefore must be avoided. Use minimal epoxy filler as necessary to make the turn. A throat of approximately 5 cm is usually adequate.

3.2.2 Caulking between the floor plates shall be applied directly before lamination,

and while the epoxy mortar is still wet, lamination on the floor can proceed.

3.3

Landing Plates

In floating roof tanks, steel panel may be inserted under the support legs. Landing plates (~6 mm thick) are first blast cleaned and primed on both sides, and the lamination system is applied to one side only. While still wet, sand (clean and dry) is sprinkled on the perimeter to provide for subsequent mechanical bond. While blast cleaning is in progress, work shall start on the landing legs in the following manner:

3.3.1 The welds on the striker plate are caulked.

3.3.2 Two to three hydraulic jacks are placed around the leg on timber spreaders,

clear of the area to be lined, and the roof is lifted about 15 mm. The pin holding the leg is removed, and the leg is raised.

3.3.3 The area under the leg is cleaned.

                                                     ©Saudi Arabian Oil Company, 2021

Page 137 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Araldite GY 257 (Cont’d)

3.3.4 The lining is applied so it extends 10 cm from the landing plate. The lining

should be resin rich in the center.

3.3.5 The prepared plate is placed, laminate side up, and forced slightly in the wet

laminate. The system is allowed to set, the leg is lowered, the pin replaced and the jacks are released.

3.3.6 Any gaps between the landing plate and the striker plate should be filled with

epoxy mortar (caulking).

3.4

Laminate Application

3.4.1 Apply a generous amount of epoxy mix (~500 microns) onto the primed steel

surface, as evenly as possible.

3.4.2 Apply one layer of 450 g/m² fiberglass chopped strand mat (CSM) to the wet

epoxy mix.

3.4.3 Embed fully to remove wrinkles and roll with steel roller to remove trapped air.

Add resin where required and consolidate well with steel roller.

3.4.4 Apply a second generous coating of Epoxy mix.

3.4.5 Apply the second layer of 450 g/m² fiberglass CSM with a 50% of the nominal

width of the mat overlap on the previous layer in order to achieve a 2 layer system. Care should be taken to ensure the second layer is overlapping the previous one with the untrimmed edge.

3.4.6 Repeat smoothing and rolling as in step 3.4.3 and add resin mix if required.

3.4.7 Lay a surfacing tissue of 30 g/m² in such a manner that it overlaps the mat

without aligning with mat edge, and ensuring that the strands of mat are not exposed or protruding @ the laminate surface.

3.4.8 Repeat smoothing and rolling as in step 3.4.3.

3.4.9 Apply a fourth coat of Epoxy mix/ gel coat to give a resin rich finish.

3.5

Repair of Defects

3.5.1 Air inclusion shall be cut out to a tapered edge, sanded around, and application of mat and tissue carried out with an overlap of 50mm on the sound laminate. If the overcoating interval was exceeded, the overlap shall be of 100 mm.

                                                            ©Saudi Arabian Oil Company, 2021

Page 138 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Araldite GY 257 (Cont’d)

3.5.2 Overlaps of less than 30mm shall be patched with a strip 100 mm wide.

3.5.3 Areas where the laminate does not appear to be resin rich shall be patched with

an extra layer of surface tissue and resin.

3.6 Maximum Allowable Substrate Temperature

:

55°C

3.7

Drying Time

Substrate Temperature

To Handle Minimum Maximum

Full Cure

Recoat Interval

20°C

40°C

50°C

30 Hours

20 Hours

40 Hours

30 Hours

10 Hours

7 Hours

15 Hours

11 Hours

3 Hours

3 Hours

7 Hours

5 Hours

In case overcoating interval is past the maximum limit, abrade the cured film with sand paper or sweep blast prior to application of fresh coat.

3.8

Recommended Equipment

Hand application only.

Technical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity (@25°C)

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

1.12 kg/l

1,400 m Pa S

138°C (GY 257) 183°C (HY 830) 163°C (HY 850)

                                                     ©Saudi Arabian Oil Company, 2021

Page 139 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Araldite GY 257 (Cont’d)

Related Materials:

1. Fiberglass Mat: Vetrotex® M4 40 P3 (Emulsion bonded) by Vetrotex International,

Scandinavian Glass fiber (MK 12) by Owens Corning or equivalent.

2. Surfacing Tissue: Fiberil® T 1773; 30-40 g/m²; Manufactured by Carl Freudenberg.

3. Primer: Hempel’s Hempadur 15590 or approved equivalent.

4. Caulking (either):

4.1 100 parts resin mix and 20 parts Aerosil 202, Cabosil or equivalent

4.2 Hempadur Caulking 3588

                                                            ©Saudi Arabian Oil Company, 2021

Page 140 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

f.

Corrocoat – Approved Products

                 APCS-2G

Polyglass VEF

                 APCS-28

Corroglass 600 Series (Corroglass 602, 632, 652)

                 APCS-28

Polyglass VEF

Vinyl Ester

Vinyl Ester

Vinyl Ester

                                                     ©Saudi Arabian Oil Company, 2021

Page 141 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G

Type of Coating

: Vinyl Ester Coating

Manufacturer

: Corrocoat

Product Name : Polyglass VEF

SAP M/N (SAMS S/N)

: Base plus catalyst in one box 1000709300 (09-000-502);

Retarder 1000709303 (09-000-505)

Storage

1.1

Store in accordance with manufacturers recommendations. Shelf life, sheltered storage @ 20°C maximum: 6 months Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life. See ‘Other Information Shelf Life Corrocoat Data Sheet 8/02’

Mixing

2.1

No. of Components

                                    :   3 (Three)

2.2 Mixing Ratio : Base 19.6 liters : Hardener 400 ml :

Retarder 50 ml (see Note in 7 Special Instructions)

2.3

Thinner See Note in 7 Special Instructions

: N/A

Cleaning Agent : Styrene Monomer Inhibited

SAP M/N (SAMS S/N) : 1000709301 (09-000-503-00)

Cleaning Solvent

: Methyl Ethyl Ketone or

                                                                                                           Acetone must be used within the
                                                                                                           pot life of the product for
                                                                                                           cleaning spray equipment and
                                                                                                           lines.

2.4 Minimum-Maximum Thinning Requirements : N/A

See Note in 7 Special Instructions

2.5

Induction Time : N/A

                                                            ©Saudi Arabian Oil Company, 2021

Page 142 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Polyglass VEF (Cont’d)

2.6

Pot Life : At 20°C w/out Retarder- 50 mins Pot Life will vary significantly At 30°C w/out Retarder- 30 mins with temperature but generally At 20°C with Retarder- 50 mins 50 – 60 minutes using P 2.45 At 30°C with Retarder- 30 mins catalyst. See note in Section 7

Application

3.1 Minimum-Maximum Allowable Substrate Temperature: Min 0°C – Max 90°C

Substrate Temp at least 3°C above dewpoint

Refer to Corrocoat Technical Services for application at high temperatures

3.2 Minimum-Maximum Allowable Relative Humidity : Min 0% – Max 90% RH

Substrate Temp at least 3°C above dewpoint

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

:   800 microns

Typical Dry Film Thickness Per Coat

:  Approx. 700 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:  39.6 m2/L

This is a theoretical figure Only. Coating would never be applied at this film thickness

3.6 Minimum Number of Coats

:  1

3.7

Applicable Substrate

:  Carbon Steel

Stainless Steel/ Stainless Alloys Aluminum

Cast Iron/Steel

Other Non- Ferrous Alloys Concrete with appropriate primer

                                                     ©Saudi Arabian Oil Company, 2021

Page 143 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Polyglass VEF (Cont’d)

3.8

Surface Preparation Requirements:

On metallic substrates

Abrasive Blast Cleaning to a Cleanliness Standard/Equivalent Cleanliness Standard of Sa 2 ½ near Sa 3 with a minimum surface profile of 50 microns using the appropriate approved type of abrasive. Non-ferrous abrasive for nonferrous substrates.

On concrete substrates

Abrasive Blast Cleaning to remove all surface contaminants, surface laitance and weak frangible material. Followed by priming with appropriate primer in accordance with Corrocoat Procedures detailed in Corrocoat User Data Sheet SP5 Concrete Preparation and Priming

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval       To Handle     To Service     Full Cure
               Temperature

Minimum* Maximum **

                      10°C

5 hrs

3 days

24 hrs

6 days

6 days

                      20oC

2 ½ hrs

2 days

18 hrs

4 days

4 days

                      30°C

1 ¾ hrs

1½ days 12 hrs

3 days

3 days

                      40oC

1 hr

1 day

6 hrs

1½ days

1½ days

                      50°C

< 1 hr

6 hrs

6 hrs

1 day

1 day

• There is no minimum overcoating time on the Polyglass VEF, this product is solvent free and may be overcoated as soon as the previous coat has gelled and can support the weight of the next coat. In practice this is generally for tank coating the time period before you can walk on the coating to apply the next coat. All values assume good ventilation.

** Immersion times will depend on the service environment and should be checked with Corrocoat/Hertel OTC for the actual service duty. For reference purposes we have assumed a medium service duty oil process vessel.

                                                            ©Saudi Arabian Oil Company, 2021

Page 144 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Polyglass VEF (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Pump ratio 45:1 minimum Spray Tip Size 0.031 to 0.035 inch Fluid pressure : 3000 psi Spray Hose : 3/8 inch bore

Conventional Spray

: Not Recommended

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids (ASTM D2697)

:

99%

Corrocoat assesses Volume Solids in accordance with BS-ISO EN 3251:2008 Nominally greater than 99%. This material contains volatile liquid monomers, convertible to solids. In consequence volume solids and WFT/DFT ratios will vary, dependent on polymerization conditions. As guidance, a wet film of 500microns will normally achieve approximately 425microns DFT.

4.2

Product Weight (ASTM D1475) Corrocoat assesses Product Weight in accordance with BS 3900: Part A12 1975

1.19 Kg/L

:

Base: 1.19 gcm3

Hardener: 1.07 gcm3

4.3

Viscosity (ASTM D562) Corrocoat assesses Viscosity in accordance with BS 2782: Part 7 M730B 1994

:

25,000 – 40,000 Centipoise

4.4

Flash Point (ASTM D93 or D56) Corrocoat assesses Flash Point in accordance with BS 900: Part A9 1986

28 °C

:

Flash Point: 28 °C

                                                     ©Saudi Arabian Oil Company, 2021

Page 145 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Polyglass VEF (Cont’d)

4.5

Approved Color/s Other colors are available on request but the addition of dyes adversely affects chemical resistance and air inhibition suppressant is required for color stability.

: Standard. Off White.

4.6

Finish

: Semi-Gloss

5. Special Instructions:

Reference item 2.3

Polyglass VEF is adversely affected by the addition of solvents and their use is prohibited.

Reference Item 2.4

Thinning can be achieved by the addition of no more than 1 liter of styrene monomer per 20 liters of Polyglass. It should be noted that dilution with styrene may affect hold up and chemical resistance.

Reference Item 2.6

*At high ambient temperatures retarder may be used to extend pot life but should be added to the base and thoroughly mixed before addition of the hardener in accordance with the manufacturer procedures.

                                                            ©Saudi Arabian Oil Company, 2021

Page 146 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28

Type of Coating

: High Build Vinyl Ester Glassflake Lining Material

Manufacturer

: Corrocoat

Product Name

: Corroglass 602

SAP M/N (SAMS S/N)

:

Storage

1.1

Store in accordance with manufacturers recommendations. Shelf life, sheltered storage @ 20°C maximum: 6 months Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life. See ‘Other Information Shelf Life Corrocoat Data Sheet 8/02’

Mixing

2.1

No. of Components

                                       :  2 (Two)

2.2 Mixing Ratio : Base 19.6 liters: Hardener 400 ml

2.3

Thinner See Note in 7 Special Instructions

 :  N/A

Cleaning Agent

SAP M/N (SAMS S/N)

Cleaning Solvent

: Styrene Monomer Inhibited : 1000709301 (09-000-503-00)

: Methyl Ethyl Ketone or

Acetone must be used within the pot life of the product for cleaning equipment.

2.4 Minimum-Maximum Thinning Requirements : N/A

See Note in 7 Special Instructions

2.5

Induction Time

: N/A

                                                     ©Saudi Arabian Oil Company, 2021

Page 147 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 602 (Cont’d)

2.6

Pot Life

: At 20°C - 40mins Pot Life will vary significantly At 30°C - 30mins with temperature but generally

40 - 50 minutes at 20°C using P 2 catalyst. See note in Section 7

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : Min 0°C – Max 90°C

Substrate Temp at least 3°C above dewpoint

Refer to Corrocoat Technical Services for application at high temperatures : Min 0% – Max 90% RH

3.2 Minimum-Maximum Allowable Relative Humidity Substrate Temp at least 3°C above dewpoint Typical Wet Film Thickness Per Coat

3.3

  :  1000  microns

3.4

3.5

Typical Dry Film Thickness Per Coat

  :  Approx. 950 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :  39.6  m2/L

This is a theoretical figure Only. Coating would never be applied at this film thickness

3.6 Minimum Number of Coats

  : One

3.7

Applicable Substrate

  :   The Substrate will

previously be coated with a primer layer of Corroglass 632 or previously applied Corroglass 602 as per APCS- 28

3.8

Surface Preparation Requirements

 :   Corroglass 602 must be

applied over primer coat of Corroglass 632 or previously applied Corroglass 602 within the overcoating time of the system used.

                                                            ©Saudi Arabian Oil Company, 2021

Page 148 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 602 (Cont’d)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval         To Handle     To Service      Full Cure
               Temperature

Minimum* Maximum **

                      10°C
                      20oC

5 hrs 2 ½ hrs

2 days 2 days

24 hrs 18 hrs

6 days 4 days

6 days
4 days

                      30°C

1 ¾ hrs

1½ days 12 hrs

3 days

3 days

                      40oC

1 hr

1 day

6 hrs 1½ days

1½ days

                      50°C

< 1 hr

6 hrs

6 hrs

1 day

1 day

• There is no minimum overcoating time on the Corroglass 602, this product is solvent free and may be overcoated as soon as the previous coat has gelled and can support the weight of the next coat. All values assume good ventilation.

** Immersion times will depend on the service environment and should be checked with Corrocoat/Hertel OTC for the actual service duty.

3.10 Recommended Application Equipment : Brush, Trowel, or Float

Physical Properties

4.1

Volume Solids (ASTM D2697)

:

99.8%

Corrocoat assesses Volume Solids in accordance with BS-ISO EN 3251:2008 Nominally greater than 99%. This material contains volatile liquid monomers, convertible to solids. In consequence volume solids and WFT/DFT ratios will vary, dependent on polymerization conditions. As guidance, a wet film of 1000microns will normally achieve approximately 950 microns DFT.

4.2

Product Weight (ASTM D1475) Corrocoat assesses Product Weight in accordance with BS 3900: Part A12 1975

1.19 Kg/L

:

Base: 1.19 gcm3 Hardener: 1.07 gcm3

                                                     ©Saudi Arabian Oil Company, 2021

Page 149 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 602 (Cont’d)

4.3

Viscosity (ASTM D562) Corrocoat assesses Viscosity in accordance with BS 2782: Part 7 M730B 1994

:

200,000 – 350,000 Centipoise

4.4

Flash Point (ASTM D93 or D56) Corrocoat assesses Flash Point in accordance with BS 900: Part A9 1986

38°C

:

Flash Point 38 °C

4.5

Approved Color/s

: Standard. Off White

4.6

Finish

: Flat

5. Special Instructions:

Reference item 2.3

Corroglass 602 is adversely affected by the addition of solvents and their use is prohibited.

Reference Item 2.4

Where a less viscous material is required the addition of Corroglass 632 will lower the viscosity without a significant effect on performance

Reference Item 2.6

*At high ambient temperatures pot life can be adjusted by trained applicators in accordance with Corrocoat procedures.

This product is only available on a Supply and Apply Basis from Corrocoat Ltd and their Licensees. In Saudi Arabia, Corrocoat Licensee is Hertel OTC.

                                                            ©Saudi Arabian Oil Company, 2021

Page 150 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28

Type of Coating

: Medium Build Vinyl Ester Glassflake Lining Material

Manufacturer

: Corrocoat

Product Name : Corroglass 632

SAP M/N (SAMS S/N)

:

Storage

Store in accordance with manufacturers recommendations. Shelf life, sheltered storage @ 20°C maximum: 6 months Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life. See ‘Other Information Shelf Life Corrocoat Data Sheet 8/02’

Mixing

2.1

No. of Components

                                         :  2 (Two)

2.2 Mixing Ratio : Base 19.6 liters: Hardener 400

ml

2.3

Thinner See Note in 7 Special Instructions

  :  N/A

Cleaning Agent

SAP M/N (SAMS S/N)

Cleaning Solvent:

: Styrene Monomer Inhibited : 1000709301 (09-000-503-00)

Methyl Ethyl Ketone or Acetone must be used within the pot life of the product for cleaning equipment.

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: N/A

                                                     ©Saudi Arabian Oil Company, 2021

Page 151 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 632 (Cont’d)

2.6

Pot Life : At 20°C - 40 mins Pot Life will vary significantly At 30°C - 30 mins with temperature but generally 40 - 50 minutes at 20°C using P 2 catalyst. See note in Section 7

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : Min 0°C – Max 90°C

Substrate Temp at least 3°C above dewpoint

3.2 Minimum-Maximum Allowable Relative Humidity Substrate Temp at least 3°C above dewpoint

Refer to Corrocoat Technical Services for application at high temperatures : Min 0% – Max 90% RH

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  :  150 - 300

microns

Typical Dry Film Thickness Per Coat

  :  Approx. 125 - 275 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :  39.6  m2/L

This is a theoretical figure Only. Coating would never be applied at this film thickness

3.6 Minimum Number of Coats

  : One

3.7

Applicable Substrate

: Carbon Steel

Stainless Steel/ Stainless Alloys Aluminum Cast Iron/Steel Other Non- Ferrous Alloys Concrete with appropriate primer Corroglass 632 can be applied over primer coat of Corroglass 632 or previously applied Corroglass 602 within the overcoating time of the system used.

                                                            ©Saudi Arabian Oil Company, 2021

Page 152 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 Corroglass 632 (Cont’d)

3.8

Surface Preparation Requirements

:

On metallic substrates

Abrasive Blast Cleaning to a Cleanliness Standard/Equivalent Cleanliness Standard of Sa 2 ½ near Sa 3 with a minimum surface profile of 75 microns using the appropriate approved type of abrasive. Non-ferrous abrasive for non-ferrous substrates.

On concrete substrates

Abrasive Blast Cleaning to remove all surface contaminants, surface laitance and weak frangible material. Followed by priming with appropriate primer in accordance with Corrocoat Procedures detailed in Corrocoat User Data Sheet SP5 Concrete Preparation and Priming

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval     To Handle     To Service      Full Cure
               Temperature

Minimum* Maximum **

                      10°C

5 hrs

2 days

24 hrs

6 days

6 days

                      20oC

2 ½ hrs

2 days

18 hrs

4 days

4 days

                      30°C

1 ¾ hrs

1½ days 12 hrs

3 days

3 days

                      40oC

1 hr

1 day

6 hrs

1½ days 1½ days

                      50°C

< 1 hr

6 hrs

6 hrs

1 day

1 day

• There is no minimum overcoating time on the Corroglass 632, this product is solvent free and may be overcoated as soon as the previous coat has gelled and can support the weight of the next coat. All values assume good ventilation.

** Immersion times will depend on the service environment and should be checked with Corrocoat/Hertel OTC for the actual service duty.

                                                     ©Saudi Arabian Oil Company, 2021

Page 153 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 Corroglass 632 (Cont’d)

3.10 Recommended Application Equipment :

Brush

Physical Properties

4.1

Volume Solids (ASTM D2697)

:

99.8%

Corrocoat assesses Volume Solids in accordance with BS-ISO EN 3251:2008 Nominally greater than 99%. This material contains volatile liquid monomers, convertible to solids. In consequence volume solids and WFT/DFT ratios will vary, dependent on polymerization conditions. As guidance, a wet film of 300microns will normally achieve approximately 275 microns DFT.

4.2

Product Weight (ASTM D1475) Corrocoat assesses Product Weight in accordance with BS 3900: Part A12 1975

1.22 Kg/L

:

Base: 1.22 gcm3

Hardener: 1.07 gcm3

4.3

Viscosity (ASTM D562) Corrocoat assesses Viscosity in accordance with BS 2782: Part 7 M730B 1994

:

45,000 – 65,000 Centipoise

4.4

4.5

4.6

Flash Point (ASTM D93 or D56) Corrocoat assesses Flash Point in accordance with BS 900: Part A9 1986

38 °C

:

Flash Point 38 °C

Approved Color/s

Finish

: Standard. Off White

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 154 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 Corroglass 632 (Cont’d)

Special Instructions:

Reference item 2.3

Corroglass 632 is adversely affected by the addition of solvents and their use is prohibited.

Reference Item 2.6

*At high ambient temperatures pot life can be adjusted by trained applicators in accordance with Corrocoat procedures.

This product is only available on a Supply and Apply Basis from Corrocoat Ltd and their licensees. In Saudi Arabia, Corrocoat Licensee is Hertel OTC.

                                                     ©Saudi Arabian Oil Company, 2021

Page 155 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28

Type of Coating

: Surface Veil Vinyl Ester Glassflake Lining Material

Manufacturer

: Corrocoat

Product Name : Corroglass 652

SAP M/N (SAMS S/N)

:

Storage

1.1

Store in accordance with manufacturers recommendations. Shelf life, sheltered storage @ 20°C maximum : 6 months Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life. See ‘Other Information Shelf Life Corrocoat Data Sheet 8/02’

Mixing

2.1

No. of Components

: 2 (Two)

2.2 Mixing Ratio : Base 19.6 liters : Hardener 400 ml

2.3

Thinner See Note in 7 Special Instructions

: N/A

Cleaning Agent : Styrene Monomer Inhibited

SAP M/N (SAMS S/N) : 1000709301 (09-000-503-00)

Cleaning Solvent

: Methyl Ethyl Ketone or

                                                                                                         Acetone must be used within the
                                                                                                         pot life of the product for
                                                                                                         cleaning equipment.

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time : N/A

                                                            ©Saudi Arabian Oil Company, 2021

Page 156 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 652 (Cont’d)

2.6

Pot Life : At 20°C - 25 – 30 mins Pot Life will vary significantly At 30°C - 15 – 20 mins

                      with temperature but generally
                      25 - 30 minutes at 20°C using P 2

catalyst.

Application

3.1 Minimum-Maximum Allowable Substrate Temperature: Min 0°C – Max 90°C

Substrate Temp at least 3°C above dewpoint

Refer to Corrocoat Technical Services for application at high temperatures

3.2 Minimum-Maximum Allowable Relative Humidity : Min 0% – Max 90% RH

3.3

3.4

3.5

Substrate Temp at least 3°C above dewpoint Typical Wet Film Thickness Per Coat

:  200  microns

Typical Dry Film Thickness Per Coat

:  Approx. 175 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:  39.6 m2/L

This is a theoretical figure Only. Coating would never be

         applied at this film thickness

3.6 Minimum Number of Coats

:  One

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

: The Substrate will previously be coated Corroglass 600 series materials as per APCS 28

: Corroglass 652 is applied over Corroglass 600 series materials within the

overcoating time of the material used.

                                                     ©Saudi Arabian Oil Company, 2021

Page 157 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 652 (Cont’d)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval      To Handle     To Service      Full Cure
               Temperature

Minimum* Maximum **

                      10°C

5 hrs

2 days

24 hrs

6 days

6 days

                      20oC

2 ½ hrs

2 days

18 hrs

4 days

4 days

                      30°C

1 ¾ hrs

1½ days 12 hrs

3 days

3 days

                      40oC

1 hr

1 day

6 hrs

1½ days 1½ days

                      50°C

< 1 hr

6 hrs

6 hrs

1 day

1 day

• There is no minimum overcoating time on the Corroglass 652, this product is solvent free and may be overcoated as soon as the previous coat has gelled and can support the weight of the next coat. All values assume good ventilation.

** Immersion times will depend on the service environment and should be checked with Corrocoat/Hertel OTC for the actual service duty.

3.10 Recommended Application Equipment :

Brush

Physical Properties

4.1

Volume Solids (ASTM D2697)

:

99.8%

Corrocoat assesses Volume Solids in accordance with BS-ISO EN 3251:2008 Nominally greater than 99%. This material contains volatile liquid monomers, convertible to solids. In consequence volume solids and WFT/DFT ratios will vary, dependent on polymerization conditions. As guidance, a wet film of 200microns will normally achieve approximately 175 microns DFT.

4.2

Product Weight (ASTM D1475) Corrocoat assesses Product Weight in accordance with BS 3900: Part A12 1975

  1.18 Kg/L

:

Base: 1.18 gcm3

Hardener: 1.07 gcm3

                                                            ©Saudi Arabian Oil Company, 2021

Page 158 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Corroglass 652 (Cont’d)

4.3

Viscosity (ASTM D562) Corrocoat assesses Viscosity in accordance with BS 2782: Part 7 M730B 1994

:

25,000 – 35,000 Centipoise

4.4

Flash Point (ASTM D93 or D56) Corrocoat assesses Flash Point in accordance with BS 900: Part A9 1986

38 °C

:

Flash Point 38 °C

4.5

Approved Color/s

: Standard. Off White

4.6

Finish

: Semi-Gloss

Special Instructions:

Reference item 2.3

Corroglass 652 is adversely affected by the addition of solvents and their use is prohibited.

Reference Item 2.4

Thinning can be achieved by the addition of up to a maximum, of no more than 1 liter of styrene monomer per 20 liters of Corroglass 652. It should be noted that dilution with styrene may substantially affect chemical resistance of this product.

Reference Item 2.6

*At high ambient temperatures pot life can be adjusted by trained applicators in accordance with Corrocoat procedures.

This product is only available on a Supply and Apply Basis from Corrocoat Ltd and their licensees. In Saudi Arabia, Corrocoat Licensee is Hertel OTC.

                                                     ©Saudi Arabian Oil Company, 2021

Page 159 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28

Type of Coating

: Vinyl Ester Coating: One-coat

Manufacturer

: Corrocoat Ltd.

Product Name : Polyglass VEF

SAP M/N (SAMS S/N)

: Base plus catalyst in one box 1000709300 (09-000-502);

Retarder 1000709303 (09-000-505)

Storage

1.1

Store in accordance with manufacturers recommendations. Shelf life, sheltered storage @ 20°C maximum : 6 months Base and catalyst (Hardener) 6 months, stored at temperatures below 20°C, away from heat sources and out of direct sunlight. Frequent temperature cycling will shorten storage life. See ‘Other Information Shelf Life Corrocoat Data Sheet 8/02’

Mixing

2.1

No. of Components

                           :   3 (Three)

2.2 Mixing Ratio : Base 19.6 liters : Hardener 400 ml :

Retarder 50 ml (see Note in 7 Special Instructions)

2.3

Thinner See Note in 7 Special Instructions

 :  N/A

Cleaning Agent : Styrene Monomer Inhibited

SAP M/N (SAMS S/N) : 1000709301 (09-000-503-00)

Cleaning Solvent

  :  Methyl Ethyl Ketone or

                                                                                                 Acetone must be used within the
                                                                                                 pot life of the product for
                                                                                                 cleaning spray equipment and lines

2.4 Minimum-Maximum Thinning Requirements : N/A

See Note in 7 Special Instructions

2.5

Induction Time : N/A

                                                            ©Saudi Arabian Oil Company, 2021

Page 160 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Polyglass VEF (Cont’d)

2.6

Pot Life : At 20°C w/out Retarder- 50 mins Pot Life will vary significantly At 30°C w/out Retarder- 30 mins

                     with temperature but generally                                     At 20°C with Retarder- 50 mins
                     50 – 60 minutes using P 2.45                                        At 30°C with Retarder- 30 mins

        catalyst. See note in Section 7

3.

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : Min 0°C – Max 90°C

Substrate Temp at least 3°C above dewpoint

Refer to Corrocoat Technical Services for application at high temperatures

3.2 Minimum-Maximum Allowable Relative Humidity Substrate Temp at least 3°C above dewpoint

: Min 0% – Max 90% RH

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  :  800  microns

Typical Dry Film Thickness Per Coat

  :  Approx. 700 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :  39.6  m2/L

This is a theoretical figure Only. Coating would never be

          applied at this film thickness

3.6 Minimum Number of Coats

  : 2 (Two)

3.7

Applicable Substrate

: Carbon Steel

Stainless Steel/ Stainless Alloys Aluminum

Cast Iron/Steel

Other Non- Ferrous Alloys Concrete with appropriate primer

                                                     ©Saudi Arabian Oil Company, 2021

Page 161 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Polyglass VEF (Cont’d)

3.8

Surface Preparation Requirements:

On metallic substrates

Abrasive Blast Cleaning to a Cleanliness Standard/Equivalent Cleanliness Standard of Sa 2 ½ near Sa 3 with a minimum surface profile of 50 microns using the appropriate approved type of abrasive. Non-ferrous abrasive for non-ferrous substrates.

On concrete substrates

Abrasive Blast Cleaning to remove all surface contaminants, surface laitance and weak frangible material. Followed by priming with appropriate primer in accordance with Corrocoat Procedures detailed in Corrocoat User Data Sheet SP5 Concrete Preparation and Priming.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval     To Handle     To Service      Full Cure
               Temperature

Minimum* Maximum **

                      10°C

5 hrs

3 days

24 hrs 6 days

6 days

                      20oC

2 ½ hrs

2 days

18 hrs 4 days

4 days

                      30°C

1 ¾ hrs

1½ days 12 hrs 3 days

3 days

                      40oC

1 hr

1 day

6 hrs 1½ days

1½ days

                      50°C

< 1 hr

6 hrs

6 hrs 1 day

1 day

• There is no minimum overcoating time on the Polyglass VEF, this product is solvent free and may be overcoated as soon as the previous coat has gelled and can support the weight of the next coat. In practice this is generally for tank coating the time period before you can walk on the coating to apply the next coat. All values assume good ventilation.

**Immersion times will depend on the service environment and should be checked with Corrocoat/Hertel OTC for the actual service duty. For reference purposes we have assumed a medium service duty oil process vessel.

                                                            ©Saudi Arabian Oil Company, 2021

Page 162 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Polyglass VEF (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Pump ratio 45:1 minimum Spray Tip Size 0.031 to 0.035 inch Fluid pressure : 3000 psi Spray Hose : 3/8 inch bore

Conventional Spray

: Not Recommended

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids (ASTM D2697)

: 99%

Corrocoat assesses Volume Solids in accordance with BS-ISO EN 3251:2008 Nominally greater than 99%. This material contains volatile liquid monomers, convertible to solids. In consequence volume solids and WFT/DFT ratios will vary, dependent on polymerization conditions. As guidance, a wet film of 500microns will normally achieve approximately 425microns DFT.

4.2

Product Weight (ASTM D1475) Corrocoat assesses Product Weight in accordance with BS 3900: Part A12 1975

1.19 Kg/L

:

Base: 1.19 gcm3 Hardener: 1.07 gcm3

4.3

Viscosity (ASTM D562) Corrocoat assesses Viscosity in accordance with BS 2782: Part 7 M730B 1994

:

25,000 – 40,000 Centipoise

4.4

Flash Point (ASTM D93 or D56) Corrocoat assesses Flash Point in accordance with BS 900: Part A9 1986

28°C

:

Flash Point: 28 °C

                                                     ©Saudi Arabian Oil Company, 2021

Page 163 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-28 - Polyglass VEF (Cont’d)

4.5

Approved Color/s Other colors are available on request but the addition of dyes adversely affects chemical resistance and air inhibition suppressant is required for color stability.

: Standard. Off White.

4.6

Finish

: Semi-Gloss

5. Special Instructions:

Reference item 2.3

Polyglass VEF is adversely affected by the addition of solvents and their use is prohibited.

Reference Item 2.4

Thinning can be achieved by the addition of no more than 1 liter of styrene monomer per 20 liters of Polyglass. It should be noted that dilution with styrene may affect hold up and chemical resistance.

Reference Item 2.6

*At high ambient temperatures retarder may be used to extend pot life but should be added to the base and thoroughly mixed before addition of the hardener in accordance with the manufacturers procedures.

                                                            ©Saudi Arabian Oil Company, 2021

Page 164 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

g. Daikin – Approved Products

APCS-5A

Zeffle IR Coating*

*Note: Refer to coating manufacturer’s Product Data Sheets for the above product.

                                                     ©Saudi Arabian Oil Company, 2021

Page 165 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

h. Durapol – Approved Products

                   APCS-27

Durapol UHT (Spray Grade) / Durapol UHT (Brush Grade)

Epoxy

                                                            ©Saudi Arabian Oil Company, 2021

Page 166 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-27

Solvent Free Ultra Hybrid Epoxy

DuraPol Limited

DuraPol UHT (Spray Grade) / DuraPol UHT (Brush Grade)

DuraPol UHT (Spray) Grade - 1000767601 (09-000-519) DuraPol UHT (Brush Grade) - 1000767602 (09-000-520)

Type of Coating

Manufacturer

Product Name

:

:

:

SAP M/N (SAMS S/N):

1. Storage

1.1

Shelf Life, sheltered storage @ 35oC maximum : 3 years

2 Mixing

2.1

2.2

2.3

2.4

2.5

2.6

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

: 2 : UHT Base : UHT Hardener

Mixing Ratio

Thinner

: 310: 23 (Base: Hardener)

: Not Applicable

Minimum-Maximum Thinning Requirements

: Not Applicable

Induction time

Pot Life

: 0

: 75 minutes

3 Application

3.1

Minimum-Maximum Allowable Substrate Temperature: 20oC Min., 60oC Max.

3.2

3.3

3.4

Minimum-Maximum Allowable Relative Humidity : 0% Min., 90% Max.

Typical Wet Film Thickness Per Coat

       : 800 microns

Typical Dry Film Thickness Per Coat

       : 800 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 167 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer – Approved Saudi Aramco Data Sheet

APCS-27 - DuraPol UHT (Cont’d)

3.5

3.6

3.7

Theoretical Coverage @ 25 microns DFT

: 23 m2 / L

Minimum Number of Coats

: 1

Applicable Substrate

: CS, GS, SS, Al,

                                                                                             Thermal Spray, Hastalloy,

                                                                                                          Super Duplex

3.8

Surface Preparation Requirements

: Sa3 Cleanliness

                         : Profile: 75 – 100 microns

3.9 Drying time at specified DFT

Substrate             Recoat Interval          To Handle           To Service            Full Cure

Temperature

  10oC                          Not applicable     -------------    Not Recommended     ---------------

               20oC                         Not applicable           160 minutes             4 days                   4 days

               30oC                         Not applicable           120 minutes             3 days                   3 days

               40oC                         Not applicable

      90 minutes             2 days                   3 days

                50oC                         Not applicable            60 minutes             2 days                   3 days

         * Cure for rapid return to service: 24 hours at +20oC folllowed by 12 hours using hot
             air between 60oC to 90oC. This is requirement for concentrated acid service.

  3.10           Recommended Application Equipment

          Airless Spray:

63:1 ratio or greater pump. All internal filters in pump and gun removed. Use a 23 thou reversible fluid tip i.e. 623.

                                                                          Use new spray hoses.

                       Conventional Spray:

Not Applicable

                        Brush:

For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 168 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer – Approved Saudi Aramco Data Sheet

APCS-27 - DuraPol UHT (Cont’d

4 Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids (ASTM D2697)

: 100%

Product Weight (ASTM D1475)

: 1.9 KG/L

Viscosity (ASTM D562)

: 25,000 cPoise

Flash Point (ASTM D93 or D56)

: >120oC

Approved Colors

: Dark Brown, Black

Finish

: Semi-Gloss

Special Instructions

 5.1

Store at 30oC approximately 24 hours prior to using

Mix Base and Hardener using an electric power mixer with helical paddle the diameter of which is approximately 1/3 diameter of the product tin.

                      Never mix part kits

                      Do not apply repair onto first coat without first sweep blasting. Avoid at all cost repair

overlap onto coating not sweep blasted.

                      Always degrease the metallic surface using an approved alkaline water based degreaser

before power washing with fresh water and then grit blasting.

                      Always apply coating to final full thickness before moving to a new section.  Never

apply fresh coating onto overspray or coating that has been applied +10 minutes earlier even if it looks wet.

.

                                                     ©Saudi Arabian Oil Company, 2021

Page 169 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

i.

Envirotrol – Approved Products

                   APCS-5B

Ceramic Cover CC-100*

*Note: Refer to coating manufacturer’s Product Data Sheets for the above product.

                                                            ©Saudi Arabian Oil Company, 2021

Page 170 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

j.

Fosam – Approved Products

                  APCS-10

Nitoproof 120

Bituminous Coating

                                                     ©Saudi Arabian Oil Company, 2021

Page 171 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer-Approved Saudi Aramco Data Sheet

APCS-10

Type of Coating

: Bituminous Coating: Self-Priming

Manufacturer

: Fosam Co.

Product Name

: Nitoproof 120

SAP M/N (SAMS S/N)

:

1000194025 (09-611-715), 1000194029 (09-611-720) or 1000194032 (09-611-725)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1-½ years

Mixing

2.1

No. of Components

2.2 Mixing Ratio

2.3

Thinner

SAMS S/N

2.4

Thinning

2.5

2.6

Induction Time

Pot Life

Application

: One

: N/A

: Solvent 102

: None

: Maximum 5% by volume when required

: N/A

: N/A

3.1 Maximum Allowable Substrate Temperature

3.2

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers

:

:

:

:

°C

500 micrometers

325 micrometers

13 m²/l

3.5 Minimum Number of Coats (Spray Application)

: Three for buried.

Four for immersion.

                                                            ©Saudi Arabian Oil Company, 2021

Page 172 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer-Approved Saudi Aramco Data Sheet

APCS-10 - Nitoproof 120 (Cont’d)

3.6

Drying Time

Substrate Temperature

To Handle Minimum Maximum Water*

Buried*

Recoat Interval To Immersion

10°C

30°C

50°C

8 to 16 Hours

12 Hours

None 7 Days 7 Days

2 to 4 Hours

4 Hours

None 7 Days 7 Days

30 Minutes

2 Hours

None 4 Days 4 Days

• After full cure

3.7

Recommended Equipment

Airless Spray

Conventional Spray

Brush

: Tip Size: 0.026 inch

Fluid Pressure: 2,030 psi

: Not recommended

: Touch-up/repair

Technical Properties

4.1

4.2

4.3

4.4

Volume Solids (ASTM D2697)

Product Weight (ASTM D1475)

Viscosity (ASTM D562)

Flash Point (ASTM D93 or D56)

:

:

65%

1.17 kg/l

: KU

:

37°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 173 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

k. Hempel – Approved Products

                 APCS-1A

Galvosil 15780 Hempadur Mastic 45880/45881

Inorganic Zinc Primer, Solvent-Based Epoxy Topcoat

                 APCS-1B

Hempadur HB Primer 17300 or Hempadur 15570 Use Epoxy Topcoat of APCS-1A as topcoat

                Epoxy Primer, with Zinc Phosphate

Epoxy Primer, with MIO

                 APCS-1C

Hempadur Zinc 17360 Use Epoxy Topcoat of APCS-1A as topcoat

                Zinc-Rich Epoxy Primer

                 APCS-1D

Use APCS-1A as primer and intermediate coat Hempathane Topcoat 55210

                Polyurethane Topcoat

                 APCS-1E

Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

                 APCS-1F

Use APCS-1C as primer and intermediate coat. Use Polyurethane Topcoat of APCS-1D as topcoat

                  APCS-2A/B/C

Hempadur 85671

                Phenolic Epoxy

                  APCS-2D

Hempadur 85210

                Epoxy Primer and Topcoat

                  APCS-2G

Hempel’s Vinyl Ester GF 35910

Vinyl Ester, with Glass Flakes

                  APCS-4

Hempel’s ZP Alkyd Primer 12090 Hempel’s Silvium 51570

          Zinc Phosphate Alkyd Primer
          Aluminum Topcoat

                  APCS-6

Use Alkyd Primer of APCS-4 Hempalin 52140

          Alkyd Topcoat

                                                            ©Saudi Arabian Oil Company, 2021

Page 174 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

         Hempel - Approved Products (Cont'd)

                 APCS-9

Hempatex 46330

               Chlorinated Rubber, Self-Priming

                 APCS-10

Hempinol HB 10270

               Bituminous Coating

                 APCS-11A

Use primer of APCS-1A Hempel’s Silicone Aluminum 56910 or Heat Resistant Aluminum Topcoat Hempel’s Silicone Acrylic 56940

                 APCS-11B

Hempel’s Silicone Aluminum 56910

Heat Resistant Coating, Self-Priming

                 APCS-11C

Versiline CUI 56990

Inorganic Copolymer Coating

                 APCS-12

Use primer and topcoat of APCS-1B

                 APCS-17A

Use primer of APCS-1A

                 APCS-19C

Hempadur Multi-Strength GF 35870

Glass Flake Reinforced Polyester/ Epoxy

                 APCS-20A

Hempel’s Epoxy Resin System 05500

                 APCS-20B

Hempel’s Sprayfiber 35890

Fiberglass Reinforced Epoxy, Hand Lay-Up

Fiberglass Reinforced Epoxy, Hand Spray-Applied

                 APCS-22A

Hempadur 45070

Epoxy

                  APCS-26

Hempadur Mastic 45880/45881

Epoxy Mastic

                  APCS-26T

Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

                  APCS-113A

Hempadur 87540

                                                     ©Saudi Arabian Oil Company, 2021

Page 175 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A

Type of Coating

:

Inorganic Zinc Primer, Solvent-Based

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s Galvosil 15780

SAP M/N (SAMS S/N)

:

1000194146 (09-611-958)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

6 months

Mixing

2.1

No. of Components 2.1.1 Base : 15789 Liquid 2.1.2 Hardener (Curing Agent) :

                                          :

2

97170 / 97140 Zinc Dust

2.2 Mixing Ratio (Base: Curing Agent)

: 10 L liquid: 17 Kg Zinc Dust

2.3

Thinner

: Hempel’s 08700

SAP M/N (SAMS S/N)

:

1000198445 (09-738-220)

2.4 Minimum-Maximum Thinning Requirements :

up to 50% by Volume

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

9 hours @ 25ºC 3 hours @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10-40°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

50-75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

100 microns

65 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 176 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Hempel’s Galvosil 15780 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers : 26.4 m2/L Dry Film Thickness

3.6 Minimum Number of Coats : 1

3.7

Applicable Substrate

: Carbon steel

3.8

Surface Preparation Requirements:

Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting with sharp abrasive to minimum Sa 2½ (ISO8501-1:2007) with a surface profile equivalent to Rugotest No. 3, BN10, Keane-Tator Comparator, min.3.0 G/S, or ISO Comparator rough Medium (G). In case of new steel to be exposed to no more than medium aggressive (industrial) environment and without any extraordinary demands to lifetime, a surface preparation degree of SSPC-SP6 may suffice.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval            To Handle     To Service      Full Cure
               Temperature

Minimum Maximum

                      10°C

4 days

None 4 hours

                      30°C

1 day

None

   1 hour

                      50°C

6 hours

None

    ¼ hour

• Before overcoating after exposure in a contaminated environment, clean thoroughly

by high pressure sweet water hosing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush

: Tip size: 0.019 to 0.023 inch Fluid pressure: 1,500 psi

: Tip size: 0.070 to 0.085 inch Atomizing pressure: 20 to 35 psi

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 177 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Hempel’s Galvosil 15780 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

64 to 68%

2.37 to 2.43Kg/L

67 to 73 KU

14°C

4.5

Approved Color/s: 19840 Metal Gray

4.6

Finish:

Flat

Special Instructions:

Topcoating is done when the inorganic zinc primer is fully cured. The minimum overcoating time is valid @75% relative humidity and sufficient ventilation.

                                                            ©Saudi Arabian Oil Company, 2021

Page 178 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E//1F

Type of Coating

: Epoxy Primer, Intermediate or Topcoat, Polyamide-Cured

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name

: Hempadur Mastic 45880 (Winter Version) Hempadur Mastic 45881 (Summer Version)

SAP M/N (SAMS S/N)

1000194629 (09-612-364), 1000194797 (09-612-369)

: Or 1000194960 (09-612-375)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) : 95880 (Winter) /

2 45889

                                                              95881(Summer)

2.2 Mixing Ratio (Base : Curing Agent)

: 3:1 by Volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N)

:

1000198572 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements :

up to 5-10%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

: 2¼ hours @ 25ºC ¾ hours @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Min. N/A - Max. 85%

                                                     ©Saudi Arabian Oil Company, 2021

Page 179 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E//1F - Hempadur Mastic 45880/45881 (Cont’d)

         3.3

Typical Wet Film Thickness Per Coat

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

125-138 microns

100-110 microns

30.8 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval             To Handle     To Service      Full Cure
               Temperature

Minimum Maximum

                      20oC

7 hours

Extended 10 hours

                      30°C

6 hours

Extended 8 hours

                      40oC

4 hours Extended 6 hours

                      50°C

2 hours

Extended 4 hours

7 days

5 days

• Before overcoating after exposure in a contaminated environment, clean thoroughly by high pressure sweet water hosing and allow to dry. If maximum overcoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion.

3.8

Recommended Application Equipment:

Airless (A/L) Spray

: Tip size: 0.017 to 0.023 inch Fluid pressure: 3,600 psi

                       Conventional Spray

: No

                       Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 180 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E//1F - Hempadur Mastic 45880/45881 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

80+/-1%

1.37 to 1.43 Kg/L

105 to 115 KU

35°C

4.5

Approved Color/s: 50630 / Red, 13600/ Grey, 20300/Yellow

Other shades available subject for confirmation and requirement related to final coat

4.6

Finish:

Semi-Gloss

                                                     ©Saudi Arabian Oil Company, 2021

Page 181 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E

Type of Coating

: Epoxy Primer, with Zinc Phosphate

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur HB Primer 17300

SAP M/N (SAMS S/N)

:

1000194626 (09-612-362)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 17309 95010

2.2 Mixing Ratio (Base : Curing Agent) :

5:1 by volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N)

:

1000198445 (09-738-280)

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

3 hours @ 25ºC 1 hours @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

20-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

135 microns

75 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 182 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E - Hempadur HB Primer 17300 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

22.4 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

:

Steel and other metal

3.8

Surface Preparation Requirements:

New steel: Abrasive blasting to Sa 2½. For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use HEMPADUR HB PRIMER 17300.

Other metals and light alloys: Thorough degreasing and removal of any salty contamination. Abrasive sweeping to create a suitable dense anchor profile.

Repair and maintenance: Remove oil and grease, etc. with suitable detergent. Remove salt and other contaminants by (high pressure) fresh water cleaning. Clean damaged areas thoroughly by power tool cleaning to St 3 (minor areas) or by abrasive blasting to min. Sa 2, preferably to Sa 2½. Improved surface preparation will improve the performance of HEMPADUR HB PRIMER 17300.Feather edges to sound intact areas. Dust off residues. Touch up to full film thickness. On pit-corroded surfaces, excessive amounts of salt residues may call for high pressure water jetting, wet abrasive blasting, alternatively dry abrasive blasting, high pressure fresh water hosing, drying, and finally, dry abrasive blasting again.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

10 days

60 days

    6 hours

                      30°C

2½ hours

18 days

    1½ hours

                      50°C

1 hour

7 days

    1 hour

                                                     ©Saudi Arabian Oil Company, 2021

Page 183 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E - Hempadur HB Primer 17300 (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

                       Conventional Spray

: Tip size: 0.021 inch

: Tip Size: 0.021 inch

                       Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

54 to 58%

1.47 to 1.53 Kg/L

75 to 80 KU

26ºC

4.5

Approved Color/s: 21780 Yellow

4.6

Finish:

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 184 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E

Type of Coating

: Epoxy Primer, with Micaceous Iron Oxide (MIO)

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur 15570

SAP M/N (SAMS S/N)

:

1000194626

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 15579 95570

2.2 Mixing Ratio (Base: Curing Agent) :

3:1 by volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N)

:

1000198445

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

1½ hours @ 25ºC : ½ hours @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

20-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 85%

3.3

Typical Wet Film Thickness Per Coat

  :

140 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 185 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E - Hempadur 15570 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat : 75 microns

Theoretical Coverage @ 25 Micrometers : 21.6 m2/L Dry Film Thickness

3.6 Minimum Number of Coats

:

1

3.7

Applicable Substrate

: Steel, stainless steel and other

metal

3.8

Surface Preparation Requirements:

New steel: Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPADUR 15570.

Other metals and light alloys: Thorough degreasing and (light) abrasive sweeping to remove contamination and to secure adhesion - surface profile depending on later exposure.

Stainless steel: (e.g. ballast tanks of chemical carriers) to be abrasive blast cleaned to a uniform, sharp, dense profile (Rugotest No. 3, BN9a, ISO Comparator Medium (G), Keane-Tator Comparator 2.0 G/S) corresponding to Rz minimum 50 micron. Any salts, grease, oil, etc. to be removed before abrasive blasting is commenced.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

8 hours

None

    16 hours

                      30°C

3 hours

None

    4 hours

                      50°C

1 hour

None

    1 hour

                                                            ©Saudi Arabian Oil Company, 2021

Page 186 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E - Hempadur 15570 (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray Fluid pressure

Conventional Spray

Brush

Physical Properties

: Tip size: 0.019 to 0.021 inch :

2,500 psi

: N/A

: For stripe coating / touch-up only

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

52 to 56%

1.37 to 1.43 Kg/L

90 to 94 KU

25ºC

4.5

Approved Color/s: 12430 (MIO) Reddish Grey

4.6

Finish:

Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 187 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F

Type of Coating

: Zinc Rich Epoxy Primer

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur Zinc 17360

SAP M/N (SAMS S/N)

:

1000195348 (09-612-580) or 1000195361 (09-612-590)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 17369 97040

2.2 Mixing Ratio (Base : Curing Agent)

: 4:1 by Volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N)

:

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

1½ hours @ 25ºC

: ½ hour @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 to 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

80 microns

50 microns

26 m2/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 188 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F - Zinc Rich Epoxy Primer 17360 (Cont’d)

3.6 Minimum Number of Coats

:

1

3.7

Applicable Substrate

: Carbon Steel

3.8

Surface Preparation Requirements:

Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:2007) with a sharp-edged surface profile corresponding to Rugotest No. 3, BN9a, Keane-Tator Comparator, 2.0 G/S, 2 S, or ISO Comparator, Medium (G).

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

4 hours

None 5 hours

                      30°C

1 hour

None

   1 hour

                      50°C

½ hour

None

    ½ hour

• Before overcoating after exposure in a contaminated environment, clean thoroughly

by high pressure sweet water hosing and allow to dry.

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush

: Tip size: 0.017 to 0.021 inch Fluid pressure: 2,200 psi

:

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

63 to 67%

2.67 to 2.73 Kg/L

69 to 101 KU

                                                     ©Saudi Arabian Oil Company, 2021

Page 189 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F - Zinc Rich Epoxy Primer 17360 (Cont’d)

4.4

Flash Point

(ASTM D93 or D56)

:

24°C

4.5

Approved Color/s: 19840 / Metal Gray

4.6

Finish:

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 190 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T TOPCOAT

Type of Coating

: Polyurethane Topcoat, Aliphatic

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempathane Topcoat 55210

SAP M/N (SAMS S/N)

:

1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 55219 95370

2.2 Mixing Ratio (Base : Curing Agent)

: 7:1 by Volume

2.3

Thinner

: Hempel’s 08080

SAP M/N (SAMS S/N)

:

1000198479 (09-738-345)

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

3 hours @ 25ºC 1 hour @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

50-75%

3.3

Typical Wet Film Thickness Per Coat

  :

95 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 191 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T TOPCOAT - Hempathane Topcoat 55210 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

50 microns

20.8 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

12 hours

None 24 hours

                      20oC

 6 hours         None

   12 hours

7 days

                      30°C

 3 hours

None

     6 hours

      3.5 days

                      40oC

1.5 hours

None

     4 hours

                      50°C

45 minutes None

     2 hours

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.017 to 0.019 inch Fluid pressure: 2,200 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

:

:

:

51%

1.17 to 1.23 Kg/L

65 to 70 KU

                                                            ©Saudi Arabian Oil Company, 2021

Page 192 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T TOPCOAT - Hempathane Topcoat 55210 (Cont’d)

4.4

Flash Point (ASTM D93 or D56): 33°C

4.5

Approved Color/s:

       50630 / Red, 13600/ Grey, 20300/Yellow, 47050/Green,
       10000/White
        Other shades available subject for confirmation and
        requirement related to final coat

4.6

Finish:

        Glossy

5.

Special Instructions:

For APCS-1D, use APCS-1A as primer and intermediate coat. For APCS-1E use APCS-1B as primer and intermediate coat. For APCS-1F, use APCS-1C as primer and intermediate coat. For APCS-26T, use APCS-26 as primer.

The film formation may be adversely affected by light rain, high humidity and/or condensation during application and the following interval after application: 8 hours, 20°C/68°F

                                                     ©Saudi Arabian Oil Company, 2021

Page 193 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

                                                            ©Saudi Arabian Oil Company, 2021

Page 194 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C

Type of Coating

: Phenolic Epoxy: Amine Adduct Cured

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur 85671

SAP M/N (SAMS S/N) 1000195232 (09-612-425) or 1000195235 (09-612-453) for APCS-2A; 1000195317 (09-612-518) or 1000195341 (09-612-546) for APCS-2B; And 1000194295 (09-612-312), 1000194298 (09-612-313) or

:

   1000194352 (09-612-314) for APCS-2C

1.

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

                                          :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 85675 97371

2.2 Mixing Ratio (Base : Curing Agent)

: 8.8 : 1.2 by volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N): 1000198377 (09-738-140) for APCS-2A, 1000198372 (09-738-100) for APCS-2B, and 1000198483 (09-738- 380) for APCS-2C

2.4 Minimum-Maximum Thinning Requirements :

up to 10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

:

15 mins. @ 20ºC

2¼ hours @ 25ºC

: ¾ hour @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

                                                     ©Saudi Arabian Oil Company, 2021

Page 195 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Hempadur 85671 (Cont’d)

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  :     150 microns

Typical Dry Film Thickness Per Coat

  :     100 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :     27.2 m2/L

3.6 Minimum Number of Coats

   :    3

3.7

Applicable Substrate

   :    Carbon Steel, Concrete

3.8

Surface Preparation Requirements

:

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ (ISO8501-1:2007) with a surface profile corresponding to Rugotest No. 3, BN10a, Keane-Tator Comparator3.0 G/S, or ISO Comparator Rough Medium (G). Apply immediately after cleaning. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to over coating.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Old steel surfaces having been exposed to salt water, excessive amounts of salt residues in pitting may call for abrasive blasting, high pressure fresh water hosing, drying, and finally, dry abrasive blasting again.

Concrete: Remove slip agent and other possible contaminants by emulsion washing followed by high pressure hosing with fresh water. Remove scum layer and loose matter to a hard, rough and uniform surface, preferably by abrasive blasting, possibly by other mechanical treatment or acid etching. Seal surface with suitable sealer, as per relevant painting specification.

                                                            ©Saudi Arabian Oil Company, 2021

Page 196 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Hempadur 85671 (Cont’d)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

1.5 days

50 days 25 hours 18 days

                      20oC

1 day

21 days

7 days

                      30°C

12 hours

10 days

       5 hours

3.5 days

                      40oC

 8 hours

7 days

3 days

                      50°C

3 hours

3 days

      1 hour

2 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.018 to 0.021 inch Fluid pressure: 2,900 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

66 to 70%

1.67 to 1.73Kg/L

88 to 95 KU

24°C

4.5

Approved Color/s: 42070 / Light Green, 50900/Light Red, 11150/Light Grey

4.6

Finish:

Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 197 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B

Type of Coating

: Phenolic Epoxy: Amine Adduct Cured

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur 85671

SAP M/N (SAMS S/N) 1000195232 (09-612-425) or 1000195235 (09-612-453) for APCS-2A; 1000195317 (09-612-518) or 1000195341 (09-612-546) for APCS-2B; and 1000194295 (09-612-312), 1000194298 (09-612-313) or

:

   1000194352 (09-612-314) for APCS-2C

1.

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base : 85675 97371 2.1.2 Hardener (Curing Agent) :

                                          :

2

2.2 Mixing Ratio (Base: Curing Agent)

: 8.8 : 1.2 by volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N): 1000198377 (09-738-140) for APCS-2A, 1000198372 (09-738-100) for APCS-2B, and 1000198483 (09-738- 380) for APCS-2C

2.4 Minimum-Maximum Thinning Requirements :

up to 10% by Volume

2.5

Induction Time

2.6

Pot Life

:

15 mins. @ 20ºC

2¼ hours @ 25ºC

: ¾ hour @ 40ºC

                                                            ©Saudi Arabian Oil Company, 2021

Page 198 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B Hempadur 85671 (Cont’d)

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: Max. 75%

3.3

Typical Wet Film Thickness Per Coat

  :    150 microns

3.4

3.5

Typical Dry Film Thickness Per Coat

  :    100 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :     27.2 m2/L

3.6 Minimum Number of Coats

  :     3

3.7

Applicable Substrate

   :    Carbon steel, Concrete

3.8

Surface Preparation Requirements:

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ (ISO8501-1:2007) with a surface profile corresponding to Rugotest No. 3, BN10a, Keane-Tator Comparator3.0 G/S, or ISO Comparator Rough Medium (G). Apply immediately after cleaning. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to over coating.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Old steel surfaces having been exposed to salt water, excessive amounts of salt residues in pitting may call for abrasive blasting, high pressure fresh water hosing, drying, and finally, dry abrasive blasting again.

Concrete: Remove slip agent and other possible contaminants by emulsion washing followed by high pressure hosing with fresh water. Remove scum layer and loose matter to a hard, rough and uniform surface, preferably by abrasive blasting, possibly by other mechanical treatment or acid etching. Seal surface with suitable sealer, as per relevant painting specification.

                                                     ©Saudi Arabian Oil Company, 2021

Page 199 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B - Hempadur 85671 (Cont’d)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

90 hours

45 days 25 hours 18 days

                      20oC

36 hours

21 days

10 days

                      30°C

18 hours

14 days

       5 hours          7 days

                      40oC

10 hours

8 days 4 days

                      50°C

5 hours

3 days

      2 hours           2 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.018 to 0.021 inch Fluid pressure: 2,900 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

66 to 70%

1.67 to 1.73Kg/L

88 to 95 KU

24°C

4.5

Approved Color/s: 42070 / Light Green, 50900/Light Red, 11150/Light

Grey, 11630 / Off-white

4.6

Finish:

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 200 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D

Type of Coating

: Epoxy, Amine Adduct Cured, Primer/Topcoat

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur 85210

SAP M/N (SAMS S/N)

:

1000194354 (09-612-316) or 1000194357 (09-612-317)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 85219 89110

2.2 Mixing Ratio (Base : Curing Agent) : 4 : 1 by volume

2.3

Thinner

: Hempel’s 08450

                                  SAP M/N (SAMS S/N)   :     1000198458 (09-738-290)

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

1½ hours @ 25ºC

: ½ hour @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

15-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

Typical Wet Film Thickness Per Coat

  :

150 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 201 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Hempadur 85210 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

100 microns

26.4 m2/L

3.6 Minimum Number of Coats

:

2

3.7

Applicable Substrate

:

Carbon Steel

3.8

Surface Preparation Requirements:

Abrasive blasting to near white metal Sa 2 ½ with a surface profile corresponding to Rugotest No. 3, BN10, Keane-Tator Comparator, 3.0 G/S, or ISO Comparator, Rough Medium (G).

3.9

Drying Time:

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

30 hours

8 days 30 hours 18 days

                      20oC

12 hours

3 days

 11 days           10 days

                      30°C

  6 hours

36 hours

       5 hours          5 days

                      40oC

  4 hours

18 hours 3 days

                      50°C

  2 hours

10 hours

        1 hour

   2 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.021 inch

Fluid pressure: 2,175 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 202 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Hempadur 85210 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

64 to 68%

1.37 to 1.43 Kg/L

70 to 75 KU

35°C

4.5

Approved Color/s: 21240/Yellow, 11630/ Off White

4.6

Finish:

Semi-Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 203 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G

Type of Coating

: Vinyl Ester, with Glass Flakes

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name

: Hempel’s Vinyl Ester GF 35910

SAP M/N (SAMS S/N)

:

1000709300; 1000709303; 1000709301

Storage

1.1

Shelf life, sheltered storage @ 20°C maximum

:

6 months

Mixing

2.1

No. of Components

2.2 Mixing Ratio (By Volume)

2.3

Thinner

SAP M/N (SAMS S/N)

2.4

Thinning Requirements

2.5

2.6

Induction Time

Pot Life

Application

:

:

2

98: 2

: N/A

:

: None or maximum 5% Hempel’s Cleaner 99910

Cleaning of tools Hempel’s Thinner 08960

: Nil

:

45 mins @ 25°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 50°C

3.2 Minimum-Maximum Allowable Relative Humidity :

Max. 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

        :

725 micrometers

Typical Dry Film Thickness Per Coat

        :

600 micrometers

                                                            ©Saudi Arabian Oil Company, 2021

Page 204 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Hempel’s Vinyl Ester GF 35910 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

        :

40 m²/L

3.6 Minimum Number of Coats

        :

1

3.7

Applicable Substrate

:

Carbon Steel

3.8

Surface Preparation:

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high-pressure fresh water cleaning. Minimum surface profile corresponding to Rugotest No. 3, BN11a, Keane-Tator Comparator, 5.5 G/S, or ISO Comparator Coarse (G) - or as per specification for the subsequent coat(s). After blasting, clean the surface carefully from abrasives and dust.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. On pit-corroded surfaces, excessive amounts of salt residues may call for high pressure water jetting, wet abrasive blasting or, alternatively, dry abrasive blasting, high pressure fresh water hosting, drying, and finally dry abrasive blasting again.

Galvanized, Zinc primed steel etc.: Metallic zinc inhibits the curing process - the product is not compatible with galvanized steel or other zinc coated substrates. Steel primed with zinc dust containing pre-fabrication primers must be re-blasted to min. Sa 2½-3 to remove all traces of zinc.

3.9

Drying Time

Substrate Temperature

    Recoat Interval                    To Handle

Maximum Minimum

10°C

20°C

30°C

12 Hours

3 Days

  11 hrs

5 Hours

4 Hours

2 Days

1 Day

    6 hrs

    3 hrs

                                                     ©Saudi Arabian Oil Company, 2021

Page 205 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Hempel’s Vinyl Ester GF 35910 (Cont’d)

3.10 Recommended Application Equipment

Airless Spray

: Tip size 0.030 to 0.060 inch

(Reversible Tip) Fluid pressure 4,050 psi

Conventional Spray

: N/A

Trowel/Brush

: For touch-up only.

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

1.2 to 1.3 Kg/L

105 to 115 KU

28°C (82°F)

4.5

Approved Color/s

: 11630/ Off white

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 206 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6

Type of Coating

: Zinc Phosphate Alkyd Primer

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s ZP Alkyd Primer 12090

SAP M/N (SAMS S/N)

:

1000197976 (09-708-133) or 1000198011 (09-708-137)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s 08230

SAP M/N (SAMS S/N)

:

1000198474 (09-738-340)

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

98 microns

50 microns

19.6 m2/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 207 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Hempel’s ZP Alkyd Primer 12090 (Cont’d)

3.6 Minimum Number of Coats

3.7

Applicable Substrate

:

2

: Steel

3.8

Surface Preparation Requirements:

New steel: Abrasive blasting to Sa 2 (ISO 8501-1:1988) is recommended. For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPEL’S ZP ALKYD PRIMER 12090.

Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. Touch up bare spots to full film thickness.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

18 hours

15 days 12 hours

                      30°C

5 hours

2 days

     5 hours

                      50°C

1.5 hours

1 day

     2 hours

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.018 inch

Fluid pressure: 2,200 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 208 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Hempel’s ZP Alkyd Primer 12090 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

48 to 51%

1.25 to 1.30Kg/L

75 to 80 KU

38°C

4.5

Approved Color/s

: 2020S/ Yellow

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 209 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4

Type of Coating

: Aluminum Topcoat

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s Silvium 51570

SAP M/N (SAMS S/N)

:

1000196402 (09-686-354)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: N/A

: N/A`

: N/A

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

below 120- 200°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

98 microns

50 microns

19.6 m2/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 210 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat - Hempel’s Silvium 51570 (Cont’d)

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

18 hours

None 1.5 days

                      20oC

11 hours

                      30°C

5 hours

None

     8 hours

                      40oC

3 hours

                      50°C

2 hours

None

     3 hours

3.8

Recommended Application Equipment

Airless (A/L) Spray: Tip size: 0.017 inch, Fluid pressure: 1,500 psi

Conventional Spray: No

Brush: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5 4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

36 to 40%

0.97 to 1.03 Kg/L

51 to 57 KU

38°C

Approved Color/s Finish

: 19000/ Aluminum : Glossy

                                                     ©Saudi Arabian Oil Company, 2021

Page 211 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6

Type of Coating

: Alkyd Enamel Topcoat, Glossy

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempalin Enamel 52140

SAP M/N (SAMS S/N)

: 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495 (09-630-763), 1000195532 909-630-768), 1000195571 (09-630-769), 1000195577 (09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-773), 1000195650 (09-630-785), 1000195683 (09-630-794) 1000195685 (09-630-796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-631-322), 1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749 (09-631-462), 1000195801 (09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s thinner 08230`

SAP M/N (SAMS S/N)

:

1000198474 (09-738-340)

2.4 Minimum-Maximum Thinning Requirements :

5% maximum

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

50°C maximum

                                                            ©Saudi Arabian Oil Company, 2021

Page 212 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat - Hempalin Enamel 52140 (Cont’d)

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

Typical Wet Film Thickness Per Coat

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

75 microns

35 microns

18.4 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

16 hours

None 2 days

                      20oC

10 hours

                      30°C

5 hours

None

  12 hours

                      40oC

4 hours

                      50°C

2 hours

None

     8 hours

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.018 inch

Fluid pressure: 2,200 psi

Conventional Spray

: Tip size

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

41 to 45%, 44 to 48%

                                                     ©Saudi Arabian Oil Company, 2021

Page 213 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat - Hempalin Enamel 52140 (Cont’d)

4.2

4.3

4.4

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

0.87 - 0.93 kg/l, 1.07 - 1.13 kg/l

75 to 80 KU

38°C

4.5

Approved Color/s

:

12170/Light Grey, 40730/Green, 19990/Black, 30100/Blue, 42340/Green, 60270/Brown, 10000/White, 40640/Green, 40980/Green, 50040/Orange, 50630/Red, 50800/Red, 21410/Yellow, 2016S/Caterpillar Yellow, 31420/Blue,7604S/Heather

4.6

Finish

: Glossy

                                                            ©Saudi Arabian Oil Company, 2021

Page 214 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-9

Type of Coating

: Chlorinated Rubber, Self-Priming

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempatex Hi- Build 46330

SAP M/N (SAMS S/N)

:

1000196351 (09-685-442), 1000196312 (09-685-436), 1000196317 (09-685-438), 1000196355 (09-685-448), 1000196359 (09-685-450)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s 08080

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 40°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

120 microns

50 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 215 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-9 - Hempatex Hi-Build 46330 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 16.8 m2/L

3.6 Minimum Number of Coats

:

2

3.7

3.8

Applicable Substrate

: Steel, Concrete

Surface Preparation Requirements:

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:1988).For temporary protection, if required, use a suitable shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. Touch up bare spots to full film thickness.

Concrete: Remove slip agent and other possible contaminants by emulsion washing followed by high pressure hosing with fresh water. Remove scum layer and loose matter to a hard, rough and uniform surface, preferably by abrasive blasting, possibly by other mechanical treatment. Seal surface with suitable sealer, as per relevant painting specification.

                                                            ©Saudi Arabian Oil Company, 2021

Page 216 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-9 Hempatex Hi-Build 46330 (Cont’d)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

16 hours

none 1 day

                      20oC

8 hours

                      30°C

5 hours

None

     8 hours

                      40oC

2 hours

                      50°C

1.5 hours

None

     2 hours

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.021 to 0.023 inch Fluid pressure: 2,200 psi

Conventional Spray

:

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

40 to 44%

1.37 to 1.43 Kg/L

80 to 90 KU

32°C

4.5

Approved Color/s

: 50630/ Red, 13600/Grey, 42260/Green

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 217 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-10

Type of Coating

: Bituminous

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempinol HB 10270

SAP M/N (SAMS S/N)

:

1000194025 (09-611-715), 1000194029 (09-611-720) or 1000194032 (09-611-725)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s 08080

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 45°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

605 microns

375 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 218 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-10 - Hempinol HB 10270 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :     24.8 m2/L

3.6 Minimum Number of Coats

  :    2 for buried service

 3 for immersion service

3.7

Applicable Substrate

   :    Steel and Concrete

3.8

Surface Preparation Requirements:

New steel: Abrasive blasting to minimum Sa 2 or mechanical cleaning to St 3. For temporary protection, if required, use a suitable shop primer. All damage of Shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use HEMPINOL HB 10270.

Concrete: Remove slip agent and other possible contaminants by emulsion washing followed by high pressure hosing with fresh water. Remove scum layer and loose matter to a hard, rough and uniform surface, preferably by abrasive blasting, possibly by other mechanical treatment or acid etching. Seal surface with suitable sealer, e.g. HEMPADUR SEALER 05990, or apply HEMPINOL HB 10270 directly on concrete, diluted 10 – 20 % with HEMPEL’S THINNER 08080.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

2 days

none 3 days 7 days

                      30°C

18 hours

None

     1 day               5 days

                      50°C

-

None

     18 hours           3 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.021 to 0.031 inch Fluid pressure: 2,900 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 219 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-10 - Hempinol HB 10270 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

60 to 64%

1.19 to 1.21 Kg/L

Viscosity

(ASTM D562)

: More than 141 KU

Flash Point

(ASTM D93 or D56)

:

38°C

4.5

Approved Color/s

: 19990/Black

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 220 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 11A

Type of Coating

: Heat Resistant Aluminum Topcoat

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s Silicone Aluminum 56910

SAP M/N (SAMS S/N)

:

1000196488 (09-687-325)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s 08080

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

75 microns

25 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 221 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A - Hempel’s Silicone Aluminum 56910 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

14 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

2 days

none 12 hours

                      30°C

18 hours

None

        4 hours

                      50°C

8 hours

None

     1.5 hours

• Before overcoating after exposure in a contaminated environment, clean thoroughly by

high pressure fresh water Hosing and allow to dry.

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.017 inch

Fluid pressure: 1,800 psi

Conventional Spray

:

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5 4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

33 to 37%

1.07 to 1.13 Kg/L

59 to 65 KU

25°C

Approved Color/s Finish

: 19000/ Aluminum : Semi-Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 222 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A

Type of Coating

: Heat Resistant Aluminum Topcoat

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s Silicone Acrylic 56940

SAP M/N (SAMS S/N)

:

1000196488 (09-687-325)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s 08080

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

up to 15%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

  :

  :

85 microns

25 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 223 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A - Hempel’s Silicone Acrylic 56940 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

11.6 m2/L 21.2 microns (colors)

3.6 Minimum Number of Coats

  :

1

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

16 hours

none 7 hours

                      30°C

 5 hours

None

     2 hours

                      50°C

1.5 hours

None

     ½ hour

• Before overcoating after exposure in a contaminated environment, clean thoroughly by

high pressure fresh water Hosing and allow to dry.

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.017 inch

Fluid pressure: 1,800 psi

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

4.3

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

:

:

:

:

27 to 31%

1.07 to 1.13 Kg/L

59 to 65 KU

25°C

4.5 4.6

Approved Color/s Finish

: 19000/ Aluminum : Semi-Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 224 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11B

Type of Coating

: Heat Resistant Aluminum Coating, Self-Priming

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s Silicone Aluminum 56910

SAP M/N (SAMS S/N)

:

1000196502 (09-687-330)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Hempel’s 08080

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Max. 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

75 microns

25 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 225 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11B - Hempel’s Silicone Aluminum 56910 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

14 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

2 days none 12 hours

                      20oC

24 hours None

                      30°C

18 hours None

     4 hours

                      40oC

12 hours None

                      50°C

8 hours

None

     1.5 hours

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.017 inch

Fluid pressure: 1,800 psi

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

33 to 37%

1.07 to 1.13 Kg/L

59 to 65 KU

25°C

4.5

Approved Color/s

: 19000/ Aluminum

4.6

Finish

: Semi-Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 226 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C

Type of Coating

: Single component inorganic copolymer coating

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : VERSILINE CUI 56990

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year at 25°C

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner

   :  1

: N/A : N/A

: N/A

: Hempel’s Thinner 08080

SAP M/N (SAMS S/N)

: None

2.4 Minimum-Maximum Thinning Requirements : Up to 5% (A/L spray/Brush);

10% (Air spray) by Volume

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C-200°C

3.2 Minimum-Maximum Allowable Relative Humidity

3.3

Typical Wet Film Thickness Per Coat

:

:

40-80%

200 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 227 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - VERSILINE CUI 56990 (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

:

:

150 microns

29.6 m2/L

3.6 Minimum Number of Coats

:

2

3.7

Applicable Substrate

: Carbon Steel and Stainless

Steel

3.8

Surface Preparation Requirements

:

Carbon Steel – Abrasive blasting to near white metal Sa 2½ (ISO 8501-1:2007) with a surface profile corresponding to Rugotest No. 3, BN10a, Keane-Tator Comparator 3.0 G/S, or ISO Comparator Rough Medium (G). Stainless Steel - Abrasive blast cleaned to Sa 2½, ISO 8501-1:2007. Abrasive blasting should be carried out using non-metallic abrasives to achieve a sharp and angular dense surface profile with no blank spots. (Consult HEMPEL for more details)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C
                      20oC
                      30°C
                      40oC
                      50°C

12 hrs 6 hrs 3 hrs 2 hrs 1.5 hrs

Extended* 24 hrs Extended* 12 hrs Extended* 6 hrs Extended* 4 hrs Extended* 3 hrs

    NA**

36 hrs NA** 18 hrs NA** 9 hrs 6 hrs NA** 4.5 hrs NA**

                                                            ©Saudi Arabian Oil Company, 2021

Page 228 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - VERSILINE CUI 56990 (Cont’d)

Minimum curing temperature is 10C *Applicable when the system has not been in service at temperatures higher than ambient. **Please note that VERSILINE CUI 56990 utilizes two separate curing mechanisms.

1. At ambient conditions, the coating will behave like a physical drying paint wherein as the solvent evaporates only little crosslinking takes place.

2. When exposed to heat the second curing mechanism will set in resulting in irreversible crosslinking. After crosslinking the film is fully cured and maximum corrosion protection is reached. It cannot be dissolved in solvent and it will be hard at any temperature. Full curing is achieved after approx. 24 h at 200°C or 5 hours 250°C.

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Large pump is preferred with a pump capacity of 8-12 liters/minute Minimum 45:1 Pump ratio, Nozzle orifice: 0.017”-0.021”, Nozzle pressure: 125-200 bar (Spray data are indicative and subject to adjustment)

Brush: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

4.5

Approved Color/s

:

:

:

:

:

74%

1.9 kg/l

29°C

10710; 19360; 15730

4.6

Finish

: Flat

4.7 Maximum operating temperature

:

650°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 229 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - VERSILINE CUI 56990 (Cont’d)

5. Special Instructions:

Please note until heat cured, care in handling should be observed as the film can become soft at elevated temperatures above approx. 70°C. Heating to 100 deg C for 5 days will start the crosslinking process and therefore harden the coating

                                                            ©Saudi Arabian Oil Company, 2021

Page 230 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-12

Type of Coating

: Epoxy Topcoat, Polyamide Cured

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur Mastic 45580 / 45881

SAP M/N (SAMS S/N)

1000194629 (09-612-364), 1000194797 (09-612-369)

: Or 1000194960 (09-612-375)

Use primer and topcoat of APCS-1B and refer to APCS-12 of Saudi Aramco Engineering Standard

SAES-H-001 for application of aggregate (Hempel’s Anti-Slint 67500)

                                                     ©Saudi Arabian Oil Company, 2021

Page 231 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C

Type of Coating

: Glass Flake Reinforced Epoxy

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur Multi-Strength GF 35870

SAP M/N (SAMS S/N)

:

1000788243, 1000788244

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base : 35879 98870 2.1.2 Hardener (Curing Agent) :

                                          :

2

2.2 Mixing Ratio (Base : Curing Agent)

: 3:1 by Volume

2.3

Thinner

: Hempel’s Thinner 08450

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

5%

2.5

Induction Time

: Nil

2.6

Pot Life

:

1 hour @ 20ºC

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

875 microns

750 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 232 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C - Hempadur Multi-Strength GF 35870 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

28.7 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Applicable Substrate

:

Steel

3.8

Surface Preparation Requirements:

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to near white metal Sa 2½ with a surface profile corresponding to Rugotest No. 3, BN10, Keane-Tator Comparator 3.0 G/S, or ISO Comparator Rough Medium (G). After blasting, clean the surface carefully from abrasives and dust.

Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by wet or dry abrasive blasting or power tool cleaning. Feather edges to sound and intact areas. After wet abrasive blasting hose down the surface with fresh water and allow drying. Touch up bare spots to full film thickness when the surface has become visually dry.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

20 hours

75 days

                      20oC

8 hours

30 days

                      30°C

4 hours

15 days

                      40oC

2 hours

9 days

                      50°C

1 hour

5 days

                                                     ©Saudi Arabian Oil Company, 2021

Page 233 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-19C - Hempadur Multi-Strength GF 35870 (Cont’d)

3.10 Recommended Application Equipment

Airless Spray

: Standard heavy duty airless spray

equipment: Recommended pump ratio

minimum 45:1

Pump output: 12 L/min. (theoretical)

: N/A

: Not suitable

Conventional Spray

Trowel/Hand

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

87%

1.3 Kg/L

35ºC

4.5

Approved Color/s

: 27230, 17380

4.6

Finish

: Glossy

                                                            ©Saudi Arabian Oil Company, 2021

Page 234 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A

Type of Coating

: Fiberglass Reinforced Epoxy: Hand Applied

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempel’s Epoxy Resin 05500

SAP M/N (SAMS S/N)

: None

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 05509 98500

2.2 Mixing Ratio (Base : Curing Agent)

: 1.8:1 by Volume

2.3

Thinner

SAP M/N (SAMS S/N)

: N/A

: N/A

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

3 hours @ 25ºC 1 hour @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

15- 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

500 microns

500 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 235 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Hempel’s Epoxy Resin 05500 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :    m2/L

3.6 Minimum Number of Coats

  :    1

3.7

Applicable Substrate

: steel, concrete

3.8

Surface Preparation Requirements:

Steel: Abrasive blasting to Sa 2½ or Sa 3 depending on area of use. Surface profile corresponding to Rugotest No. 3 BN11, Keane-Tator Comparator 5.5 G/S, or ISO Comparator, Coarse (G). Oil and grease must be removed with suitable detergent, salt and other contaminants by (high pressure) fresh water cleaning prior to blasting. After blasting clean the surface carefully from abrasives and dust. The blasted and cleaned surface may advantageously be primed with HEMPADUR 15590, at a dry film thickness of 30 to 50 micron. Avoid a higher dry film thickness of the primer.

Concrete: The concrete must be of good quality and fully cured, e.g. 28 days for normal Portland cement, and completely dry with a humidity content in the surface below 4%. The concrete must also be controlled for absence of capillary water action or for subsoil water.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

54 hours

54 days 54 hours

16 days (water)

                      30°C

14 hours

14 days

   14 hours

3½ days (water)

                      50°C

 4 hour

4 days

     4 hours

2 days (water)

                                                            ©Saudi Arabian Oil Company, 2021

Page 236 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Hempel’s Epoxy Resin 05500 (Cont’d)

3.10 Recommended Application Equipment

As indicated in below Section 5 Special Instructions.

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

100%

1.07 to 1.13 Kg/L

Viscosity

(ASTM D562)

: More than 140 KU

Flash Point

(ASTM D93 or D56)

: N/A

Approved Color/s

:

Finish

: Glossy

Special Instructions:

Application: Application of resin and glassfiber mat:

Apply HEMPEL’S EPOXY RESIN 05500 by means of medium pile (mohair) rollers in a wet film thickness of 500-600 micron. Ensure a homogeneous wet film distribution and proper film formation during application. Roll out the full glassfiber mat (e.g. HEMPEL’S GLASSFIBER MAT 690SA), straighten the mat by pulling gently at both ends simultaneously and lay the mat on the wet resin. In case working with the full length of the mat is difficult and shows a high density of wrinkles, cutting the mat in lengths of 6 to 8 meters is recommended.

For application on the side shell, lengths of 3 to 4 meters may be considered in order to prevent sagging of the coating systems at longer lengths. Press the glassfiber mat into the resin, using serrated/split-washer rollers. It is important that this process is maintained for a sufficient period of time, using an adequate pressure, in order to flatten and saturate the mat and expel all (entrapped) air from the coating system. Apply additional resin and repeat the rolling procedure in order to ensure a proper saturation. This process should be completed before HEMPEL’S EPOXY RESIN 05500 has reached the end of its pot life. Small serrated/split-washer rollers are recommended for usage on areas like corners and joints.

                                                     ©Saudi Arabian Oil Company, 2021

Page 237 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Hempel’s Epoxy Resin 05500 (Cont’d)

The overlap of the glassfiber mat from side shell on the tank bottom should be at least 30 cm. A minimum overlap of 10 cm between adjacent mats is recommended. Do not allow overlaps of mats to be positioned on the same location as welding seams or areas that have been treated with a filler or epoxy resin-silica sand mixture.

Wrinkles in the mat must be avoided at all times. If they are not removed by the process described above, they should be eliminated while the epoxy resin is still wet, by making an incision in the center of the wrinkle with a sharp knife, followed by pressing with a serrated roller.

Stripe Coating: Edges corners, manual welds and placed difficult to cover properly, should be stripe coated (touched up) with HEMPEL’S EPOXY RESIN 05500 either before or after application of the first coat of epoxy resin and glassfiber mat. Normally, a minimum of two stripe coats is recommended in order to achieve the specified dry film thickness.

Application of surface tissue: It is recommended to apply a layer of surface tissue (e.g. HEMPEL’S GLASSFIBER SURFACING TISSUE 691SA), shortly after application of the first coat of epoxy resin and glassfiber mat. This surface tissue has the purpose to imbed fibers from the glassfiber mat which are protruding through the epoxy resin and is applied in accordance with the same procedure as for the application of the glassfiber mat (apply epoxy resin, lay out mat, saturate). If rectified by the given condition of the first coat of epoxy resin and glassfiber mat, it may be considered to apply the second coat of epoxy resin without surface tissue. When this stage is completed, the glassfiber system will have a typical (total) dry film thickness of approximately 1000-1200 micron.

Application of sealer coat: When the full glassfiber-epoxy resin system is through dry (after approximately 24 hours at 20°C/68°C), the surface should be sanded down with emery paper (grit 240-320) to remove any protruding glass fibers and imbedded or fairly adhering contamination. After sanding, clean the surface thoroughly (for dust) by means of an industrial vacuum cleaner. Apply one seal coat of HEMPEL’S EPOXY RESIN 05500 at a wet film thickness of 300 micron.

                                                            ©Saudi Arabian Oil Company, 2021

Page 238 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B

Type of Coating

: Fiberglass Reinforced Epoxy: spray applied

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur Spray-fiber 35890

SAP M/N (SAMS S/N)

: None

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : 35899 95890 2.1.2 Hardener (Curing Agent) :

                                          :

2

2.2 Mixing Ratio (Base : Curing Agent)

: 2:1 by Volume

2.3

Thinner

SAP M/N (SAMS S/N)

: N/A

: N/A

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: N/A

2.6

Pot Life

Application

:

30 minutes @ 20ºC @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

15- 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

1,250 microns

1,250 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 239 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B - Hempel’s Spray Fiber 35890 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats

3.7

3.8

Applicable Substrate

Surface Preparation Requirements

m2/L

1

steel and concrete

:

:

:

:

Steel: Abrasive blasting to Sa 2½ or Sa 3, depending on area of use. Surface profile corresponding to Rugotest No. 3 BN 11, Keane-Tator Comparator 5.5 G/S, or ISO Comparator, Coarse (G). Oil and grease must be removed with suitable detergent, salt and other contaminants by (high pressure) fresh water cleaning prior to blasting. After blasting, clean the surface carefully from abrasives and dust. The blasted and cleaned surface may advantageously be primed with HEMPADUR 15590.

Concrete: Remove slip agent and other possible contaminants by emulsion cleaning followed by high pressure hosing with fresh water. Remove scum layer and loose matter to a hard, rough and uniform surface, preferably by abrasive blasting, possibly by other mechanical treatment, flame cleaning or acid etching. Seal surface with suitable sealer, e.g. HEMPADUR SEALER 05990 (furthermore, see Product Data Sheet for 05990).

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

1 day 2.5 days 1 day

  16 days

                      30°C

12 hours

1 days

  12 hours

3½ days

                      50°C

4 hour

10 hours

    4 hours

2 days

                                                            ©Saudi Arabian Oil Company, 2021

Page 240 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B Hempel’s Spray Fiber 35890 (Cont’d)

3.10 Recommended Application Equipment:

Airless Spray (for primer)

Trowel (for caulking compound)

Aluminum/Stainless Steel serrated Rollers (for pressing of chopped fiberglass)

Specialized ‘Graco’ hydrocat with fiber chopper

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

100%

1.17 to 1.23 Kg/L

100 to 120 KU

Flash Point

(ASTM D93 or D56)

: >60ºC

4.5

Approved Color/s

: 60090/Brown

4.6

Finish

: Glossy

Special Instructions:

5.1

Abrasive blast clean to Sa 2½ with surface profile Rugotest no. 3 BN11 min

5.2

Apply one coat of primer (Hempadur 155900) to a dry film thickness of 40 microns.

5.3 When dry but within 30 days and by using modified ‘Graco’ Hyrdocat, apply Hempel’s Sprayfiber 3588 caulking material to all welds, plate laps, fillets and other areas of sharp dimensional changes.

5.4 When dry but within three days @ 20ºC apply a mixture of Hempel’s Sprayfiber 35890 and a chopped fiberglass. The mixture is applied by a modified ‘Graco’ hydrocat to a minimum of 1,250 microns dry film thickness. The fiberglass is applied @ approximately 450 g/m2.

5.5 When dry but within two days @ 20ºC, apply a gelcoat of Sprayfiber 35890 by using a

Graco hydrocat. The dry film thickness should be 350 microns minimum.

                                                     ©Saudi Arabian Oil Company, 2021

Page 241 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20B - Hempel’s Spray Fiber 35890 (Cont’d)

5.6

The system shall have a minimum total of 1,600 microns film thickness.

5.7

Required materials in addition to Hempel’s Spray Fiber 35890:

5.7.1 Primer: Hempadur 15590

5.7.2 Caulking Compound: Mixture of Hempel’s Epoxy Resin 35890 and Hempel’s Anti Slint 67500. Approx. 2.0 – 2.5 kgs 67500 to 750 ml of mixed resin 35890.

5.7.3 Hempadur Multi-Mil 85490: Filler for deep pitting

5.7.4 Hempel’s Glassfiber roving 689SA

                                                            ©Saudi Arabian Oil Company, 2021

Page 242 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A

Type of Coating

: Epoxy, Polyamine Cured

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur 45070

SAP M/N (SAMS S/N)

: Primer: 09-612-352/357/358/359/360/361/459/462/465/467; 1000194560 (09-612-352) or 1000195239 (09-612-459);

Topcoat: 1000194565 (09-612-357), 1000194568 (09-612-358), 1000194590 (09-612-359), 1000195273 (09-612-462), 1000195277 (09-612-465) or 1000195314 (09-612-467)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : 45079 97070 2.1.2 Hardener (Curing Agent) :

                                          :

2

2.2 Mixing Ratio (Base : Cueing Agent)

: 4:1 by Volume

2.3

Thinner

: Hempel’s thinner 08450

SAP M/N (SAMS S/N)

:

1000198471 (09-738-300)

2.4 Minimum-Maximum Thinning Requirements :

5% maximum

2.5

Induction Time

: Nil

2.6

Pot Life

Application

1½ hours @ 25ºC

: ½ hour @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

                                                     ©Saudi Arabian Oil Company, 2021

Page 243 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A - Hempadur 45070 (Cont’d)

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

205 microns

150 microns

29.2 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Applicable Substrate

  :             steel

3.8

Surface Preparation Requirements:

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Clean damaged areas thoroughly by power tool cleaning to St 3 (spot-repairs) or by abrasive blasting to min. Sa 2, preferably to Sa 2½(ISO 8501-1:1988). Improved surface preparation will improve the performance. As an alternative to dry cleaning, water jetting to min. WJ-3, preferably WJ-2 (NACE No. 5/SSPC-SP 12), may be used. A flash-rust degree of maximum FR-2 (Hempel’s standard) is acceptable before application. Feather edges to sound and intact areas. Dust off residues. Touch up bare spots to full film thickness. On pit-corroded surfaces, excessive amounts of salt residues may call for high pressure water jetting, wet abrasive blasting, alternatively dry abrasive blasting, high pressure fresh water hosting, drying, and finally dry abrasive blasting again.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

32 hours

10 days 32 hours

                      20oC

16 hours

5 days

        16 hours

                      30°C

10 hours 3-5 days

        10 hours

                      40oC

6-9 hours 1½ days 6 hours

                      50°C

4 hours

1 day

          4 hours

                                                            ©Saudi Arabian Oil Company, 2021

Page 244 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A - Hempadur 45070 (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

                       Conventional Spray

                       Trowel/Hand

                       Brush

4.

Physical Properties

: Tip Size 0.021 to 0.023 inch Fluid pressure 3,600 psi : N/A

: Touch up

:

Touch up

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

71 to 75%

1.37 to 1.43 Kg/L

105 to 115 KU

35ºC

4.5

Approved Color/s

: 11630/Off White, 17380/Grey, 23550/Yellow, 50806/Red

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 245 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26

Type of Coating

: Epoxy Mastic, Polyamine Cured

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur Mastic 45880 (Winter Version) / Hempadur Mastic 45881 (Summer Version)

SAP M/N (SAMS S/N)

:

1000194381 (09-612-330), 1000194386 (09-612-331), 1000194401 (09-612-332), 1000194407 (09-612-333), 1000194420 (09-612-334), 1000194427 (09-612-335) or 1000194471 (09-612-336)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 45889 95880 (Winter) / 95881 (Summer)

2.2 Mixing Ratio (Base : Curing Agent)

: 3:1 by Volume

2.3

Thinner

: Hempel’s 08450

SAP M/N (SAMS S/N)

:

1000198572 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements :

up to 5%

2.5

Induction Time

: Nil

2.6

Pot Life

Application

: 2¼ hours @ 25ºC ¾ hours @ 40ºC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 75%

                                                            ©Saudi Arabian Oil Company, 2021

Page 246 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26 - Hempadur Mastic 45880 / 45881 (Cont’d)

3.3

Typical Wet Film Thickness Per Coat

  :

200 microns 169 microns (Alum.)

3.4

Typical Dry Film Thickness Per Coat

  :

150 microns

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :            30.8 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

10 hours

60 days 16 hours

                      20oC

                      30°C

1 day

None

     1 hour

                      40oC

                      50°C

6 hours

None

    ¼ hour

7 days

5 days

3.8

Recommended Application Equipment

Airless (A/L) Spray

: Tip size: 0.017 to 0.023 inch Fluid pressure: 3,600 psi

Conventional Spray

: No

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

75 to 79% 72 to 76% (Aluminum)

                                                     ©Saudi Arabian Oil Company, 2021

Page 247 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26 - Hempadur Mastic 45880 / 45881 (Cont’d)

4.2

Product Weight

(ASTM D1475)

4.3

4.4

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

1.37 to 1.43 Kg/L 1.33 to 1.39 kg/l (Aluminum)

105 to 115 KU

35°C

4.5

Approved Color/s

: Gray, Black, White, Orange, Red, Yellow, Aluminum

4.6

Finish

: Semi-Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 248 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26T Topcoat

Type of Coating

: Aliphatic Polyurethane Topcoat

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempathane Topcoat 55210

SAP M/N (SAMS S/N)

:

1000194672 (09-612-365), 1000194675 (09-612-366), 1000194793 (09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)

Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat.

                                                     ©Saudi Arabian Oil Company, 2021

Page 249 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A

Type of Coating

:

100% Solids Epoxy

Manufacturer

: Hempel Paints (Saudi Arabia) W.L.L.

Product Name : Hempadur 87540

SAP M/N (SAMS S/N)

:

1000686070 (09-000-497)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 (87549) (97740)

2.2 Mixing Ratio

:

(2:1 by volume)

2.3

Thinner

SAP M/N (SAMS S/N)

: N/A

: N/A

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: N/A

2.6

Pot Life

: N/A for dual feed spray

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 to 90°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

Max. 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

500 to 625 microns

500 to 625 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 250 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A - Hempadur 87540 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

40 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

:

Steel

3.8

Surface Preparation Requirements

:

New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive grit blasting to minimum Sa 2½ (ISO8501-1:2007). Recommended surface profile is Rz 75-100 micron/3-4 mils, corresponding to Rugotest No. 3, BN10, Keane-Tator Comparator, minimum 3.0 G/S, or ISO Comparator, Medium (G). After blasting clean the surface carefully from abrasives and dust. After blasting, clean the surface carefully from abrasives and dust.

Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive grit blasting to minimum Sa 2½ (ISO 8501-1:2007). Recommended surface profile is Rz 75-100 micron/3-4 mils, corresponding to Rugotest No. 3, BN10, Keane-Tator Comparator, minimum 3.0 G/S, or ISO Comparator, Medium (G). After blasting clean the surface carefully from abrasives and dust. After blasting, clean the surface carefully from abrasives and dust.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

8 hours

3 days

    4 hours

6 days (water)

                      30°C

                      50°C

3 hours

2 hours

2 days

    1 hour             2 days (water)

2 days

    10 minutes       4 hours (water)

                                                     ©Saudi Arabian Oil Company, 2021

Page 251 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A - Hempadur 87540 (Cont’d)

3.10 Recommended Application Equipment

Dual Feed Airless Spray

: Tip size to 0.025 inch

Fluid Pressure 2,500 psi

Conventional Spray

: N/A

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

1.8 Kg/L

121ºC

4.5

Approved Color/s

: 50700/Red

4.6

Finish

: Glossy

                                                            ©Saudi Arabian Oil Company, 2021

Page 252 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

l.

Jotun – Approved Products

              APCS-1A

Resist 78 Resist 5 WF Penguard Express Penguard FC

             APCS-1B

Inorganic Zinc-Primer: Solvent-Based Inorganic Zinc Primer: Water-Based Epoxy Intermediate Coat Epoxy Topcoat

Penguard Express ZP Use Epoxy Intermediate Coat and Topcoat of APCS-1A

Epoxy Primer

              APCS-1C

Barrier 77 Use Epoxy Intermediate Coat and Topcoat of APCS-1A

Zinc-Rich Epoxy Primer

             APCS-1D

Use APCS-1A as primer and intermediate coat Hardtop XP

Polyurethane Topcoat

              APCS-1E

Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

               APCS-1F

Use APCS-1C as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

              APCS-2A/2C

Tankguard A.R.

Phenolic Epoxy

              APCS-2B

Tankguard 412

Amine Aduct Solvent-Free Epoxy

              APCS-2D

Tankguard Storage

Epoxy

              APCS-4

Pilot Primer Bengalac Silver Aluminum

Zinc Phosphate Primer Alkyd Topcoat: Aluminum

              APCS-6

Use Primer of APCS-4 Pilot II

Alkyd Topcoat

                                                     ©Saudi Arabian Oil Company, 2021

Page 253 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

      Jotun – Approved Products (Cont’d)

              APCS-11A

Use primer of APCS-1A Solvalitt Al

              APCS-11B

Heat-Resistant Topcoat: Aluminum

Solvalitt Al

Heat Resistant System: (Self-Priming)

              APCS-12

Use APCS-1B as primer, intermediate and topcoat

              APCS-17A

Resist 78

              APCS-17B

Resist 5 WF

              APCS-20A

Tankguard Storage Chemtech GM Clear

              APCS-22A

Jotamastic 80 Penguard FC

              APCS-26

Inorganic Zinc-Primer: Solvent-Based

Inorganic Zinc Primer: Water Based

Phenolic Epoxy H.S. Epoxy

Epoxy Primer Epoxy Topcoat

Jotamastic 80

Epoxy Mastic

              APCS-26T

Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

                                                            ©Saudi Arabian Oil Company, 2021

Page 254 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A Primer

Type of Coating

Manufacturer

:

:

Inorganic Zinc Primer, Solvent-Based

Jotun Saudia Company Ltd.

Product Name : Resist 78

SAP M/N (SAMS S/N)

:

1000194146 (09-611-958)

Storage

1.1

Shelf life, sheltered storage @ 23 °C maximum

: Comp A - 6 months Comp B - 48 months

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : Resist 78 - Comp A 2.1.2 Hardener (Curing Agent) :

Jotun Zinc 100 - Comp B

2

2.2 Mixing Ratio (by Volume) :

9 parts of A : 2.6 parts of B

2.3

Thinner

: Thinner No. 25

SAP M/N (SAMS S/N)

:

1000198445 (09-738-220)

2.4 Minimum-Maximum Thinning Requirements :

0 to 5% by Volume

2.5

Induction Time

: N/A

2.6

Pot Life

:

8 hours @ 23°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50 °C

3.2 Minimum-Maximum Allowable Relative Humidity (Jotun Zinc 100 LHA can be used to speed up curing below 60% RH)

:

60 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

90 microns

65 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 255 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A Primer – Resist 78 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :  28.8 m2/L

3.6 Minimum Number of Coats

  :  1

3.7

Applicable Substrate

  :  Carbon Steel

3.8

Surface Preparation Requirements

  :  Sa 2½ (ISO 8501-1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

13 Hours None 45 Minutes 13 Hours *

                      20oC

 8 Hours

None 30 Minutes 8 Hours *

                      30°C                       4 Hours            None

  30 Minutes     4 Hours

*

                      40oC

1.5 Hours None 25 Minutes 1.5 Hours *

                      50°C

1 Hour None 20 Minutes * *

• Curing Time to be verified by MEK test according to ASTM D4752-87.

During and after application, the Relative humidity shall be minimum 50%. Consult Manufacturer application guide.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.017 to 0.021 inch Fluid Pressure 1,400 psi

Conventional Spray

: N/A

Brush

: Small areas only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

72 ±2%

                                                            ©Saudi Arabian Oil Company, 2021

Page 256 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A Primer – Resist 78 (Cont’d)

4.2

4.3

4.4

Product Weight

(ASTM D1475)

:

2.5 Kg/L

Viscosity

(ASTM D562)

: N/A

Flash Point

(ASTM D93 or D56)

:

14 °C

4.5

Approved Color/s

: Grey

4.6

Finish

: matt

Special Instructions: Consult Manufacturer application guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 257 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/17B Primer

Type of Coating

Manufacturer

:

:

Inorganic Zinc Primer: Water-Based

Jotun Saudi Company Ltd.

Product Name : Resist 5 WF

SAP M/N (SAMS S/N)

:

1000194182 (09-611-969)

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

: 2 years

Mixing

2.1

No. of Components 2.1.1 Base : Resist 5 WF Comp A- Liquid 2.1.2 Hardener (Curing Agent) : Resist 5 WF Comp B- Zinc

                                          :

2

2.2 Mixing Ratio (by Volume)

: 6.25 parts A : 3.75 parts B

2.3

Thinner

: Sweet Water

SAP M/N (SAMS S/N)

: N/A

2.4 Minimum-Maximum Thinning Requirements : Not required

2.5

Induction Time

: N/A

2.6

Pot Life

Application

: 5 hours @ 25°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

100 microns

75 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 258 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/17B Primer – Resist 5 WF (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

30.0 m2/L

3.6 Minimum Number of Coats

   :

1

3.7

Applicable Substrate

     :         Carbon Steel

3.8

Surface Preparation Requirements

     :         Sa 2½ (ISO 8501-1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

1 Day             None                ⅔ Hour                *                10 Days

                      20oC

8 Hours

None ⅔ Hour * 6 Days

                      30°C                         6 Hours           None               ½ Hour                *                 5 Days

                      40oC

5 Hours

None 20 Minutes

 *

       3 Days

                      50°C

4 Hours           None                ¼ Hour                *                 3 Days

• Drying times may change depending on thickness, humidity, airflow etc. Full Cure and To Service are the same. Consult manufacturers Technical Data Sheet and Application Guide for further details.

3.10 Recommended Application Equipment

Airless (A/L) Spray R-F-W-G-34020

: Via High Pressure pump

Conventional Spray

: Tip Size Atomizing Pressure

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 259 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/17B Primer – Resist 5 WF (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

73 to 77%

2.4 Kg/L

85 to 90 KU

Flash Point

(ASTM D93 or D56)

: Non- Flammable

4.5

Approved Color/s

: Grey

4.6

Finish

: Matt

Special Instructions: Consult manufacturers’ Technical Data Sheet and Application Guide for further details.

                                                            ©Saudi Arabian Oil Company, 2021

Page 260 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F Intermediate Coat

Type of Coating

: Amine cured Epoxy- Intermediate

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Penguard Express

SAP M/N (SAMS S/N)

:

1000194629 (09-612-364)

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

:

24 Months

Mixing

2.1

No. of Components 2.1.1 Base : Penguard Express Comp A 2.1.2 Hardener (Curing Agent) : Penguard Express Comp B

                                          :

2

2.2 Mixing Ratio (by Volume)

: 4 parts A : 1 part B

2.3

Thinner

: Thinner No. 17

SAP M/N (SAMS S/N)

:

1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements :

0-10 %

2.5

Induction Time

: N/A

2.6

Pot Life

:

2 hours @ 23°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 to 60 °C

10

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 to 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

175 microns

130 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 261 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F Intermediate Coat – Penguard Express (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers

  :   29.6 m2/L

Dry Film Thickness

3.6 Minimum Number of Coats

  :   1

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

Carbon Steel : Sa 2½

  :  CS, GS, Aluminum, Shop

primed steel, Coated surfaces, Concrete

Galvanised steel: Light brush blasting using nonmetallic abrasive leaving a clean, rough and even pattern.

Aluminum: Abrasive blast cleaning to achieve a surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.

Shop primed steel: Abrasive swept or alternatively blasted to Sa 2 of at least 70 % of the surface.

Coated surfaces: Clean, dry and undamaged compatible coating (ISO 12944-4 6.1)

Concrete: Minimum 4 weeks curing. Moisture content maximum 5 %. Prepare the surface by means of enclosed blast shot or diamond grinding and other appropriate means to abrade the surrounding concrete and to remove laitance. Consult Manufacturer application guide.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

4 Hours 10 Days 6 Hours 8 Days 10 Days

                      20oC                       3 Hours            7 Days               4 Hours             5 Days           7 Days

                      30°C                       2 Hours            6 Days            2.5 Hours             4 Days           6 Days

                                                            ©Saudi Arabian Oil Company, 2021

Page 262 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F Intermediate Coat – Penguard Express (Cont’d)

                      40oC

1 Hour 5 Days 2 Hours 3 Days 5 Days

                      50°C

40 Minutes 3 Days 1.5 Hours 2 Days 3 Days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.017 to 0.023 inch Fluid pressure 2,100 psi

Conventional Spray

: Not recommended

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

74% (± 2)

1.51 Kg/L

300 CPS

32°C

4.5

Approved Color/s

: Red, Grey, Buff

4.6

Finish

: matt

 Special Instructions:  Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 263 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/22A Topcoat

Type of Coating

: Polyamide cured Epoxy-Topcoat

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Penguard FC

SAP M/N (SAMS S/N)

:

1000194799, 1000194420, 1000193911

Storage

1.1

Shelf life, sheltered storage @ 23 °C maximum

: 24 Months

Mixing

2.1

No. of Components : 2.1.1 Base : Penguard FC Comp A 2.1.2 Hardener (Curing Agent) : Penguard FC Comp B

2

2.2 Mixing Ratio (by Volume)

: 4 parts A : 1 part B

2.3

Thinner

: Thinner No. 17

SAP M/N (SAMS S/N)

:

1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements : According to temperature

2.5

Induction Time

: N/A

2.6

Pot Life

:

2 hours @ 23°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

Typical Wet Film Thickness Per Coat

  :

130 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 264 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/22A Topcoat – Penguard FC (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

  :    80 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :    24.8 m2/L

3.6 Minimum Number of Coats

  :    1

3.7

Applicable Substrate

  :    CS, SS, GS, Concrete)

3.8

Surface Preparation Requirements : Carbon steel: Sa 2½ (ISO 8501-1)

                                                                                                       Stainless steel: Abrasive blast

cleaning to achieve a surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.

                                                                             Galvanised steel: Cleanliness

corresponding to description of Sa 1 (ISO 8501-1)

                                                                                          Coated surfaces: Clean, dry and

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum

Maximum

undamaged compatible coating (ISO 12944-4 6.1)

To Handle To Service Full Cure

                      10°C

15 Hours 3 Months 15 Hours N/A 8 Days

                      20oC                       10 Hours          3 Months              10 Hours          N/A            5 Days

                      30°C                       6 Hours            3 Months              6 Hours            N/A            3 Days

                      40oC

4 Hours 2 Months 2 Hours N/A 2 Days

                      50°C

3 Hours 1.5 Months 1.5 Hours N/A 1 Day

                                                     ©Saudi Arabian Oil Company, 2021

Page 265 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/22A Topcoat – Penguard FC (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.018 to 0.027 inch Fluid pressure 2,100 psi

Conventional Spray

: Not recommended

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

62% ± 2

1.4 Kg/L

82 to 100 KU

28°C

4.5

Approved Color/s

: Grey, Yellow, Red or as per approved

4.6

Finish

: Semi-Gloss

5. Special Instructions: Consult Manufacturer Application Guide.

                                                           ©Saudi Arabian Oil Company, 2021
   

Page 266 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E Primer

Type of Coating

: Epoxy Primer

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Penguard Express ZP

SAP M/N (SAMS S/N)

:

1000194626

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

:

24 Months

Mixing

2.1

                                          :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) : Penguard Express Comp |B

2 Penguard Express ZP Comp A

2.2 Mixing Ratio (by Volume)

2.3

Thinner

: 4 parts A : 1 part B

: Thinner No. 17

SAP M/N (SAMS S/N)

:

1000198455 (09-738-280)

2.4 Minimum-Maximum Thinning Requirements :

0-10 %

2.5

Induction Time

: N/A

2.6

Pot Life

:

2 hours @ 23°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 to 60 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

100 microns

75 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 267 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E Primer – Penguard Express ZP (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers : 29.6 m2/L Dry Film Thickness

3.6 Minimum Number of Coats : 1

3.7

Applicable Substrate : Carbon Steel, Shop primed Steel,

Coated surface

Surface Preparation Requirements : Carbon steel: Sa 2½ (ISO 8501-1) 3.8 Shop primed steel: Abrasive swept or alternatively blasted to Sa 2 (ISO 8501-1) of at least 70 % of the surface.

                                                                                             Coated surfaces Clean: Clean, dry

and undamaged compatible coating (ISO 12944-4 6.1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

4 Hours 10 Days 15 Hours 8 Days

     8 Days

                      20oC                       3 Hours         10 Days               12 Hours

5 Days            5 Days

                      30°C                       2 Hours          7 Days                10 Hours        4 Days            4 Days

                      40oC

1 Hour 5 Days

     5 Hours

 3 Days            3 Days

                      50°C

45 Minutes 3 Days 2 Hours

2 Days 2 Days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.013 to 0.023 inch Fluid pressure 2,100 psi

Conventional Spray

: Not recommended

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 268 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E Primer – Penguard Express ZP (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

74 ±2 %

1.53 Kg/L

Viscosity

(ASTM D562)

: KU

Flash Point

(ASTM D93 or D56)

:

32°C

4.5

Approved Color/s

: Red

4.6

Finish

: matt

Special Instructions: Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 269 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F Primer

Type of Coating

: Zinc-Rich Epoxy Primer

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Barrier 77

SAP M/N (SAMS S/N)

:

1000195348 or 1000195361

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

: 24 Months

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : Barrier 77 Comp A 2.1.2 Hardener (Curing Agent) : Barrier/Barrier 77 Comp B

2

2.2 Mixing Ratio (by Volume) : 3 parts A : 1 part B

2.3

Thinner

: Thinner No. 17

SAP M/N (SAMS S/N)

:

1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements :

0-5%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

:

1 day @ 23°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 60 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

75 microns

40 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 270 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F Primer – Barrier 77 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers : 21.2 m2/L Dry Film Thickness

3.6 Minimum Number of Coats : 1

3.7

Applicable Substrate : Carbon steel and Shop primed steel

Surface Preparation Requirements : Carbon steel: Sa 2½ (ISO 8501-1) 3.8 Shop primed steel: Abrasive swept or alternatively blasted to Sa 2 (ISO 8501-1) of at least 70% of the surface.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

2 Hours 2 Months 2 Hours 7 Days

                      20oC

1.5 Hours 1 Month 1.5 Hours 6 Days

                      30°C                       1 Hour         15 Days                1 Hour                                    2 Days

                      40oC                      40 minutes      7 Days              40 minutes

2 Days

                      50°C

30 minutes 3 Days 40 minutes 2 Days

3.10 Recommended Application Equipment

Airless (A/L) Spray Fluid Pressure 2,100 psi

: Tip size 0.015 to 0.021 inch

Conventional Spray

: Not recommended

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

53 ±2%

                                                     ©Saudi Arabian Oil Company, 2021

Page 271 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F Primer – Barrier 77 (Cont’d)

4.2

Product Weight

(ASTM D1475)

4.3

4.4

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

2.2 Kg/L

85-105 KU

25°C

4.5

Approved Color/s

: Grey

4.6

Finish

: Flat

Special Instructions: Consult Manufacturer Application Guide.

                                                            ©Saudi Arabian Oil Company, 2021

Page 272 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat

Type of Coating

: Polyurethane Enamel Topcoat

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Hardtop XP

SAP M/N (SAMS S/N) (09-612-367), 1000194795 (09-612-368) or 1000194851 (09-612-371)

1000194672 (09-612-635), 1000194675 (09-612-366), 1000194793

:

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

: 48 months

Mixing

2.1

                                          :

No. of Components 2.1.1 Base : Hardtop XP Comp A 2.1.2 Hardener (Curing Agent) : Hardtop XP Comp B

2

2.2 Mixing Ratio (by Volume)

: 8 parts A : 1 part B

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

Jotun Thinner No. 10

1000198479 (09-738-345)

2.4 Minimum-Maximum Thinning Requirements :

2.5

Induction Time

: N/A

2.6

Pot Life

:

1.5 Hours @ 23 °C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 60 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

80 microns

50 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 273 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat - Hardtop XP (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 25.2 m2/L

3.6 Minimum Number of Coats

: 1

3.7

3.8

Applicable Substrate

: Coated surfaces

Surface Preparation Requirements

: Coated surfaces: Clean, dry and

undamaged compatible coating (ISO 12944-4 6.1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

14 Hours Extended 14 Hours 14 Days

                      20oC

               9 Hours         Extended             10 Hours                                 8 Days

                      30°C

6 Hours Extended 7 Hours 5 Days

                      40oC

4 Hours Extended 4 Hours 3 Days

                      50°C

3 Hours Extended 4 Hours 2 Days

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip size 0.013 to 0.019 inch Fluid Pressure 2,100 psi

: Tip size 0.011 to 0.019 (HVLP) Tip size 1.1 to 1.9 (pressure pot)

Brush

: For stripe coating / touch-up

                                                            ©Saudi Arabian Oil Company, 2021

Page 274 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat - Hardtop XP (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

63 ±2%

1.4 Kg/L

190-240 CPS

30°C

4.5

Approved Color/s

: Yellow, White, Gray, Green, Red

4.6

Finish

: Gloss

 Special Instructions:  Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 275 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C

Type of Coating

: Phenolic Epoxy

Manufacturer

:

Jotun Saudia Co. Ltd.

Product Name : Tankguard AR

SAP M/N (SAMS S/N)

:

1000195232 or 1000195235

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

: 6 Months

Mixing

2.1

No. of Components 2.1.1 Base : Tankguard AR AL Comp A 2.1.2 Hardener (Curing Agent) : Tankguard AR Comp B

                                          :

2

2.2 Mixing Ratio (by Volume)

: 6.5 parts A : 1 part B

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

Jotun Thinner No. 23

1000198377

2.4 Minimum-Maximum Thinning Requirements :

0-5%

2.5

Induction Time

2.6

Pot Life

Application

:

:

10 min @ 23°C

2 hours @ 23°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

150 microns

100 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 276 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Tankguard AR (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :   27.2 m2/L

3.6 Minimum Number of Coats

: 3

3.7

Applicable Substrate

: CS, SS, Aluminum, Concrete

3.8

Surface Preparation Requirements

: Carbon Steel: Sa 2½ (ISO

8501.1) Stainless Steel: Abrasive blast cleaning to achieve a surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.

Concrete: Dry abrasive

“Brush Blast” cleaning to NACE No. 4/SSPC-SP 7

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

24 Hours 30 Days 24 Hours 14 Days 14 Days

                      20oC

10 Hours 30 Days 10 Hours 7 Days 7 Days

                      30°C

8 Hours 30 Days 7 Hours

5 Days

5 Days

                      40oC

4 Hours 14 Days

4 Hours

3 Days

3 Days

                      50°C

2 Hours 14 Days 2 Hours

2 Days 2 Days

                                                     ©Saudi Arabian Oil Company, 2021

Page 277 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Tankguard AR (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.017 to 0.021 inch Fluid pressure 2,100 psi

Conventional Spray

: Not Recommended

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

68 ± 2 %

1.63-1.67 Kg/L

50-120 CPS

29°C ± 2

4.5

Approved Color/s

: Aluminum, Aluminum Red toned

4.6

Finish

: matt

Special Instructions: Consult Manufacturer Application Guide

                                                            ©Saudi Arabian Oil Company, 2021

Page 278 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B

Type of Coating

: Amine Aduct Solvent Free Epoxy

Manufacturer

:

Jotun Saudia Co. Ltd

Product Name : Tankguard 412

SAP M/N (SAMS S/N)

:

1000195317 (09-612-518) or 1000195341 (09-612-546)

Storage

1.1

Shelf life, sheltered storage @ 23 °C maximum

: 12 months Comp. A 12 months Comp. B

Mixing

2.1

No. of Components 2.1.1 Base : Tankguard 412 Comp A 2.1.2 Hardener (Curing Agent) : Tankguard 412 Comp B

                                          :

2

2.2 Mixing Ratio (by Volume)

: 2 parts A : 1 part B

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

1000198449

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

Application

:

:

10 min. 23°C

1 hour at 23°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 60 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

Typical Wet Film Thickness Per Coat

  :

100 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 279 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B - Tankguard 412 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat : 100 microns

Theoretical Coverage @ 25 Micrometers : 40 m2/L Dry Film Thickness

3.6 Minimum Number of Coats : 3

3.7

Applicable Substrate : CS, GS, SS, Concrete

3.8

Surface Preparation Requirements : Carbon steel: Sa 2½ (ISO 8501-1) steel: Abrasive blast Stainless cleaning to achieve a surface profile using approved non- metallic abrasive media which is suitable to achieve a sharp and angular surface profile.

                                                                               Galvanized

steel: Light brush blasting using nonmetallic abrasive leaving a clean, rough and even pattern.

                                                                               Concrete:  Dry  abrasive  "Brush

Blast” cleaning to NACE No. 4/SSPC-SP 7

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

30 Hours 5 Days 30 Hours

15 Days 15 Days

                      20oC

            12 Hours        5 Days

12 Hours 8 Days 8 Days

                      30°C

9 Hours 4 Days 9 Hours 6 Days 6 Days

                      40oC

4 Hours 3 Days 4 Hours 4 Days 4 Days

                      50°C

3 Hours 2 Days 3 Hours 3 Days 3 Days

                                                            ©Saudi Arabian Oil Company, 2021

Page 280 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B - Tankguard 412 (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray Fluid pressure 2500 psi

: Tip size 0.019 to 0.025 inch

Conventional Spray

: N/A

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

100 %

1.5 Kg/L

Viscosity

(ASTM D562)

: 2000-2500 CPS

Flash Point

(ASTM D93 or D56)

:

100°C

4.5

Approved Color/s

: Black, Green, Red, White

4.6

Finish

: Gloss

Special Instructions: Consult Manufacturer Application Guide

                                                     ©Saudi Arabian Oil Company, 2021

Page 281 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D

Type of Coating

: Modified Amine Cured Epoxy

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Tankguard Storage

SAP M/N (SAMS S/N)

: Primer 1000194354 (09-612-316); Topcoat 1000194357 (09-612-317)

Storage

1.1

Shelf life, sheltered storage @ 23 °C maximum

:

24 months Comp. A 24 months Comp. B

Mixing

2.1

No. of Components 2.1.1 Base : Tankguard Storage Comp A 2.1.2 Hardener (Curing Agent) : Tankguard Storage Comp B

                                          :

2

2.2 Mixing Ratio (by Volume)

: 6.5 part A : 1 part B

2.3

Thinner

SAP M/N (SAMS S/N)

:

:

Jotun Thinner No. 23

1000198458 (09-738-290)

2.4 Minimum-Maximum Thinning Requirements :

0-5%

2.5

Induction Time

2.6

Pot Life

Application

:

:

20 minutes

4 hours @ 23°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

158 microns

100 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 282 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Tankguard Storage (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 25.2 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: CS, Coated Surface, GS, SS, Concrete

3.8

Surface Preparation Requirements Coated surfaces: Clean, dry and

: Carbon steel: Sa 2½

undamaged compatible coating (ISO 12944-4 6.1)

                                                                                                              Stainless steel: Abrasive blast

cleaning to achieve surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.

                                                                                                                Galvanized steel: Light brush

blasting using nonmetallic

                                                                                                                  abrasive leaving a clean,

rough and even pattern. Concrete: Dry abrasive

“Brush Blast” cleaning to NACE No. 4/SSPC-SP 7

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

24 Hours 30 Days

   24 Hours         30 Days       15 Days

                      20oC                      10 Hours         30 Days

   10 Hours         30 Days         9 Days

                      30°C

8 Hours 30 Days

    8 Hours          30 Days         5 Days

                      40oC

4 Hours 30 Days 4 Hours 14 Days 3 Days

                      50°C

4 Hours 30 Days

    4 Hours          14 Days         3 Days

                                                     ©Saudi Arabian Oil Company, 2021

Page 283 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2D - Tankguard Storage (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.017 to 0.021 inch Fluid Pressure 2,100 psi

Conventional Spray

:

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

63±2 %

1.56 Kg/L

50-120 CPS

28°C

4.5

Approved Color/s

: light Grey, Red

4.6

Finish

: matt

Special Instructions: Consult Manufacturer Application Guide.

                                                            ©Saudi Arabian Oil Company, 2021

Page 284 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6

Type of Coating

: Alkyd Based-Primer

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Pilot Primer

SAP M/N (SAMS S/N)

:

1000197976 (09-708-133) or 1000198011 (09-708-137)

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

:

24 Months

Mixing

2.1

No. of Components 2.1.1 Base : Pilot Primer 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Thinner no.2

SAP M/N (SAMS S/N)

:

1000198474 (09-738-340)

2.4 Minimum - Maximum Thinning Requirements : 0 to 5 %

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 40 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

  :

  :

95 microns

50 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 285 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Pilot Primer (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

20.8 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Applicable Substrate

:

CS, Aluminum

3.8

Surface Preparation Requirements :

Carbon steel: Sa 2½ (ISO 8501-1)

                                                                                                            Aluminum: Abrasive blast

cleaning to achieve a surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

20 Hours

N/A

     24 Hours

                      20oC

12 Hours

N/A

     14 Hours

                      30°C

8 Hours

N/A

     12 Hours

                      40oC

4 Hours

N/A

     10 Hours

                      50°C

2 Hours

N/A 5 Hours

• Drying times may change depending on thickness, humidity, airflow etc. Consult manufacturers Technical Data Sheet and Application Guide for further details.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.015 to 0.019inch Fluid Pressure 2,100 psi

Conventional Spray

:

1.1 – 1.9 Atomizing Pressure

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 286 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Pilot Primer (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

52 ±2 %

1.2 to 1.4 kg/l

90 to 94 KU

36 °C

4.5

Approved Color/s

: Grey, red

4.6

Finish

: Matt

Special Instructions: Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 287 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat

Type of Coating

: Alkyd-Based Topcoat: Aluminum Color

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Bengalac Silver Aluminum

SAP M/N (SAMS S/N)

:

1000196402

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

12 Months

Mixing

2.1

No. of Components : 2.1.1 Base : Bengalac Aluminum 2.1.2 Hardener (Curing Agent) : N/A

1

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

:

: Thinner no.2

:

1000198474

2.4 Minimum-Maximum Thinning Requirements :

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 – 40 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 50 %

3.3

Typical Wet Film Thickness Per Coat

  :

60 microns

3.4

Typical Dry Film Thickness Per Coat

  :

25 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 288 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 4 Topcoat - Bengalac Silver Aluminum (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

16.8 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

:

Carbon Steel

3.8

Surface Preparation Requirements

: The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of foam release agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

20 Hours

N/A

    12 Hours

                      20oC

10 Hours

N/A

      8 Hours

                      30°C

8 Hours

N/A

      4 Hours

                      40oC

2 Hours

N/A

      1 Hours

                      50°C

1 Hours

N/A 1 Hours

• Drying times may change depending on thickness, humidity, airflow etc. Consult manufacturers Technical Data Sheet and Application Guide for further details.

                                                    ©Saudi Arabian Oil Company, 2021
  

Page 289 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 4 Topcoat - Bengalac Silver Aluminum (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip size 0.021 to 0.027 inch Fluid Pressure 2,100 psi

:

11-19 (HVLP) 1.1-1.9 mm (Pressure Pot)

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

:

:

:

42±2 %

0.9 – 1.0 kg/l

140-180 cps at 23oC (ISO 2884)

4.4

Flash Point

(ASTM D93 or D56)

:

36 °C

4.5

Approved Color/s

: Aluminum

4.6

Finish

:

Special Instructions: Please Consult Manufacturer.

                                                            ©Saudi Arabian Oil Company, 2021

Page 290 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat

Type of Coating

: High Gloss Enamel Topcoat

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Pilot II

SAP M/N (SAMS S/N)

:

1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495 (09-630-763), 1000195532 (09-630-768), 1000195571 (09-630-769) 1000195577 (09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-773), 1000195650 (09-630-785), 1000195683 (09-630-794) 1000195685 (09-630-796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-631-322), 1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749 (09-631-462), 1000195801 (09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645)

Storage

1.1

Shelf life, sheltered storage @ 23 °C maximum

:

48 Months

Mixing

2.1

No. of Components 2.1.1 Base : Pilot II 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: Single Pack

: Thinner no.2

SAP M/N (SAMS S/N)

:

1000198474 (09-738-340)

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

: N/A

: N/A

                                                     ©Saudi Arabian Oil Company, 2021

Page 291 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS - 6 Topcoat – Pilot II (Cont’d)

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 40 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

100 microns

50 microns

19.2 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

: Coated Surfaces

3.8

Surface Preparation Requirements

: Coated surfaces: Clean, dry and

undamaged compatible coating (ISO 12944-4 6.1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

24 Hours

N/A

    14 Hours

                      20oC

18 Hours

N/A

    10 Hours

                      30°C

14 Hours

N/A

     7 Hours

                      40oC

                      50°C

12 Hours

10 Hours

N/A

N/A

      3 Hours

      2 Hours

• Drying times may change depending on thickness, humidity, airflow etc. Consult manufacturers Technical Data Sheet and Application Guide for further details.

                                                           ©Saudi Arabian Oil Company, 2021
  

Page 292 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS - 6 Topcoat – Pilot II (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.015 to 0.019 inch Fluid Pressure 2,100 psi

Conventional Spray

:

0.38 – 0.51mm

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

48±2%

1.04 kg/L

400-450 cps at 23oC (ISO 2884)

36 °C

Approved Color/s: 1000195487 (09-630-753), 1000195490 (09-630-758), 1000195495(09-630-763), 1000195532 (09-630-768), 1000195571 (09-630-769) 1000195577 (09-630-770), 1000195631 (09-630-771), 1000195637 (09-630-773), 1000195650 (09-630-785), 1000195683 (09-630-794) 1000195685 (09-630-796), 1000195687 (09-630-798), 1000195689 (09-631-301), 1000195742 (09-631-322), 1000195745 (09-631-450), 1000195747 (09-631-455), 1000195749 (09-631-462), 1000195801 (09-631-465), 1000195803 (09-631-590) or 1000195831 (09-631-645) or depending on color

4.6

Finish

: Gloss

Special Instructions: Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 293 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS -11A/11B

Type of Coating

: Silicone Topcoat

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Solvalitt Al

SAP M/N (SAMS S/N)

:

1000196488 (09-687-325)

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : N/A 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: Not Applicable

: Thinner no.7

SAP M/N (SAMS S/N)

:

none

2.4 Minimum-Maximum Thinning Requirements :

0 to 5 % by Volume

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 – 85 %

3.3

Typical Wet Film Thickness Per Coat

  :

70 microns (ALUM.) 60 microns (others)

3.4

Typical Dry Film Thickness Per Coat

  :

25 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 294 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS – 11A/11B Topcoat – Solvalitt Al (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :   14 m2/L (alum)

3.6 Minimum Number of Coats

  :   1

3.7

Applicable Substrate

  :   CS, GS, SS, Aluminum,

etc.)

3.8

Surface Preparation Requirements : Carbon steel: Sa 2½ (ISO 8501-1)

                                                                                                          Stainless steel: Cleanliness and

surface profile corresponding to Sa 2½, Fine G (ISO 8503-2)

                                                                                                           Aluminum: The surface shall be

hand or machine abraded with non-metallic abrasives or bonded fiber machine or hand

                                                                                                                  abrasive pads to impart a

scratch pattern to the surface and to remove all polish from the surface.

                                                                                                            Galvanized steel: Light brush

blasting using nonmetallic abrasive leaving a clean, rough and even pattern.

                                                                                                             Coated surfaces: Clean, dry and

undamaged compatible coating (ISO 12944-4 6.1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

•                  10°C
                   20oC
  

4 Hours             Extended            2 Hours          *                        *

                      30°C                   3.5 Hours

Extended 2 Hours * * 40oC 3 Hours Extended 1.5 Hours * * Extended 1.5 Hours * * 50°C

Extended 3 Hours

3 Hours

5 Hours

  *

*

(Please consult Manufacture’s Technical Data Sheet and Application Guides.)

                                                     ©Saudi Arabian Oil Company, 2021

Page 295 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS – 11A/11B Topcoat – Solvalitt (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip size 0.015 to 0.017 inch Fluid Pressure 1450 psi

: Tip size Atomizing Pressure

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

4.4 4.5 4.6

Flash Point Approved Color/s Finish

(ASTM D93 or D56) : Aluminum (Al) : matt

:

:

:

:

40+/-2% (Alum) 43+/-2% (others)

0.9 to 1.2 kg/L (alum.) 1.1 to 1.3 kg/l (others)

100 to 150 cps (alum) 220 to 300 cps (others)

26 °C

Special Instructions: Consult Manufacturer Application Guide.

                                                            ©Saudi Arabian Oil Company, 2021

Page 296 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS – 20A

Type of Coating

: Modified Amine Cured Epoxy

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Tankguard Storage

SAP M/N (SAMS S/N)

: Primer 1000194354 (09-612-316); Topcoat 1000194357 (09-612-317)

Storage

1.1

Shelf life, sheltered storage @ 23 °C maximum

:

24 months Comp. A 24 months Comp. B

Mixing

2.1

No. of Components 2.1.1 Base : Tankguard Storage Comp A Tankguard Storage Comp B 2.1.2 Hardener (Curing Agent) :

                                          :

2

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 6.5 : 1

:

:

Jotun Thinner No. 23

1000198458 (09-738-290)

2.4 Minimum-Maximum Thinning Requirements :

0-5%

2.5

Induction Time

2.6

Pot Life

Application

:

:

20 minutes

4 hours @ 23°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 60 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

158 microns

100 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 297 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Tankguard Storage (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 25.2 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: CS, Coated Surface, GS, SS, Concrete

3.8

Surface Preparation Requirements

: Carbon steel: Sa 2½ (ISO 8501-

                                                                                    Coated surfaces: Clean, dry and

1)

undamaged compatible coating (ISO 12944-4 6.1)

                                                                                                              Stainless steel: Abrasive blast

cleaning to achieve surface profile using approved nonmetallic abrasive media which is suitable to achieve a sharp and angular surface profile.

                                                                                                                Galvanized steel: Light brush

blasting using nonmetallic

                                                                                                                     abrasive

leaving a clean,

                                                                                                                 Concrete: Dry abrasive "Brush

Blast” cleaning to NACE No. 4/SSPC-SP 7

rough and even pattern.

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

24 Hours 30 Days

   24 Hours         30 Days         15 Days

                      20oC                     10 Hours         30 Days

   10 Hours         30 Days         9 Days

                      30°C

8 Hours 30 Days

   8 Hours          30 Days         5 Days

                      40oC

4 Hours 30 Days 4 Hours 14 Days 3 Days

                      50°C

4 Hours 30 Days

    4 Hours          14 Days         3 Days

                                                            ©Saudi Arabian Oil Company, 2021

Page 298 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A - Tankguard Storage (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.017 to 0.021 inch Fluid Pressure 2,100 psi

Conventional Spray

:

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

63±2 %

1.56 Kg/L

50-120 CPS

28°C

4.5

Approved Color/s

: light Grey, Red

4.6

Finish

: matt

Special Instructions: Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 299 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A

Type of Coating

: High Solid Epoxy

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name : Chemtech GM CLEAR

SAP M/N (SAMS S/N)

: NONE

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : Chemtech GM Comp A. 2.1.2 Hardener (Curing Agent) : Chemtech GM Comp B.

                                          :

2

2.2 Mixing Ratio

2.3

Thinner

: 2.5 :1 by volume

:

Jotun Thinner no.17

SAP M/N (SAMS S/N)

: NONE

2.4 Minimum-Maximum Thinning Requirements : According to TEMP.

2.5

Induction Time

: N/A

2.6

Pot Life

Application

:

30 Minutes @23°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 40°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 – 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

1,650 microns

1,650 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 300 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 20A – Chemtech GM Clear (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

not applicable

3.6 Minimum Number of Coats

  :             2

3.7

Applicable Substrate

   :

Carbon Steel

3.8

Surface Preparation Requirements:

   Cleanliness and surface

profile corresponding to Sa 2½, Medium to Coarse G (ISO 8503-2)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

26 Hours

2 Days

  26 Hours

---

    14 Days

                      20oC

14 Hours 2 Days 14 Hours ----- 8 Days

                      30°C

10 Hours 20 Hours 10 Hours ----- 6 Days

                      40oC

7 Hours

16 Hours

   7 Hours

---

     3 Days

                      50°C

5 Hours 12 Hours 5 Hours ----- 2 Days

3.10 Recommended Application

Airless (A/L) Spray

: Minimum 64:1 Pump Ratio Tip size 0.025-0.031 inch Fluid Pressure 2900 psi

Conventional Spray

: N/A

Brush

: For stripe coating / touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 301 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 20A – Chemtech GM Clear (Cont’d)

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

100 %

0.8 kg/L

Viscosity

(ASTM D562) : Viscosity Comp A (ISO-2884) : 2000-2750 CPS

                                                                             Viscosity Comp B (ISO-2884) : 250-350 CPS

4.4

Flash Point

(ASTM D93 or D56)

: Non flammable

4.5

Approved Color/s

: Clear, White

4.6

Finish

: Gloss

Special Instructions: Consult Manufacturer Application Guide.

                                                            ©Saudi Arabian Oil Company, 2021

Page 302 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A/26/26T Primer

Type of Coating

: Epoxy: Damp-Tolerant

Manufacturer

:

Jotun Saudia Company Ltd.

Product Name :

Jotamastic 80

SAP M/N (SAMS S/N)

:

1000194560 (09-612-352) or 1000195239 (09-612-459)

Storage

1.1

Shelf life, sheltered storage @ 23°C maximum

:

48 months

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 Jotamastic 80 Comp. A Jotamastic 80 Comp. B

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 7:1 by volume

:

:

Jotun Thinner no.17

1000198471 (09-738-300)

2.4 Minimum-Maximum Thinning Requirements :

0 to 10 % by Volume

2.5

Induction Time

2.6

Pot Life

Application

:

:

10 minutes @ 23 0C

2 hours @25°C 1 hour @40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 60°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

10 - 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

188 microns

150 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 303 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A/26/26T Primer – Jotamastic 80 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

32 m2/L

3.6 Minimum Number of Coats

  :

1-2

3.7

Applicable Substrate

:

CS, Coated Surfaces

3.8

Surface Preparation Requirements : Carbon steel: Sa 2 (ISO 8501-1) Shop Primed steel: Sa 2 (ISO 8501-1)

                                                                                          Coated surfaces: Clean, dry, and undamaged

compatible coating (ISO 12944-4 6.1)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

1 Day 90 Days

    1 Day

14 Days         14 Days

                      20oC

12 Hours 90 Days 12 Hours 9 Days 9 Days

                      30°C

7 Hours 70 Days 7 Hours 4 Days 4 Days

                      40oC

4 Hours 60 Days 4 Hours 2 Days 2 Days

                      50°C

3 Hours 60 Days 3 Hours 2 Days 2 Days

(Please consult Manufacturer’s Technical Data Sheet and Application Guides.)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.019 to 0.025 inch Fluid Pressure 2,100 psi

Conventional Spray

: Not Recommended

Brush

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 304 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A/26/26T Primer – Jotamastic 80 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

4.5

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

78 to 82 %

1.50 kg/L

120 to 126 KU

35 °C

Approved Color/s: Aluminum, Aluminum red toned, Grey, Red, Green, Off-white, Black

4.6

Finish : Semi-Gloss

Special Instructions: Consult Manufacturer Application Guide.

                                                     ©Saudi Arabian Oil Company, 2021

Page 305 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

m. Mascoat – Approved Products

                            APCS-5A and APCS-5B

Mascoat Industrial - DTI

                                                            ©Saudi Arabian Oil Company, 2021

Page 306 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-5A/5B

Type of Coating

: Thermal Insulation Coating

Manufacturer

: Mascoat

Product Name : Mascoat Industrial - DTI

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum : 18 months from manufacture date

Mixing

2.1

No. of Components 2.1.1 Base : Acrylic w/ insulation particulate 2.1.2 Hardener (Curing Agent) : None

                                         :   One, Water Based

        2.2

Mixing Ratio

2.3

Thinner :

SAP M/N (SAMS S/N)

: N/A

: Not required :

2.4 Minimum-Maximum Thinning Requirements : None. Already premixed

2.5

Induction Time

: None. Single component

2.6

Pot Life

: None. Single component

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 15°C (min.), 150°C (max.)

3.2 Minimum-Maximum Allowable Relative Humidity

: Less than 95%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  : 500-600 micon

Typical Dry Film Thickness Per Coat

  : 400-500 micron

Theoretical Coverage @ 25 Micrometers (DFT)

  : 2.6 m2/liter at 250 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 307 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

Mascoat Industrial - DTI - APCS- 5A/5B (Cont’d)

3.6 Minimum Number of Coats

: 1-15, each coat is 500 microns

3.7

Applicable Substrate

: Primed ferrous, non-primed non-

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

                  Substrate                       Recoat Interval
               Temperature

Minimum Maximum

ferrous

: Primed ferrous, non primed non ferrous. Surfarces should be dry and free of any debris. Consult Mascoat application instructions or more detail.

        To Handle     To Service      Full Cure

   (Hours)

                      10°C

4 hours

no max

10 hours

48 hours

72

                      20oC

3 hours

no max

8 hours

36 hours

                      30°C

2 hours

no max

6 hours

24 hours

                      40oC

                      50°C

1 hour

45 min

no max

no max

5 hours

18 hours

4 hours

12 hours

50

48

36

24

It is recommend to add heat slowly when putting units from ambient to service. * Applications can be applied to hot surfaces up to 150C. This will expedite dry and

cure times. Please consult Mascoat for hot application instrtuctions. Heating surface will help to evacuate residual water from coating. If application is sprayed to working equipment (60C or above), recoat time can be reduced and equipment service is immediate.

3.10 Recommended Application Equipment

Airless (A/L) Spray

                       Conventional Spray

: Airless capable of 1 GPM @ 3000 PSI – Graco pneumatic or gas powered or similar

: Do not use. Product is not

designed for this conventional spray method as it will not convey insulation particulates properly.

                                                            ©Saudi Arabian Oil Company, 2021

Page 308 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

Mascoat Industrial - DTI - APCS- 5A/5B (Cont’d)

                  Brush

4.

Physical Properties

: Only for small touchup. Not recommended for large appllications

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

78-80%

0.6-0.61 kg/liter liquid format 5.0 lbs/gallon liquid format

Viscosity

(ASTM D562)

:

20-30k cP

Flash Point

(ASTM D93 or D56)

: None. Product is water based

4.5

Approved Color/s

: Signal White (9003) Light Grey (7047) Traffic Black (9017)

4.6

Finish

: Flat

5. Special Instructions:

This coating is designed to reduce surface temperatures and retain heat for energy retention. The product is typically applied in multi coat process and can be sprayed at ambient or on working surfaces.

This coating has passed NACE/ISO criteria for Personnel Protection (5 Ssecond Skin Exposure) purposes to lower surfaces temperatures to acceptable levels as defined by ASTM 1055/1057 and tested to NACE TM21423-2017 for temperatures up to 175C.

For detail of thickness of coating recommendation please consult Mascoat for Energy Retention and Personnel Protection.

Mascoat can also provide a list of compatible primers based on testing performed by Mascoat.

                                                     ©Saudi Arabian Oil Company, 2021

Page 309 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

n. Sakaphen – Approved Products

                   APCS-2G

Sakaflake 900

Vinyl-Ester

                                                            ©Saudi Arabian Oil Company, 2021

Page 310 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G

Type of Coating

:

Novolac Epoxy Vinyl Ester, Glass Flake-Filled electrically conductive for flammable liquids

Manufacturer

: SÄKAPHEN® GmbH

Product Name : SÄKAPHEN® SÄKAFLAKE® 900

SAP M/N (SAMS S/N)

:

1000709300

Storage

1.1

Shelf life, sheltered storage @ 20°C maximum

:

6 months

Mixing

2.1

                                          :

No. of Components 2.1.1 Base : SF900 Black 3K, Comp. A 2.1.2 Hardener (Curing Agent) : SF900 Comp. B : SF900 Comp. C 2.1.3 Accelerator

3

        2.2

Mixing Ratio

Accelerator)

: 100 : 2 : 2 : (Base

Hardener

:

For mixing, make sure to follow latest application guideline by manufacturer

2.3

Thinner

: DO NOT THIN

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: N/A

2.6

Pot Life

Application

:

60 minutes@ 23°C (can be adjusted to ambient conditions)

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 45°C

3.2 Minimum-Maximum Allowable Relative Humidity

: Min= 20% Max = 80%

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

:

:

700 microns up to 1200 microns

600 - 1000 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 311 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS – 2G SÄKAPHEN® SÄKAFLAKE® 900 (Black 3K) (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness Theoretical Coverage @ 1000 Micrometers Dry Film Thickness

  :

  :

33,00 m2/L

0,80 m2/L

3.6 Minimum Number of Coats

   : 1

3.7 Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: Carbon Steel, Stainless Steel, Cast Iron/Steel Concrete with appropriate primer

: SA 2½ -Sa 3 80-100 microns surface profile

                Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full cure

                      10°C
                      20oC
                      30°C
                      50°C

 16h
 12h
   6h
   3h

48h* 24h* 24h* 12h*

       3 days
       1 day
       0,5 day
       0,5 day

   8 days            8 days
   7 days            7 days
   4 days            4 days
   4 days            4 days

• Overcoatable maximum to the point where whipping the surface with styrene will cause temporary tackiness. Given hours are for orientation. During application and during curing proper ventilation is mandatory. Otherwise curing is slowed down or hindered. This applies in particular for vessels with top only access and no bottom outlet. Curing may be accelerate by force cure with hot air after final layer is touch try.

3.10 Recommended Application Equipment

Airless (A/L) Spray : Pump Ratio min. 66:1 with max 500bar / 7000psi pressure corresponding to pump with appropriate pressure rating Gun 3/8” - 1/2” I.D. Fluid Hose .027” - .031” Tip Orifice 40 degrees Fan Width Filters must be removed Filter Screen

                       Conventional Spray
                       Brush

: N/A : For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 312 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS – 2G SÄKAPHEN® SÄKAFLAKE® 900 (Black 3K) (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(DIN EN ISO 3251)

Product Weight

(DIN 53217-1)

Viscosity

(EN ISO 2431/DIN EN 535)

Flash Point

(DIN 53213)

:

:

:

:

76-80%

1,250 Kg/L

7000-8000 mPas

33°C

4.5

Approved Color/s

: Anthracite

4.6

Finish

: Matt rough

 Special Instructions:

As the coating is electrically conductive, high voltage spark testing is not applicable for pore testing. After application, the coating has to be thoroughly visually inspected for any imperfection.

                                                     ©Saudi Arabian Oil Company, 2021

Page 313 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

o. Sherwin Williams – Approved Products

                   APCS-1A

Zinc Clad II Ethyl Silicate

Inorganic Zinc Primer: Solvent Based

Inorganic Zinc Rich Coating

Macropoxy 646

Epoxy Topcoat

                   APCS-1B

Macropoxy 646

Epoxy Primer and Topcoat

                   APCS-1C

Zinc Clad IV Organic Zinc Rich

Zinc-Rich Epoxy Primer

Epoxy Primer

Use Epoxy Topcoat of APCS-1A as topcoat

                   APCS-1D

Use APCS-1A as primer and intermediate coat Acrolon 890

Polyurethane Topcoat

                   APCS-1E

Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

                   APCS-1F

Use APCS-1C as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

                   APCS-2A/2C/2D

Phenicon HS

                   APCS-2E

Epoxy Novolac Phenolic

Nova-Plate UHS

Epoxy Novolac

                   APCS-2G

Cor-Cote VEN FF

Vinyl-Ester

                   APCS-3

Targuard Coal Tar Epoxy

Coal Tar Epoxy

                                                            ©Saudi Arabian Oil Company, 2021

Page 314 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

          Sherwin Williams – Approved Products (Cont.)

                   APCS-4

Kem Kromik Universal Metal Primer Industrial Aluminum Paint

Alkyd Primer

Alkyd Enamel Topcoat

                   APCS-6

Use Alkyd Primer of APCS-4 as primer Industrial Enamel

Alkyd Enamel Topcoat

                   APCS-11A

Use primer of APCS-1A as primer Heat-Flex M505

Heat Resistant Topcoat

                   APCS-11B

Heat-Flex M505

Heat Resistant Coating, Self-Priming

                   APCS-11C

Heat-Flex Hi-Temp 1200

Heat Resistant Self-Priming System

                   APCS-12

Use APCS-1B as primer and topcoat

                  APCS-17A

Use primer of APCS-1A

                 APCS-19C

Euronavy PE 35*

Solvent-Free Epoxy

                 APCS-20A

Dura-Plate UHS

                  APCS-20B

Dura-Plate UHS

Fiberglass Reinforced Epoxy: Hand Lay-Up

Fiberglass Reinforced Epoxy: Spray-Applied

                  APCS-22A

Euronavy ES301*

Solvent-Free Epoxy

                  APCS-22B

Euronavy PE 35*

Solvent-Free Epoxy

                 APCS-26

Macropoxy 646

Epoxy Mastic

                                                     ©Saudi Arabian Oil Company, 2021

Page 315 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

        Sherwin Williams – Approved Products (Cont.)

                 APCS-26T

Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

*Refer to coating manufacturer’s Product Data Sheet for Euronavy PE 35, Euronavy ES301.

                                                            ©Saudi Arabian Oil Company, 2021

Page 316 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A

Type of Coating

:

Inorganic Ethyl Silicate Zinc-Rich

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Zinc Clad II Ethyl Silicate

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Part E: 9 months Part F: 24 months

Mixing

2.1

No. of Components 2.1.1 Base : B69V3 2.1.2 Hardener (Curing Agent) : B69D11

                                          :

2

2.2 Mixing Ratio

2.3

Thinner

: 14.2L : 33.1kg

: Reducer #58 (R7K58) or Reducer #100 (R2K5)

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : Up to 10% by Volume

2.5

Induction Time

: N/A

2.6

Pot Life

:

6.5 hours @ 35°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

40-90%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

125 microns

75 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 317 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Zinc Clad II Ethyl Silicate (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

24.3m2/L

3.6 Minimum Number of Coats

  :

1 coat

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

:

:

Steel

Sa 2.5

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

48 hours

30 hours

18 hours

18 hours

18 hours

   3 hours

   2 hours

   1 hour

   20 mins

   10 mins

3.10 Recommended Application Equipment

7 days

7 days

7 days

7 days

7 days

Airless (A/L) Spray

Conventional Spray

: Pressure: 1800 - 2000psi Hose: 3/8” ID

Tip: .017” - .021”

: Gun: Binks 95

Fluid Nozzle: 66 Air Nozzle: 63PB Atomization Pressure: 30 - 40 psi

Fluid Pressure: 10 - 20 psi

Brush

: For touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 318 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A - Zinc Clad II Ethyl Silicate (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

62±2%

2.5 Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

13°C

4.5

Approved Color/s

: Grey-green

4.6

Finish

: Flat

Special Instructions:

                                                     ©Saudi Arabian Oil Company, 2021

Page 319 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F/26

Type of Coating

: Epoxy Polyamide

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Macropoxy 646

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components 2.1.1 Base : M646B 2.1.2 Hardener (Curing Agent) : M646A

                                          :

2

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 1 : 1 by volume

: C50

:

2.4 Minimum-Maximum Thinning Requirements : Up to 10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

:

:

20 mins @ 35°C

2 hours @ 35°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C min, 49°C max

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

175 microns

125 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 320 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F/26 - Macropoxy 646 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 29 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: Steel, concrete, Aluminum,

galvanizing metal

: Steel: Sa2.5, Concrete: smooth, Aluminum & Galvanizing: SSPC-SP1

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

20 hours

1 year

  20 hours

10 days

                      20oC

10 hours

1 year

  10 hours

7 days

                      30°C

6 hours

1 year

    6 hours

7 days

                      40oC

                      50°C

4 hours

2 hours

1 year

    4 hours

4 days

1 year

    2 hours

4 days

3.10 Recommended Application

Airless (A/L) Spray

: Pump: 30:1

Pressure: 2,800 – 3,000 psi

Hose: 1/4” ID

Tip: .017” - .023” Filter: 60 mesh

                                                     ©Saudi Arabian Oil Company, 2021

Page 321 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F/26 - Macropoxy 646 (Cont’d)

Conventional Spray

: Gun: DeVilbiss MBC-510

Fluid Tip: E Air Nozzle: 704 Atomization Pressure: 60-65 psi

Fluid Pressure: 10-20 psi Requires oil and moisture separators

Brush

: Nylon/Polyester or Natural Bristle

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

72±2%

1.55 Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

33°C

4.5

Approved Color/s

: White & Range of colors

4.6

Finish

: Semi-gloss

Special Instructions:

                                                            ©Saudi Arabian Oil Company, 2021

Page 322 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F

Type of Coating

: Organic Zinc Rich Epoxy Primer

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Zinc Clad IV

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 18 months

Mixing

2.1

No. of Components 2.1.1 Base : B69A8 2.1.2 Hardener (Curing Agent) : B69V8

                                           :  2

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 8 : 1

: MEK

:

2.4 Minimum-Maximum Thinning Requirements : Up to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

:

:

20 mins @ 35°C

4.5 hours @ 35°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

125 microns

75 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 323 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 1C/1F : Zinc Clad IV (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

25.8m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

:

:

Steel

Minimum Sa 2

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

5.5 hours

N/A

    80 mins

    10 days

                      20oC

4.5 hours

N/A

      1 hour

    10 days

                      30°C

3.5 hours

N/A

    55 mins

     10 days

                      40oC

                      50°C

2 hours

1 hour

N/A

N/A

     45 mins

  7-10 days

     30 mins

        7 days

3.10 Recommended Application

Airless (A/L) Spray:

Conventional Spray:

2000-2300 psi, .019” tip, 3/8” ID hose

Binks 95, 50 psi air pressure

Brush: Use natural bristle brush

For stripe coating / touch-up only,

                                                            ©Saudi Arabian Oil Company, 2021

Page 324 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 1C/1F - Zinc Clad IV (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

68±2%

3.17 Kg/L

115 Ku

27°C

4.5

Approved Color/s

: Grey-green

4.6

Finish

: Flat

Special Instructions:

                                                     ©Saudi Arabian Oil Company, 2021

Page 325 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat

Type of Coating

: Acrylic Polyurethane

Manufacturer

: Sherwin Williams

Product Name : Acrolon 890

SAP M/N (SAMS S/N)

:

Storage

1.1

: Part A 18 months Part B 6 months

Shelf life, sheltered storage @ 35°C maximum

Mixing

2.1

No. of Components 2.1.1 Base : B65WC0001 2.1.2 Hardener (Curing Agent) : B65VC0001

                                         :

2

2.2 Mixing Ratio

2.3

Thinner

: 10 : 1 by Vol

: R06K00010

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: Not recommended

:

1.5 hours 35°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 43°C

3.2 Minimum-Maximum Allowable Relative Humidity

: 85% Max

3.3

3.4

Typical Wet Film Thickness Per Coat

  :

74 – 147 microns

Typical Dry Film Thickness Per Coat

  :       50 -100 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 326 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat – Acrolon 890 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 13.6 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: Prepared metal or masonry

substrates

3.8

Surface Preparation Requirements

: Minimum recommended

surface preparation:* Iron & Steel: SSPC-SP6/ NACE 3/ Sa 2(ISO 8501-1:2007), 25-50 microns profile* Galvanizing: SSPC-SP1* Concrete/Masonry: SSPC- SP13 / NACE 6Primer required

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

10hr

6hr

3hr

1.5hr

0.5hr

3 months

  10hr

10hr

       14 days

3 months

   6hr

3 months

   3hr

6hr

3hr

3 months

 1.5hr

1.5hr

3 months 0.5hr

0.5hr

9 days

6 days

4 days

2 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Pump 45:1 min

Pressure 15 Mpa min

Hose 9.5 mm ID

Tip 0.013” - 0.017”(0.33-0.43 mm) Filter: none

                                                     ©Saudi Arabian Oil Company, 2021

Page 327 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat – Acrolon 890 (Cont’d)

Conventional Spray

Brush

Physical Properties

: Gun Binks 95

Fluid Nozzle 66 Air Nozzle 68 PB Atomization Pressure 0.5 Mpa

Fluid Pressure 0.2 Mpa

: Nylon/Polyester Natural Bristle

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

:

68%±2%

Product Weight

(ASTM D1475)

: 1.431 Kg/L

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

75 -90 Ku

28°C

4.5

Approved Color/s

: Full range

4.6

Finish

: Glossy

Special Instructions:

                                                            ©Saudi Arabian Oil Company, 2021

Page 328 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C/2D

Type of Coating

: Epoxy Novolac Phenolic Coating

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Phenicon HS

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components : 2.1.1 Base : 920WA11 (Off White) 920A175 (Light Grey) 920L175 (Blue OAP) 700C685

2.1.2 Hardener (Curing Agent) :

2

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 4 : 1 by volume

: N/A

:

2.4 Minimum-Maximum Thinning Requirements : Not recommended

2.5

Induction Time

2.6

Pot Life

Application

: None @ 35°C

:

1 hour @ 35°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

13°C min, 49°C max

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

175 microns

125 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 329 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C/2D – Phenicon HS (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 29.4m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: Steel, concrete

3.8

Surface Preparation Requirements

: Steel: Sa 2.5, Concrete: NACE 6

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

48 hours

30 days

   48 hours

14 days

                      20oC

24 hours

30 days

   24 hours

10 days

                      30°C

12 hours

30 days

   12 hours

6 days

                      40oC

                      50°C

8 hours

4 hours

30 days

   8 hours

4 days

30 days

   4 hours

3 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush

: Pressure: 3000 psi minimum Hose: 3/8” - 1/2” ID Tip: .017” - .021” Filter: 60 mesh

: Gun: Binks 95

Tip and Needle: 66/65

Air Cap: 65 PR Atomization Pressure: 65-75 psi

Fluid Pressure: 15-20 psi

: Nylon/polyester or natural bristle

                                                            ©Saudi Arabian Oil Company, 2021

Page 330 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C/2D – Phenicon HS (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

75±2%

1.5 Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

27°C

4.5

Approved Color/s

: Off White, Light Grey, Light Blue

4.6

Finish

: Semi-Gloss

Special Instructions:

                                                     ©Saudi Arabian Oil Company, 2021

Page 331 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2E

Type of Coating

: Epoxy Novolac Amine

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Nova-Plate UHS

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : B62-220 2.1.2 Hardener (Curing Agent) : B62V221

                                         :

2

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 4 : 1 by volume

: N/A

:

2.4 Minimum-Maximum Thinning Requirements : Not recommended

2.5

Induction Time

: N/A

2.6

Pot Life

:

10 minutes @ 35°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C min, 43°C max

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

200 microns

200 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 332 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2E – Nova-Plate UHS (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

38.4 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

3.8

3.9

Surface Preparation Requirements

Drying Time at specified DFT

:

:

Steel

Sa 2.5

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

40 hours

21 days

   40 hours

8 days

                      20oC

24 hours

21 days

   24 hours

6 days

                      30°C

10 hours

18 days

   10 hours

4 days

                      40oC

6 hours

14 days 6 hours

4 days

                      50°C

2 hours

7 days

   2 hours

4 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Unit: 68:1 Pump, minimum

Pressure: 6000 psi

Hose: 3/8” ID

Tip: .019” - .021” Filter: 30 mesh

Conventional Spray

: N/A

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

98±2%

1.34 Kg/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 333 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2E – Nova-Plate UHS (Cont’d)

4.3

4.4

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

110°C

4.5

Approved Color/s

: Light Grey, White, Green

4.6

Finish

: Gloss

Special Instructions:

                                                            ©Saudi Arabian Oil Company, 2021

Page 334 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G

Type of Coating

: Flake Filled Vinyl Ester Novolac

Manufacturer

: Sherwin Williams

Product Name : Cor-Cote VEN FF

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 month

Mixing

2.1

No. of Components 2.1.1 Base : B88-25 2.1.2 Hardener (Curing Agent) : B88R99/B88V99

                                          :

2 (3 top coat)

2.2 Mixing Ratio

: See Below.

Premix Part A component separately, using a low-speed drill and Jiffy Blade model ES mixer. Make certain no pigment or glass flake remains on the bottom or sides of the can. Use CHP Cumene Hydrogen Peroxide catalyst at the rate of 2.0 - 4.0 fluid oz. per gallon of Part A, depending on environmental conditions.

Mix with low-speed drill and Jiffy Blade model ES mixer for three minutes and until uniform. For topcoat only: Add 970-C-949 Wax Solution at the rate of 3 – 4 oz per gallon of Part A to obtain a completely tack free surface.

Add wax solution before adding catalyst. If wax solution is cloudy, it will clear with gentle warming. DO NOT USE FLAME TO HEAT THE WAX SOLUTION.

2.3

Thinner

: Not recommended

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

: None required

                                                     ©Saudi Arabian Oil Company, 2021

Page 335 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Cor-Cote VEN FF (Cont.)

2.6

Pot Life

:

25-45 minutes

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C to 32°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% Max

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

  :            500 – 625 microns

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

375 – 500 microns

39.2 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

:

:

Concrete and Steel

See Below.

Minimum recommended surface preparation:

Iron & Steel: Atmospheric: SSPC-SP6/NACE 3, 2 mil (50 micron) profile Immersion: SSPC-SP10/NACE 2, 2-3 mil (50-75 micron) profile

Concrete & Masonry: Atmospheric: SSPC-SP13/NACE 6, or ICRI No. 310.2, CSP 3-5 Immersion: SSPC-SP13/NACE 6-4.3.1 or 4.3.2, or ICRI No. 310.2, CSP 3-5

3.9

Drying Time at specified DFT 500 microns

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C                    12 hrs

4 days

16 hrs 16 hrs

48 hrs

                      20oC

                      30°C

3 hrs

2 hrs

72 hrs

6 hrs

6 hrs

24 hrs

48 hrs

3 hrs

3 hrs

16 hrs

                                                            ©Saudi Arabian Oil Company, 2021

Page 336 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2G - Cor-Cote VEN FF (Cont.)

                      40oC

                      50°C

1 hr

0.5 hr

24 hrs

1.5 hrs

1.5 hrs

8 hrs

12 hrs

0.75 hrs

0.75 hrs

4 hrs

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Catalyst Injection Spray: Pump…Catalyst injection (external mixing) Pump Ratio …30:1 with catalyst pump Gun …Polycraft or equivalent Fluid Hose …3/8” - 1/2” I.D. Tip Orifice …036” - .045” Fan Width…40 degrees Fluid Pressure …2000 - 3000 psi Filter Screen…Filters must be removed

Conventional Spray

: N/A

Brush

: Natural bristle small areas

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

100%

2,000 cps

27°C

4.5

Approved Color/s

: Haze Gray, Tile Red

4.6

Finish

: Matte

Special Instructions:

                                                     ©Saudi Arabian Oil Company, 2021

Page 337 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3

Type of Coating

: Polyamide Epoxy Coal Tar Coating

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Targuard Coal Tar Epoxy

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: Part A: 8 months unopened Part B: 36 months unopened

Mixing

2.1

No. of Components 2.1.1 Base : B69B60 (Black)

                                          :

2

B69R60 (Red)

2.1.2 Hardener (Curing Agent) : B69V60

2.2 Mixing Ratio

2.3

Thinner

: 4 : 1

: Xylene, R2K4

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : Up to 10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None @ 35°C

:

1 hour @ 35°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C to 38°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

90% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

275 microns

200 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 338 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3 - Targuard Coal Tar Epoxy (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

29 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Applicable Substrate

: Concrete, steel, Aluminum,

Galvanized metal

3.8

Surface Preparation Requirements

: Sa 2.5

(Include items 3.7 and 3.8 ONLY for Primer or First Coat of the APCS)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

48 hours

72 hours

    72 hours

   7-10 days

                      20oC

28 hours

72 hours

    72 hours

   7-10 days

                      30°C

13 hours

48 hours

    48 hours

                      40oC

5 hours

12 hours

     12 hours

                      50°C

2.5 hours

8 hours

     8 hours

7 days

2 days

1 day

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Pressure: 3000 psi Hose: 3/8” - 1/2” ID Tip: .017” - .025”

: Gun: Binks 95

Fluid Nozzle: 66 Air Nozzle: 63PB Atomization Pressure: 60 psi

Fluid Pressure: 40 psi

                                                     ©Saudi Arabian Oil Company, 2021

Page 339 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3 - Targuard Coal Tar Epoxy (Cont’d)

Brush use natural bristle brush

: For stripe coating / touch-up only,

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

74±2%

1.3Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

28°C

4.5

Approved Color/s

: Black, Red

4.6

Finish

: Semi-gloss

Special Instructions:

                                                            ©Saudi Arabian Oil Company, 2021

Page 340 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer

Type of Coating

: Modified Phenolic Alkyd Primer

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Kem Kromik Universal Metal Primer

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components 2.1.1 Base : B50WZ1 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Not recommended

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : Not recommended

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C min, 49°C max

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

150 microns

75 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 341 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer - Kem Kromik Universal Metal Primer (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

20.8m2/L

3.6 Minimum Number of Coats

  :

1

3.7

3.8

3.9

Applicable Substrate

Surface Preparation Requirements

Drying Time at specified DFT

:

:

Steel

Sa 2

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

2 hours 20oC 1.5 hours 55 mins 30°C 40oC 45 mins 30 mins 50°C

     2 hours
  1.5 hours
   45 mins
   25 mins
   15 mins

7 days 7 days 7 days 7 days 7 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush

: Pressure: 1800-3000 psi Hose: 1/4” ID

Tip: .015” - .019” Filter: 60 mesh

: Gun: Binks 95

Fluid Nozzle: 63C Air Nozzle: 63PB Atomization Pressure: 50 psi Fluid Pressure: 15-20 psi

: For small areas and touch-up

                                                            ©Saudi Arabian Oil Company, 2021

Page 342 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 - Kem Kromik Universal Metal Primer (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

53±2%

1.5 Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

27°C

4.5

Approved Color/s

: Red Oxide, Off White, Grey

4.6

Finish

: Flat

Special Instructions:

                                                     ©Saudi Arabian Oil Company, 2021

Page 343 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat

Type of Coating

: One-package, Interior / Exterior, General Purpose,

Leafing Aluminum Paint

Manufacturer

: Sherwin Williams

Product Name :

Industrial Aluminum Paint

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months

Mixing

2.1

No. of Components 2.1.1 Base : B59S4 2.1.2 Hardener (Curing Agent) : N/A

                                          :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Not recommended.

Clean Up Mineral Spirits, R1K4

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 49 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% Max

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

75 microns

25 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 344 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat – Industrial Aluminum Paint (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :    15.7 m2/L

3.6 Minimum Number of Coats

  :    2

3.7

Applicable Substrate

3.8

Surface Preparation Requirements:

: Iron Steel Aluminum Galvanizing Concrete Block & Masonry

Iron & Steel: SSPC-SP10, 1 mil profile >200°F (93°C) SSPC-SP6, 1 mil profile <200 °F (93°C)

• Aluminum: SSPC-SP1
• Galvanizing: SSPC-SP1
• Concrete Block & Masonry: SSPC-SP13/

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

24hrs

18hrs

10hrs

6hrs

3hrs

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

      24hrs

24hrs

   10 days

    4-6hrs

24hrs

     7 days

      3hrs

24hrs

     5 days

       2hrs

24hrs

     3 days

       1hr

24hrs

     2 days

Pressure…2000 psi Hose…1/4” ID Tip …010”-.012” Filter …60 mesh

Gun …Binks 95 Fluid Nozzle …63C Air Nozzle…63PB Atomization Pressure …50 psi Fluid Pressure …20 psi

                                                     ©Saudi Arabian Oil Company, 2021

Page 345 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat – Industrial Aluminum Paint (Cont’d)

Brush

: For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

40% ± 2%

9 Kg/L

33°C

4.5

Approved Color/s

: Aluminum

4.6

Finish

: Aluminum Sheen

Special Instructions:

Lightly stir before use. Do not shake with mechanical shaker or overly agitate, as a dull, non-uniform, mottled appearance will result.

                                                            ©Saudi Arabian Oil Company, 2021

Page 346 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat

Type of Coating

: Medium Oil/Alkyd Enamel Finish

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name :

Industrial Enamel

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

3 years

Mixing

2.1

No. of Components 2.1.1 Base : B54 series 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Not recommended

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : Not recommended

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C min, 49°C max

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

115 microns

50 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 347 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat – Industrial Enamel (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 16.9 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: Existing primer

3.8

Surface Preparation Requirements

: Clean, dry and free from surface

contaminants

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

12 hours

   12 hours

                      20oC

                      30°C

                      40oC

                      50°C

9 hours

7 hours

3 hours

1 hour

   9 hours

   7 hours

   3 hours

   1 hour

7 days

7 days

6 days

3 days

2 days

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

Brush

: Pressure: 2500 psi Hose: 1/4” ID Tip: .015” Filter: 100 mesh

: Gun : Binks 95

Fluid Nozzle: 66 Air Nozzle: 63PB Atomization Pressure: 50 psi Fluid Pressure: 20-25 psi

: For small areas and touch-up

                                                            ©Saudi Arabian Oil Company, 2021

Page 348 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat – Industrial Enamel (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

43±2%

1.06 Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

38°C

4.5

Approved Color/s

: Full range including safety colors

4.6

Finish

: Glossy

Special Instructions:

                                                     ©Saudi Arabian Oil Company, 2021

Page 349 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B

Type of Coating

: Silicone-Based Heat Resistant Finish

Manufacturer

: Sherwin Williams Protective & Marine Coatings

Product Name : Heat-Flex M505

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : Heat-Flex M505 2.1.2 Hardener (Curing Agent) : N/A

                                         :

1

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: N/A

: N/A

:

2.4 Minimum-Maximum Thinning Requirements : Not recommended

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

Minimum 10°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

80-85% maximum

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

81 microns

25 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 350 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B – Heat-Flex M505 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 12.3 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: Silver Brite Hi-Heat system, or zinc/Aluminum metal spray

3.8

Surface Preparation Requirements

: Clean, dry, and free from

contaminants

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

8 hours

5 hours

3 hours

2 hours

1 hour

• Post-Curing

   30 hours
  
   18 hours
  
   14 hours
  
     8 hours
  
     6 hours
  

If M505 is to be exposed to ambient weathering or moisture before service, it is required that the coating is post-cured by gradually elevating the temperature to a minimum of 205°C and maintaining this temperature for 2 hours.

3.10 Recommended Application

Airless (A/L) Spray

Conventional Spray

Brush

: Nozzle Size: 0.13” Fan Angle: 60°

Operating Pressure: 2000 psi

: Nozzle Size: .050” Atomizing Pressure: 35 psi

Fluid Pressure: 2 psi

: Suitable for brush application

                                                     ©Saudi Arabian Oil Company, 2021

Page 351 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B – Heat-Flex M505 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

31±2%

1.22 Kg/L

Viscosity

(ASTM D562)

: None available

Flash Point

(ASTM D93 or D56)

:

28°C

4.5

Approved Color/s

: White, Black, Aluminum

4.6

Finish

: Matt

Special Instructions:

Maximum Surface Temperatures:

WHITE BLACK ALUMINUM

No discoloration 250°C 250°C 600°C

Slight discoloration 350°C 350°C See additional note below

Note: Zinc silicate or zinc metal spray should not be used above 400°C, use Aluminum

metal spray instead.

                                                            ©Saudi Arabian Oil Company, 2021

Page 352 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C

Type of Coating

:

Single Component Inert Multipolymeric Matrix Coating

Manufacturer

: Sherwin Williams

Product Name : HEAT-FLEX® HI-TEMP 1200

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

6 months

Mixing

2.1

No. of Components 2.1.1 Base : B59A225 GREY

                                         :

1

2.1.2 Hardener (Curing Agent) : N/A

B59A226 DARK GREY

2.2 Mixing Ratio

2.3

Thinner

: N/A

: Not recommended Clean Up Xylene, C2

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 260°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% Max

                                                     ©Saudi Arabian Oil Company, 2021

Page 353 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - HEAT-FLEX® HI-TEMP 1200 (Cont’d)

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

200 microns

125 microns

22.5 m2/L

3.6 Minimum Number of Coats

  :

2 coats

3.7

Applicable Substrate:

Iron Steel and Stainless Steel

3.8

Surface Preparation Requirements:

Iron & Steel: SSPC-SP6, 40-63 micron profile Or SSPC-SP11, 25-63 micron profile Stainless Steel: SSPC-SP1. Do not use chlorinated solvents for cleaning

3.10 Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      20oC

                      30°C

3hrs

2hrs

2hrs

None

    90mins

24hrs

None

    60mins

24hrs

None

    50mins

24hrs

                      40oC                   1.5hrs

None

    40mins

24hrs

                      50°C

1hr

None

     30mins

24hrs

24hrs

24hrs

24hrs

24hrs

24hrs

                                                            ©Saudi Arabian Oil Company, 2021

Page 354 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11C - HEAT-FLEX® HI-TEMP 1200 (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Unit…30:1 Pump Pressure…2,700 – 3,000 psi Hose…3/8” ID Tip …17-19 thou (0.43-0.48 mm) Filter …60 mesh Reduction …Not recommended

Fluid Tip …45-55 thou (1.14-1.40 mm) Air Nozzle…20 cfm Atomization Pressure…50 psi Fluid Pressure …20 - 30 psi Reduction …Not recommended

Brush…China bristle, small areas only Reduction …Not recommended

Conventional Spray:

Brush:

Physical Properties

4.1

4.2

4.3

4.4

4.5 4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

57% ± 2 %

1.93 Kg/L

:

:

:

Flash Point

(ASTM D93 or D56)

: 31°C

Approved Color/s Finish

: Grey, Dark Grey, Aluminum : Low Sheen

Special Instructions: During application to hot steel, apply coating in several thin passes to allow solvent to escape and to prevent blistering. Allow at least 15-20 minutes between each coat.

                                                     ©Saudi Arabian Oil Company, 2021

Page 355 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A/20B

Type of Coating

: Tank Lining

Manufacturer

: Sherwin Williams

Product Name : Dura-Plate UHS

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

36 months

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2

2.2 Mixing Ratio

2.3

Thinner

SAP M/N (SAMS S/N)

: 4:1 by volume

Not recommended Cleanser No. 13

:

:

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

Application

: None

:

20 – 30 mins

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 43°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

85% Max

3.3

3.4

Typical Wet Film Thickness Per Coat

  :

500 microns

Typical Dry Film Thickness Per Coat

  :            500 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 356 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A/20B - Duraplate UHS (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

40 m2/L

3.6 Minimum Number of Coats

  :

1

3.7

3.8

Applicable Substrate

:

Steel

Surface Preparation Requirements:

Minimum recommended surface preparation: Steel: Atmospheric: SSPC-SP6/NACE 3/Sa2 50 micron profile or SSPC-SP/NACE WJ-3/NV-2 Immersion: SSPC-SP10/NACE2/Sa2½ 50-75 micron profile or SSPC- SP/NACE WJ-2/NV-2

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      20oC

                      30°C

                      40oC

                      50°C

48 hrs

18 hrs

10 hrs

8 hrs

6 hrs

21 days

    48 hrs

10 days 10 days

14 days

     18 hrs

5 days 5 days

14 days

     10 hrs

2 days

4 days

14 days

     8 hrs

 24 hrs

14 day 6 hrs

 24 hrs

3 days

3 days

                                                     ©Saudi Arabian Oil Company, 2021

Page 357 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-20A/20B - Duraplate UHS (Cont’d)

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Unit…74:1 Pump, minimum Pressure…6000 psi minimum Hose…3/8” ID Tip … 019” - .021” Filter …30 mesh

Conventional Spray:

N/A

Brush:

For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

:

98% ± 2%, mixed

Product Weight

(ASTM D1475)

: 1.26 Kg/L

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

93°C mixed

4.5

Approved Color/s

: White

4.6

Finish

: Gloss

Special Instructions: Request detailed application instruction from coating manufacturer for

using the product under APCS-20A (hand lay-up) or APCS-20B (spray applied).

                                                            ©Saudi Arabian Oil Company, 2021

Page 358 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

p. Sigma – Approved Products

              APCS-1A

SigmaZinc 158 SigmaCover 410

              APCS-1B

Inorganic Zinc Primer: Solvent-Based Epoxy Topcoat

SigmaCover 410 (Alu) Use Epoxy Topcoat of APCS-1A as topcoat

Epoxy Primer

               APCS-1C

SigmaZinc 102HS Use Epoxy Topcoat of APCS-1A as topcoat

Organic Zinc Rich Primer

               APCS-1D

Use APCS-1A as primer and intermediate coat SigmaDur Gloss 7528

Polyurethane Topcoat

               APCS-1E

Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

               APCS-1F

Use APCS-1C as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D as topcoat

              APCS-2A/2C (with Interchangeable Products)

PhenGuard 930 PhenGuard 935 PhenGuard 940

              APCS-2B (with Interchangeable Products)

PhenGuard 930 PhenGuard 940

              APCS-2E

Epoxy Primer Epoxy Intermediate Coat Epoxy Topcoat

Epoxy Intermediate Epoxy Primer/Topcoat

Sigma Novaguard 7453

Epoxy Phenolic

               APCS-3

Sigma C-200a Coal Tar

Coal Tar Epoxy

               APCS-4

Sigmarine 24 Sigma Aluminum Paint SA35

Primer Aluminum Topcoat

                                                     ©Saudi Arabian Oil Company, 2021

Page 359 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

   Sigma – Approved Products (Cont'd)

             APCS-6

Use APCS-4 primer Sigma Enamel SA21

Alkyd Topcoat

       APCS-10

Vikote 63

               APCS-11A

Bituminous Coating

Use primer of APCS-1A as primer SigmaTherm 540

High Temp. Silicone Coating: Aluminum Topcoat

              APCS-11B

SigmaTherm 540

High Temp. Silicone Coating; Aluminum, Self-Priming

               APCS-12

Use APCS-1B as Primer and Topcoat

               APCS-17A

SigmaZinc 158

Inorganic Zinc Silicate: Solvent-Based

               APCS-22A

SigmaCover 410 (Alu) SigmaCover 410

Epoxy Primer Epoxy Topcoat

              APCS-26

SigmaCover 410 (Alu) SigmaCover 410

Epoxy Primer Epoxy Primer/Topcoat

              APCS-26T

Use APCS 26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

               APCS-113A

Sigmaline 2000

                                                            ©Saudi Arabian Oil Company, 2021

Page 360 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D/11A/17A Primer

Type of Coating

:

Inorganic Zinc Primer: Solvent-Based

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaZinc 158

SAP M/N (SAMS S/N)

:

1000194146

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 9 months 24 months (store moisture free)

(binder) (powder)

: 2 : 7558 - Binder : 7558 - Powder

: 81:19 (binder : powder) By volume

: Sigma Thinner 90-53 : 1000198445 (09-738-220)

2.4 Minimum-Maximum Thinning Requirements

: 0 to 10%

2.5

Induction Time

2.6

Pot Life

Application

: Nil

: 12 hours @ 20°C 8 hours @ 25°C 6 hours @ 30°C 3 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: 50 - 80%

3.3

Typical Wet Film Thickness Per Coat

: 100-115 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 361 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 1A/1D/11A/17A Primer - SigmaZinc 158 (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

: 75 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 26 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: Carbon Steel

3.8

Surface Preparation Requirements

: ISO 8501-1 Sa 2½, blasting profile 40 – 70 µm

3.9

Drying Time at specified DFT

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 18 hours 12 hours 6 hours 4 hours 4 hours

none none none none none

To Handle

To Service see note 1

1 hour ½ hour ½ hour ½ hour ½ hour

Full cure see note 2 18 hours 12 hours 6 hours 4 hours 4 hours

Note 1: Material should be fully cured to have its full mechanical and anti-corrosive

performance.

Note 2: Relative humidity should be 50% or more for coating to cure.

3.10 Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip Size: 0.019 to 0.025 inch

Fluid Pressure: 1280 to 1700 psi

: Nozzle Size: 2 mm Nozzle Pressure: 43 psi

Brush

: For touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

:

63 to 67%

                                                            ©Saudi Arabian Oil Company, 2021

Page 362 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 1A/1D/11A/17A Primer - SigmaZinc 158 (Cont’d)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

:

:

:

2.3 Kg/L

16 – 20 seconds; DIN 4-cup

16.5°C

4.5

Approved Color/s

1000194146

Greenish grey

4.6

Finish

: Flat

Special Instructions:

Mixing:

1. Take the bag with zinc powder out of the drum.
2. Shake the binder in the jerry can a few times to reach a certain degree of homogenization.
3. Pour about 2/3 of the binder in the empty drum.
4. With the jerry can now reduced in weight and containing more free space, shake it

vigorously to obtain a homogeneous mix with no deposits left on the bottom, and add this to the drum.

5. Add the zinc powder gradually to the pigmented binder in the drum and at the same time

continuously stir the mixture by using a mechanical mixer (keep the speed low).

6. Stir the zinc dust powder thoroughly through the binder (high speed) and keep stirring till, a

homogeneous mixture is obtained.

7. Strain mixture through a 30 - 60 mesh screen.
8. Agitate continuously during application (low speed). The use of a dedicated pump with a

constant agitation for a zinc silicate coating is recommended.

Thinner At application temperature above 30°C addition of max 10% by volume of Thinner 90-53 may be necessary.

DFT:

average dft 75 μm with a minimum of 60 μm on smooth non pitted, blast cleaned steel

average dft 100 μm with a minimum of 75 μm on rough or pitted, blast cleaned steel

Upgrading DFT: Only valid for spray application if the dft is below specification and an extra coat of SigmaZinc 158 has to be applied, SigmaZinc 158 should be thinned down with 25 - 50%

                                                     ©Saudi Arabian Oil Company, 2021

Page 363 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 1A/1D/11A/17A Primer - SigmaZinc 158 (Cont’d)

Thinner 90-53, in order to obtain a visible wet coat that remains wet for some time.

Overcoating – SigmaZinc 158 is a moisture curing zinc silicate, this means that it only cures after

sufficient take up of water (from the atmosphere or immersion) during and after application; it is recommended that relative humidity and temperature are measured during the curing time

– Before entering service or overcoating, a sufficient degree of cure should be obtained. – A relative humidity below 50% requires a much longer overcoating time. – When curing conditions are unfavorable or when reduced overcoat times are desired, curing

can be accelerated 4 hours after application by:

o wetting or soaking with water, keeping the surface wet for the next 2 hours,

followed by drying

o wetting or soaking with a 0.5% ammonia solution, followed by drying

– Before overcoating with topcoats, SigmaZinc 158 should always be visibly dry and checked

on sufficient curing

– For measuring of the curing, the MEK rub test according to ASTM 4752 is a suitable

method: after 50 double rubs with a cloth soaked in MEK (or alternatively Thinner 90-53) no dissolving of the coating should be observed. A rating of 4 or higher is suitable for overcoating.

In order to avoid possible popping effects (pinholes) it may be required to apply the next coat with extra thinner as a mist-coat followed by a full coat after initial flash-off (see Sigma Information sheet 1706, “Zinc Silicates Quality Aspects Application”)

                                                            ©Saudi Arabian Oil Company, 2021

Page 364 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E Primer

Type of Coating

: Epoxy Primer: Polyamide-Cured

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaCover 410 (Alu)

SAP M/N (SAMS S/N)

:

1000194626

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 2 : 6823 Base : 6823 Hardener

: 80:20 (Base : Hardener) By volume

: Thinner 91-92 : 1000198455

2.4 Minimum-Maximum Thinning Requirements

: 5 to 10% by Volume

2.5

Induction Time

2.6

Pot Life

: Nil

: 12 hours @ 10°C 6 hours @ 20°C 4 hours @ 25°C 3 hours @ 30°C 2 hours @ 40°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 95 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 365 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E Primer – SigmaCover 410 (Alu) (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

: 75 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 32 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: CS (nonferrous possible, check with Sigma .)

: CS – ISO Sa 2½, blasting profile 40 – 70 µm (non-ferrous metals: sweep blast)

Substrate Temperature

Recoat Interval Minimum Maximum

To Handle

To Service see note **

Full cure

10°C 20°C 30°C 40°C 50°C

24 hours 8 hours 6 hours 4 hours 3 hours

none* none* none* none* none*

24 hours 8 hours 6 hours 4 hours 3 hours

14 days 7 days 5 days 3 days 3 days

**

This product has an unlimited recoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating. The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured, however is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Size: 0.018-0.021 inch Fluid Pressure: 2,800 -3,500 psi

                                                            ©Saudi Arabian Oil Company, 2021

Page 366 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1B/1E Primer – SigmaCover 410 (Alu) (Cont’d)

Conventional Spray

: Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

Brush

: For touch-up only

Physical Properties

4.1

Volume Solids (ASTM D2697)

: 78 to 82%

4.2

Product Weight (ASTM D1475)

: 1.5 to 1.9 kg/l

4.3

Viscosity (ASTM D562)

:

(12-17 dPa.s depending on color)

4.4

Flash Point (ASTM D93 or D56)

: 20⁰C

4.5

Approved Color/s

: 1000194626 Aluminum-Grey

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 367 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F Primer

Type of Coating

: Zinc-Rich Primer

Manufacturer

: Sigma Paints S.A. Ltd

Product Name

: SigmaZinc 102HS

SAP M/N (SAMS S/N)

:

1000195361 Red-Brown

Storage 1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing 2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 2 : 7702 Base : 7702 Hardener

: 80:20 (base:hardener) By volume

: Thinner 91-92 : 1000198449 (09-738-240)

2.4 Minimum-Maximum Thinning Requirements

: 5 to 10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: Nil

: 12 hours @ 10°C 6 hours @ 20°C 4 hours @ 25°C 3 hours @ 30°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 90 micrometers

                                                            ©Saudi Arabian Oil Company, 2021

Page 368 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F Primer - SigmaZinc 102HS (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

: 60 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 26.4 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: Carbon Steel

3.8

Surface Preparation Requirements

: ISO-8501-1 Sa2½, blasting profile 40 – 70 µm

3.9

Drying Time at specified DFT

Substrate Temperature

Recoat Interval Minimum Maximum

To Handle

To Service see note **

Full cure

10°C 20°C 30°C 40°C 50°C

24 hours 8 hours 6 hours 4 hours 3 hours

none* none* none* none* none*

24 hours 8 hours 6 hours 4 hours 3 hours

14 days 7 days 5 days 3 days 3 days

Several months when free from zinc salts and contamination. – zinc rich primers can form zinc salts on the surface; preferably they should

not be weathered for long periods before overcoating

– an interval of several months can be allowed under clean interior exposure

conditions

– in industrial or marine conditions or if a long recoat interval is required, it is recommended to apply a suitable sealer direct after the minimum recoating interval

– before overcoating any visible surface contamination must be removed by high pressure water cleaning, sandwashing, sweep blasting or mechanical cleaning

**

This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured; however, is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip Size: 0.017 to 0.019 inch Fluid Pressure: 2,130 psi

                                                     ©Saudi Arabian Oil Company, 2021

Page 369 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1C/1F Primer - SigmaZinc 102HS (Cont’d)

Conventional Spray

: Nozzle Size: 1.8-2.2 mm Nozzle Pressure: 43-85 psi

Brush

: For touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

64 - 68%

2.3 – 2.5 Kg/L

5-6 dPa.s

30.6°C

4.5

Approved Color/s

1000195361

Red Brown

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 370 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F

Type of Coating

: Epoxy Intermediate / Topcoat, Polyamide-Cured

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaCover 410

SAP M/N (SAMS S/N)

:

RAL 8012 1000194629 Red Brown Light Grey 1000194797 RAL 7038 Safety Yellow RAL 1023 1000194960

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner

: 2 : 6823 Base : 6823 Hardener

: 80:20 (Base:Hardener) By volume

: Thinner 91-92

SAP M/N (SAMS S/N)

: 1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements

2.5

Induction Time

2.6

Pot Life

: 0 to 10% by volume 30 to 40% for mist-coat

: Nil

: 12 hours @ 10°C 6 hours @ 20°C 4 hours @ 25°C 3 hours @ 30°C 2 hours @ 40°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 50°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 371 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F – SigmaCover 410 (Cont’d)

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 125 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 100 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 32 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Drying Time at specified DFT

Substrate Temperature

Recoat Interval Minimum Maximum

To Handle

To Service see note **

Full cure

10°C 20°C 30°C 40°C 50°C

24 hours 8 hours 6 hours 4 hours 3 hours

none* none* none* none* none*

24 hours 8 hours 6 hours 4 hours 3 hours

14 days 7 days 5 days 3 days 3 days

**

This product has an unlimited recoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating. The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured, however is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.8

Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip Size: 0.018-0.021 inch Fluid Pressure: 2,800 - 3,500 psi

: Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

Brush

: For touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 372 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1C/1D/1E/1F – SigmaCover 410 (Cont’d)

Physical Properties

4.1

Volume Solids

(ASTM D2697)

: 78 to 82%

4.2

Product Weight

(ASTM D1475)

: 1.5 to 1.9 kg/l

4.3

Viscosity

(ASTM D562)

:

(12-17 dPa.s depending on color)

4.4

Flash Point

(ASTM D93 or D56) : 20⁰C

4.5

Approved Color/s:

1000194629 1000194797 1000194960

Red Brown RAL 8012 Light Grey RAL 7038 Safety Yellow RAL 1023 (Other Colors on request)

4.6

Finish:

Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 373 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat

Type of Coating

: Aliphatic Acrylic Polyurethane Topcoat

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaDur Gloss 7528

SAP M/N (SAMS S/N)

:

1000194672 Yellow RAL 1023, 1000194675 White RAL 9010, 1000194793 Grey RAL 7038, 1000194795 Red RAL 3000, 1000194851 Green 4199

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

: 2 : 7528 Base : 7528 Hardener

2.2 Mixing Ratio

: 88:12 (base:hardener)

2.3

Thinner SAP M/N (SAMS S/N)

: Thinner 21-06 : 1000198479 (09-738-345)

2.4 Minimum-Maximum Thinning Requirements : 0 – 10%

2.5

Induction Time

: None

2.6

Pot Life

Application

: 5 hours @ 20°C 4 hours @ 25°C 3 hours @ 30°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

n/a - 80%

                                                            ©Saudi Arabian Oil Company, 2021

Page 374 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat - SigmaDur Gloss 7528 (Cont’d)

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats

3.7

Drying Time at specified DFT

:

:

:

:

90 microns

50 microns

22 m2/L

1

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum

To Handle

To Service see note **

Full cure

8 hours 6 hours 5 hours 2 hours 2 hours

none* none* none* none* none*

8 hour 6 hour 5 hour 3 hour 2 hour

6 days 4 days 3 days 2 days 2 days

• Before overcoating after exposure, clean thoroughly by high pressure fresh water

and allow to dry.

** This product is part of a system, it will reach it maximum physical and chemical

resistance when all layers are fully cured, however is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.8

Recommended Application Equipment

Airless (A/L) Spray

Conventional Spray

: Tip Size: 0.011-0.013 inch Fluid Pressure: 2,800 psi

: Tip Size: 1-1.5 Atomizing Pressure: 43-57 psi

Brush

: For small areas only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

:

:

54 - 58%

1.2 – 1.4 Kg/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 375 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/1F/26T Topcoat - SigmaDur Gloss 7528 (Cont’d)

4.3

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

4.5

Approved Color/s:

1000194672 1000194675 1000194793 1000194795 1000194851

:

:

6-8 dPa.s 102 – 106 KU

33°C

Yellow White Grey Red Green

RAL 1023 RAL 9010 RAL 7038 RAL 3000 4199 (Other colors upon request)

4.6

Finish:

Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 376 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C

Type of Coating

: Epoxy: Phenolic

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: Sigma PhenGuard 930 / Sigma PhenGuard 935 / Sigma PhenGuard 940

SAP M/N (SAMS S/N)

:

1000194295, 1000194298, 1000194352

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 2.1.2 Hardener (Curing Agent)

Base

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 2 : 7409/7435/7436 : 7409/7435/7436

: 88:12 (base:hardener)

: Thinner 91-92 : 1000198377 (09-738-140)

2.4 Minimum-Maximum Thinning Requirements

: 5 to 10%

2.5

Induction Time

2.6

Pot Life

: 20 minutes @ 15°C 15 minutes @ 20°C 10 minutes @ 25°C

: 6 hours @ 10°C 4 hours @ 20°C 3 hours @ 25°C 1.5 hours @30°C ¾ hour @ 40°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 377 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C – Sigma PhenGuard 930/935/940 (Cont’d)

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 150 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 100 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 26.4 m2/L

3.6 Minimum Number of Coats

3.7

Applicable Substrate

: 3

: CS

3.8

Surface Preparation Requirements

: ISO-8501-1 Sa2½

3.9

Drying Time at specified DFT:

For Primer coat:

Substrate

Recoat Interval

To handle

Temperature Minimum Maximum

10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C

5 days 4 days 36 hours 30 hours 24 hours 20 hours 16 hours 12 hours 8 hours

28 days 25 days 21 days 18 days 14 days 10 days 7 days 4 days 3 days

36 hours 36 hours 24 hours 20 hours 16 hours 14 hours 10 hours 8 hours 5 hours

Full Cure See note 14 days 14 days 10 days 9 days 7 days 6 days 5 days 4 days 4 days

Note: - Full cure of Phenguard tank coating system before exposure to media/cargoes without

note 4, 7, 8 or 11 and ballast water and tank test with sea water.

• Minimum curing time of Phenguard tank coating system before exposure to

media/cargoes with note 4, 7, 8 or 11: 3 months

• For detailed information on resistance and resistance notes, please refer to the latest

issue of the Cargo Resistance List (tankselect.sigmacoatings.com).

• For transport of methanol and vinyl acetate monomer, a hot cure is required which cannot be substituted by a service period of 3 months with nonaggressive cargoes

                                                           ©Saudi Arabian Oil Company, 2021
  

Page 378 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Sigma PhenGuard 930/935/940 (Cont’d)

• Adequate ventilation must be maintained during application and curing
• The performance of the applied system strongly depends on the curing degree of the

first coat at time of recoating. Therefore, overcoating time between 1st and 2nd coat is extended in comparison between 2nd and 3rd coat (see recoat interval)

For second and third coats:

Substrate

Recoat Interval

To handle

Temperature Minimum Maximum

10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C

36 hours 32 hours 24 hours 20 hours 16 hours 14 hours 12 hours 10 hours 8 hours

28 days 25 days 21 days 18 days 14 days 10 days 7 days 4 days 3 days

36 hours 36 hours 24 hours 20 hours 16 hours 14 hours 10 hours 8 hours 5 hours

Full Cure See note 14 days 14 days 10 days 9 days 7 days 6 days 5 days 4 days 4 days

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

Physical Properties

4.1

Volume Solids (ASTM D2697)

4.2

Product Weight (ASTM D1475)

4.3

Viscosity (ASTM D562)

4.4

Flash Point (ASTM D93 or D56)

Tip Size: 0.018 to 0.021 inch Fluid Pressure: 2,130 psi

Nozzle Size: 2 mm Nozzle Pressure: 43 psi

For touch-up only

: 66 ± 2%

: 1.7 Kg/L

: 102 – 123 KU

: 23.7°C Base, 29.1°C Hardener

                                                     ©Saudi Arabian Oil Company, 2021

Page 379 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2A/2C - Sigma PhenGuard 930/935/940 (Cont’d)

4.5

Approved Color/s:

Sigma PhenGuard 930 Sigma PhenGuard 935 Sigma PhenGuard 940

1000194295 Off White 1000194298 Pink 1000194352 Grey

4.6

Finish:

                          Eggshell

5.

Special Instructions:

• All 3 products / approved shades have the same performance and are interchangeable. For example a Grey/Off-White/Grey system is allowed. The re-coating times of any of these products as the first or primer coat will not be affected and need to be treated as per the extended table.

90/10 rule to be followed with regards to applied minimum dry film thickness (DFT)

• Please refer also to PPG/Sigma tank coating procedures

• Stripe coating of edges after 1st and 2nd coat required to ensure 300 microns NDFT.

• Maximum DFT reading for primer should not be over 150 microns

• Maximum DFT reading for subsequent coats should not be over 200 microns.

                                                           ©Saudi Arabian Oil Company, 2021
  

Page 380 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B

Type of Coating

: Epoxy: Phenolic

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: Sigma PhenGuard 930 / Sigma PhenGuard 940

SAP M/N (SAMS S/N)

:

1000194295, 1000194352

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 2.1.2 Hardener (Curing Agent)

Base

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 2 : 7409/7435/7436 : 7409/7435/7436

: 88:12 (base:hardener)

: Thinner 91-92 : 1000198377 (09-738-140)

2.4 Minimum-Maximum Thinning Requirements

: 5 to 10%

2.5

Induction Time

2.6

Pot Life

: 20 minutes @ 15°C 15 minutes @ 20°C 10 minutes @ 25°C

: 6 hours @ 10°C 4 hours @ 20°C 3 hours @ 25°C 1.5 hours @30°C ¾ hour @ 40°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 381 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B – Sigma PhenGuard 930/940 (Cont’d)

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 150 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 100 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 26.4 m2/L

3.6 Minimum Number of Coats

3.7

Applicable Substrate

: 3

: CS

3.8

3.9

Surface Preparation Requirements

: ISO-8501-1 Sa2½

Drying Time at specified DFT:

For Primer coat:

Substrate

Recoat Interval

To handle

Temperature Minimum Maximum

10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C

5 days 4 days 36 hours 30 hours 24 hours 20 hours 16 hours 12 hours 8 hours

28 days 25 days 21 days 18 days 14 days 10 days 7 days 4 days 3 days

36 hours 36 hours 24 hours 20 hours 16 hours 14 hours 10 hours 8 hours 5 hours

Full Cure See note 14 days 14 days 10 days 9 days 7 days 6 days 5 days 4 days 4 days

Note: - Full cure of Phenguard tank coating system before exposure to media/cargoes without

note 4, 7, 8 or 11 and ballast water and tank test with sea water.

• Minimum curing time of Phenguard tank coating system before exposure to

media/cargoes with note 4, 7, 8 or 11: 3 months

• For detailed information on resistance and resistance notes, please refer to the latest

issue of the Cargo Resistance List (tankselect.sigmacoatings.com).

• For transport of methanol and vinyl acetate monomer, a hot cure is required which cannot be substituted by a service period of 3 months with nonaggressive cargoes

                                                           ©Saudi Arabian Oil Company, 2021
  

Page 382 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B – Sigma PhenGuard 930/940 (Cont’d)

• Adequate ventilation must be maintained during application and curing
• The performance of the applied system strongly depends on the curing degree of the first coat at time of recoating. Therefore, overcoating time between 1st and 2nd coat is extended in comparison between 2nd and 3rd coat (see recoat interval)

For second and third coats:

Substrate

Recoat Interval

To handle

Temperature Minimum Maximum

10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C

36 hours 32 hours 24 hours 20 hours 16 hours 14 hours 12 hours 10 hours 8 hours

28 days 25 days 21 days 18 days 14 days 10 days 7 days 4 days 3 days

36 hours 36 hours 24 hours 20 hours 16 hours 14 hours 10 hours 8 hours 5 hours

Full Cure See note 14 days 14 days 10 days 9 days 7 days 6 days 5 days 4 days 4 days

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

Physical Properties

4.1

Volume Solids (ASTM D2697)

4.2

Product Weight (ASTM D1475)

4.3

Viscosity (ASTM D562)

4.4

Flash Point (ASTM D93 or D56)

Tip Size: 0.018 to 0.021 inch Fluid Pressure: 2,130 psi

Nozzle Size: 2 mm Nozzle Pressure: 43 psi

For touch-up only

: 66 ± 2%

: 1.7 Kg/L

: 102 – 123 KU

: 23.7°C Base, 29.1°C Hardener

                                                     ©Saudi Arabian Oil Company, 2021

Page 383 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-2B – Sigma PhenGuard 930/940 (Cont’d)

4.5

Approved Color/s:

Sigma PhenGuard 930 Sigma PhenGuard 940

1000194295 Off White 1000194352 Grey

4.6

Finish:

Eggshell

Special Instructions:

• All 2 products / approved shades have the same performance and are interchangeable. For example a Grey/Off-White/Grey system is allowed. The re-coating times of any of these products as the first or primer coat will not be affected and need to be treated as per the extended table.

90/10 rule to be followed with regards to applied minimum dry film thickness (DFT)

• Please refer also to PPG/Sigma tank coating procedures

• Stripe coating of edges after 1st and 2nd coat required to ensure 300 microns NDFT.

• Maximum DFT reading for primer should not be over 150 microns

• Maximum DFT reading for subsequent coats should not be over 200 microns.

                                                           ©Saudi Arabian Oil Company, 2021
  

Page 384 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 2E

Type of Coating

: Epoxy Phenolic

Manufacturer

: Sigma Paints S.A Ltd

Product Name : Sigma Novaguard 7453

SAP M/N (SAMS S/N)

:

1000608685 (20 L Set), 1000608684 (10L Set), 1000608683 (5L Set)

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 7453 7453

        2.2

Mixing Ratio

:

(78 : 22)

2.3

Thinner

: No Thinner to be used

SAP M/N (SAMS S/N)

: N/A

2.4 Minimum-Maximum Thinning Requirements : N/A

2.5

Induction Time

2.6

Pot Life

: N/A

:

1 hour @ 200C

                                                                                                                  45 minutes @ 300C

3.

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10-50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:n/a- 80 %

3.3

Typical Wet Film Thickness Per Coat

  : 500 microns

                                                                                                                                                ( see special instructions )

3.4

3.5

Typical Dry Film Thickness Per Coat

  : 500 microns

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  : 40 m2/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 385 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 2E- Sigma NovaGuard 7453 (Cont’d)

3.6 Minimum Number of Coats

3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

  : 1

  : CS

  : ISO Sa 2 ½, surface profile

50-125 microns

                  Substrate                 Recoat Interval             To Handle     To Service       Full Cure
               Temperature     Minimum     Maximum

                      10°C              36 hours         3 months            30 hours                                  7 days

                      20oC               24 hours        2 months             16 hours                                  5 days

                      30°C              16 hours         1 month              10 hours                                  3 days

                      40oC               12 hours         2 weeks                6 hours                                 2 days

                      50°C                 8 hours         5 days                  4 hours                               1.5 days

                      Note :  -     Full cure is required before exposure to chemicals

• For detailed information on resistance and resistance notes, please refer to

the latest issue of the Cargo Resistance List (tankselect.sigmacoatings.com)

3.10 Recommended Application Equipment

Airless (A/L) Spray

: Tip size 0.021 inch

Use heavy duty single feed airless spray equipment preferably 60:1 pump ratio and suitable high pressure hoses/in-line heating or insulated hoses may be necessary to avoid cooling down of paint in hoses at low air temperature, length of hoses should be as short as possible

Nozzle pressure at 200C ( paint temperature ) min 28MPa ( 4061 psi approx.)

Nozzle pressure at 300C ( paint temperature ) min 22 MPa ( 3000 psi approx.)

                       Conventional Spray

:

n/a

                       Brush
                                                                                                            Max. dft by brushing: 150 μm

: For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 386 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 2E- Sigma NovaGuard 7453 (Cont’d)

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

100%

1.3 Kg/L

Viscosity

(ASTM D562)

: 30-50 poise (Rheolab MC1 E100

4.4

Flash Point

(ASTM D93 or D56)

:

n/a ( > 65°C )

4.5

Approved Color/s: Cream, Green ( Grey is also possible upon requirement )

4.6

Finish:

Gloss

 Special Instructions:

            measuring wet film thickness (WFT)

-

a deviation is often obtained between the measured apparent wft and the real applied wft this is due to the thixotropy and the surface tension of the paint which retards the release of air trapped in the paint film for some time recommendation is to apply a wft which is equal to the specified dft plus 60 μm

measuring dry film thickness (DFT)

because of low initial hardness, the dft innitially cannot be measured accurately due to the penetration of the measuring device into the soft paint film (time depending on temeprature) the dft should be measured using a calibration foil of known thickness placed in between the coating and the measuring device

                                                     ©Saudi Arabian Oil Company, 2021

Page 387 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3

Type of Coating

: Coal Tar Epoxy

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: Sigma C-200a Coal Tar

SAP M/N (SAMS S/N)

:

1000194372 / 100194375

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

2.4 Minimum-Maximum Thinning Requirements

2.5

Induction Time

2.6

Pot Life

: : :

:

2 3307 Base 3307 Hardener

86:14 (base : hardener)

: Thinner 21-06 :

1000198441 (09-738-180)

:

:

:

5 to 15%

15 minutes @ 20°C

6 hours @ 20 °C 5 hours @ 25°C 2 hours @ 30°C 1 hour @ 40°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

                                                            ©Saudi Arabian Oil Company, 2021

Page 388 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3 - Sigma C-200a Coal Tar (Cont’d)

3.3

Typical Wet Film Thickness Per Coat

: 256 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 200 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats Applicable Substrate 3.7

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

Substrate

Recoat Interval

To Handle

Temperature Minimum Maximum 24 hours 16 hours 8 hours 7 hours 6 hours 5 hours 4 hours 3 hours 2 hour

20 days 14 days 7 days 5 days 4 days 3 days 3 days 2 days 1 days

10°C 15°C 20°C 25°C 30°C 35°C 40°C 45°C 50°C

1 day 18 hours 12 hours 9 hours 6 hours 6 hours 5 hours 5 hours 4 hours

: 31.2 m²/L

: 2 : CS, Concrete

: CS – ISO-8501-1 Sa 2½, blasting profile 40 – 70 µm (non-ferrous metals: sweep blast)

To Service See note Min. 24 hours Min. 24 hours Min. 24 hours Min. 24 hours Min. 24 hours Min. 24 hours Min. 24 hours Min. 24 hours Min. 24 hours

Full Cure

24days 14 days 10 days 8 days 5 days 4 days 3 days 3 days 3 days

Note: This product is part of a system, it will reach it maximum physical, and chemical

resistance when all layers are fully cured, however is resistant to exposure to water and slightly polluted atmosphere after 24 hours.

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Tip Size: 0.019 to 0.023 inch Fluid Pressure: 2,500 psi to 2,700 psi

Conventional Spray:

Nozzle Size: 0.059 to 0.118 inch Nozzle Pressure: 28 to 57 psi

Brush:

Four touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 389 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-3 - Sigma C-200a Coal Tar (Cont’d)

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

4.5

Approved Color/s

:

:

:

:

:

78%

1.28 to 1.32 Kg/L

130 – 160 poises

26°C Base, 26°C Hardener

1000194372 Brown 1000194375 Black

4.6

Finish

: Eggshell

Special Instructions:

On concrete 720 microns to be applied in 2 or 3 coats (in 2 coats overlaps are likely to be over 400 microns which may result in sagging and reduced drying speed)

                                                            ©Saudi Arabian Oil Company, 2021

Page 390 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer

Type of Coating

: Zinc Phosphate Primer

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: Sigmarine 24

SAP M/N (SAMS S/N)

:

1000197976 / 1000198011

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: : :

:

1 7135 n/a

n/a

: Thinner 20-05 1000198474 :

2.4 Minimum-Maximum Thinning Requirements

:

0 - 3%

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 63 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 35 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 391 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer - Sigmarine 24 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 22.4 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Applicable Substrate

: Carbon Steel

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: ISO-8501-1 Sa2½, blasting profile 40 – 70 µm

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 36 hours 24 hours 12 hours 8 hours 6 hours

none* none* none* none* none*

To Handle see note ** 12 hours 4 hours 2 hours 1.5 hours 1 hour

To Service

Full cure

**

Coating should be clean (dust, and other contaminant free) before recoating. This is an air-drying (oxidative curing) product, hence the applied film thickness has a big effect on the hardness development. Over thickness will not only retard drying but can also result in surface wrinkling.

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Tip Size: 0.017 to 0.019 inch Fluid Pressure: 1,700 to 2,130 psi

Conventional Spray:

Nozzle Size: 1.7-2 mm Nozzle Pressure: 28 to 42 psi

Brush:

For touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

:

:

56 ± 2%

1.3 – 1.5 Kg/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 392 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer - Sigmarine 24 (Cont’d)

4.3

Viscosity

(ASTM D562)

:

83 – 96 KU

4.4

Flash Point

(ASTM D93 or D56) :

41°C

4.5

Approved Color/s

:

1000197976 Red Brown 1000198011 Yellow

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 393 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat

Type of Coating

: Aluminum-Pigmented Topcoat

Manufacturer

: Sigma Paints S.A. Ltd

Product Name

: Sigma Aluminum Paint SA35

SAP M/N (SAMS S/N)

:

1000196402

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: : :

:

1 0604 n/a

n/a

: Thinner 20-05 1000198474 :

2.4 Minimum-Maximum Thinning Requirements

: Nil (Airless Spray)

2.5

Induction Time

2.6

Pot Life

Application

: N/A

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 -50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 65 micrometers

                                                            ©Saudi Arabian Oil Company, 2021

Page 394 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat - Sigma Aluminum Paint SA35 (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

: 25 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 15.2 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Drying Time at specified DFT:

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 36 hours 24 hours 14 hours 12 hours 10 hours

none* none* none* none* none*

To Handle see note ** 3 hours 2 hours 1 hours ¾ hour ½ hour

To Service

Full cure

**

Coating should be clean (dust, and other contaminant free) before recoating. This is an air-drying (oxidative curing) product, hence the applied film thickness has a big effect on the hardness development. Over thickness will not only retard drying but can also result in surface wrinkling.

3.8

Recommended Application Airless (A/L) Spray:

Tip Size: 0.017 to 0.019 inch Fluid Pressure: 1,700 to 2,100 psi

Conventional Spray:

Nozzle Size: 1.8 mm Nozzle Pressure: 43 to 57 psi

Brush:

For touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

:

:

:

38%

0.98 to 1.05 Kg/L

4 – 5 dPa.s

                                                     ©Saudi Arabian Oil Company, 2021

Page 395 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat - Sigma Aluminum Paint SA35 (Cont’d)

4.4

Flash Point (ASTM D93 or D56)

4.5

Approved Color/s

4.6

Finish

:

:

:

38 °C

1000196402 Aluminum

Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 396 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat

Type of Coating

: High Gloss Enamel Topcoat

Manufacturer

: Sigma Paints S.A. Ltd

Product Name

: Sigma Enamel SA21

SAP M/N (SAMS S/N)

: 1000195487, 1000195490, 1000195532, 1000195495, 1000195571 1000195577, 1000195631, 1000195637, 1000195650, 1000195683 1000195685, 1000195687, 1000195689, 1000195742, 1000195745 1000195747, 1000195749, 1000195801, 1000195803, 1000195831

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing 2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

2.4 Minimum-Maximum Thinning Requirements

2.5

Induction Time

2.6

Pot Life

Application

: 1 : 0649 n/a :

:

n/a

: Thinner 20-05 :

1000198474 (09-738-340)

:

:

:

8 -12%

n/a

n/a

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 70 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 397 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat - Sigma Enamel SA21 (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

: 35 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 20 m²/L

3.6 Minimum Number of Coats

: 1

3.7

Drying Time at specified DFT

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 24 hours 20 hours 16 hours 14 hours 10 hours

none* none* none* none* none*

To Handle see note ** 8 hours 4 hours 2 hours 1½ hours 1 hour

To Service

Full cure

**

Coating should be clean (dust, and other contaminant free) before recoating. This is an air-drying (oxidative curing) product, hence the applied film thickness has a big effect on the hardness development. Over thickness will not only retard drying but can also result in surface wrinkling.

3.8

Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Tip Size: 0.013 inch Fluid Pressure: 1,700 psi

Nozzle Size: 1.8 to 2.0 mm Nozzle Pressure: 43 to 57 psi

Brush:

For touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

4.2

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

:

:

:

47 to 50% (depending on shade)

1.0 to 1.2 kg/L

85 – 103 ku (9 - 12 dPa.s)

                                                            ©Saudi Arabian Oil Company, 2021

Page 398 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat - Sigma Enamel SA21 (Cont’d)

4.4

Flash Point

(ASTM D93 or D56)

:

38 °C

4.5

Approved Color/s:

1000195487 1000195490 1000195532 1000195495 1000195571 1000195577 1000195631 1000195637 1000195650 1000195683 1000195685 1000195687 1000195689 1000195742 1000195745 1000195747 1000195749 1000195801 1000195803 1000195831

Black Violet Blue Green Grey Pale Green Orange Oxide Red Red

White Yellow Caterpillar Yellow Driftwood beige Capri Blue Red Lilac

RAL 9011 RAL 5000 RAL 6005 RAL 7023 RAL 6021 RAL 2011 RAL 3009 RAL 3002 RAL 9010 RAL 1021 SG-3344 10YR 8/4 RAL 5019 RAL 4001

2.5Y 9/4 2.5 PB 2/6 10R5/16 10R3/4 2.5Y8/16

4.6

Finish:

Gloss

                                                     ©Saudi Arabian Oil Company, 2021

Page 399 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-10

Type of Coating

: Bituminous coating

Manufacturer

: Sigma Paints S.A. Ltd

Product Name

: Sigma Vikote 63

SAP M/N (SAMS S/N)

:

1000194025, 1000194029, 1000194032

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 1 : 7102 : n/a

: n/a

: Thinner 20-05 : 1000198474

2.4 Minimum-Maximum Thinning Requirements

: 0 to 5% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: Nil

: n/a

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 40°C

3.2 Minimum-Maximum Allowable Relative Humidity

: 0 - 80%

3.3

3.4

Typical Wet Film Thickness Per Coat

: 800 micrometers

Typical Dry Film Thickness Per Coat

: 500 micrometers

                                                            ©Saudi Arabian Oil Company, 2021

Page 400 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-10 – Sigma Vikote 63 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 24.8 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: CS & Concrete

3.8

Surface Preparation Requirements

: CS - ISO-8501-1 Sa2½, Concrete - Sweep blast

3.9

Drying Time at specified DFT

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum

8 hours 7 hours 5 hours 4 hours 3 hours

none* none* none* none* none*

To Handle see note ** 8 hours 7 hours 5 hours 4 hours 3 hour

To Service

8 days 8 days 5 days 5 days 3 days

**

Coating should be clean (dust, and other contaminant free) before recoating. This is a physically drying product (dries by solvent evaporation only), hence the applied film thickness has a big effect on the hardness development. Over thickness will retard drying and can cause surface crocodiling (especially at elevated temperatures).

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

Tip Size: 0.023 inch Fluid Pressure: 1,700-2,130 psi 0-5% thinner 20-05

Nozzle Size: 2 – 3 mm Nozzle Pressure: 43-57 psi 5-10% thinner 20-05

for touch up and spot repair only 0-5% thinner 20-05

                                                     ©Saudi Arabian Oil Company, 2021

Page 401 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-10 – Sigma Vikote 63 (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

4.5

Volume Solids (ASTM D2697)

: 57 ± 2%

Product Weight (ASTM D1475)

: 1.2 Kg/L

Viscosity (ASTM D562)

: 40-60 dPa.s

Flash Point (ASTM D93 or D56)

: 39°C

Approved Color/s

: 1000194025 Black 1000194029 Black 1000194032 Black

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 402 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B

Type of Coating

: Silicone Topcoat, self-priming

Manufacturer

: Sigma Paints S.A. Ltd

Product Name

: SigmaTherm 540

SAP M/N (SAMS S/N)

:

1000196488

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

9 Months

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: : :

:

1 7564 n/a

n/a

: Thinner 21-06 (Cleaning only) :

1000198479

2.4 Minimum-Maximum Thinning Requirements

: None

2.5

Induction Time

2.6

Pot Life

Application

:

:

n/a

n/a

3.1 Minimum-Maximum Allowable Substrate Temperature : 10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 56 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 25 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 403 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B - SigmaTherm 540 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 18 m2/L

3.6 Minimum Number of Coats

         3.7

Applicable Substrate

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT:

: 1

:

:

CS & SS

CS-ISO Sa 2½ & SS – SP-1 & Sweep blast

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 36 hours 24 hours 16 hours 12 hours 10 hours

none none none none none

To Handle

To Service see note 1

Full cure see note 2

4 hour 3 hour 1 hour ½ hour ½ hour

Note 1: This product is part of a system, it will reach it maximum physical and thermal

resistance when all layers are fully dried and cured, however is resistant to light handling and exposure to sun and rain at the dry to handle time. Note 2: This silicone topcoat is initially mainly physical drying (solvent evaporation

only) which will allow for careful handling (this type of product does not reach the strength of an epoxy coating). Further mechanical strength is achieved after it has been exposed to hot service temperatures.

3.8

Recommended Application Equipment

Conventional Spray:

Nozzle Size: 1.5 – 2mm Nozzle Pressure: 43 - 57 psi

Brush:

For touch-up only

• If airless spray is used , extra care should be taken to avoid over thickness

Physical Properties:

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

45 ± 2%

1.1 Kg/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 404 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-11A/11B - SigmaTherm 540 (Cont’d)

4.3

Viscosity

(ASTM D562)

4.4

Flash Point

(ASTM D93 or D56)

4.5

Approved Color/s

4.6

Finish

:

:

16 to 18 seconds DIN cup 4

26°C

: Aluminum

: Eggshell

                                                     ©Saudi Arabian Oil Company, 2021

Page 405 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 12

Type of Coating

: Epoxy Primer

Manufacturer

: Sigma Paints S.A. Ltd

Product Name : SigmaCover 410 (Alu)

SAP M/N (SAMS S/N)

:

1000194626

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

                                         :

2

6823 Base

6823 Hardener

        2.2

Mixing Ratio

: 80:20

(Base

: Hardener)

2.3

Thinner

By volume

: Thinner 91-92

SAP M/N (SAMS S/N)

:

1000198455 ( 09-738-280)

2.4 Minimum-Maximum Thinning Requirements :

5 to 10% by Volume 30 to 40% for miscoat

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

4 hours @ 25°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C - 50⁰C

3.2 Minimum-Maximum Allowable Relative Humidity

:

n/a - 80%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

125 micrometers

100 micrometers

32 m2/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 406 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 12 Primer Sigmacover Primer 410 (Alu) (Cont’d)

3.6 Minimum Number of Coats

  :

1

3.7 3.8

Applicable Substrate Surface Preparation Requirements

         3.9

Drying Time at specified DFT

: (CS, GS, GI, SS etc : (CS – ISO Sa 2½, .) blasting

profile 40 – 70 μm , GI, SS Sweep blast) ,

To Handle To Service Full Cure

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum See note **

                      10°C
                      20oC
                      30°C
                      40oC
                      50°C

24 Hours None* 24 Hours 14 Days 8 Hours None* 8 Hours 7 Days 6 Hours 5 Days 6 Hours None* 4 Hours None * 4 Hours 3 Days 3 Hours 3 Days 3 Hours None*

**

This product has an unlimitedrecoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resitance when all layers are fully cured, however is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.10 Recommended Application Equipment

Airless (A/L) Spray

                       Conventional Spray

: Tip Size: 0.018-0.021 inch Fluid Pressure: 2800 -3500 psi

: Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

                       Brush

: For touch-up only

Physical Properties

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

:

:

78 to 82%

1.5 to 1.9 kg/l

                                                     ©Saudi Arabian Oil Company, 2021

Page 407 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 12 Primer Sigmacover Primer 410 (Alu) (Cont’d)

4.3

4.4

4.5

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

Approved Color/s

: Aluminium Grey

12-17 dPa.s depending on color

20°C

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 408 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-12 Intermediate / Top Coat

Type of Coating

: Epoxy Topcoat: Polyamide-Cured

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name : SigmaCover 410

SAP M/N (SAMS S/N)

:

1000194629 Red Brown 1000194797 Light Grey 1000194960 Safety Yellow

RAL 8012 RAL 7038 RAL 1023

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

                                         :

2

        2.2

Mixing Ratio

2.3

Thinner

6823 Binder

6823 Hardener

: 80:20 (Base:Hardener) By volume

: Thinner 91-92

SAP M/N (SAMS S/N)

:

1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements :

0 to 10% by volume 30 to 40% for miscoat

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

4 hours @ 25°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10°C - 50⁰C

3.2 Minimum-Maximum Allowable Relative Humidity

:

n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

  :

  :

125 micrometers

100 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 409 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 12 Sigmacover 410 Intermediate / Top Coat (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

32 m2/L

3.6 Minimum Number of Coats

  :

2

         3.7

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum See note **

To Handle To Service Full Cure

                      10°C
                      20oC
                      30°C
                      40oC
                      50°C

24 Hours 14 Days 24 Hours None* 8 Hours 7 Days 8 Hours None* 6 Hours None* 6 Hours 5 Days 4 Hours None * 4 Hours 3 Days 3 Hours 3 Days 3 Hours None*

**

This product has an unlimitedrecoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resitance when all layers are fully cured, however is resistant to light handling and exposure to sun and rain at the dry to handle time.

      3.8

Recommended Application Equipment

Airless (A/L) Spray

                       Conventional Spray

                       Brush

4.

Physical Properties

: Tip Size: 0.018-0.021 inch Fluid Pressure: 2800 -3500 psi

: Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

: For touch-up only

4.1

4.2

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

4.3

Viscosity

(ASTM D562)

:

:

:

78 to 82%

1.5 to 1.9 kg/l

(12-17 dPa.s depending on color)

                                                            ©Saudi Arabian Oil Company, 2021

Page 410 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 12 Sigmacover 410 Intermediate / Top Coat (Cont’d)

4.4

4.5

Flash Point

(ASTM D93 or D56)

:

20⁰C

Approved Color/s:

 :     Red Brown RAL 8012,

Grey RAL 7038

Safety Yellow RAL 1023 (Other Color/s on request)

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 411 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A Primer

Type of Coating

: Epoxy Primer: Polyamide-Cured

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaCover 410 (Alu)

SAP M/N (SAMS S/N)

:

1000194626

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner SAP M/N (SAMS S/N)

: 2 : 6823 Base : 6823 Hardener

: 80:20 (Base : Hardener)

By volume

: Thinner 91-92 : 1000198455 (09-738-280)

2.4 Minimum-Maximum Thinning Requirements

: 0 to 10% by Volume

2.5

Induction Time

: Nil

2.6

Pot Life

Application

:

12 hours @ 10°C 6 hours @ 20°C 4 hours @ 25°C 3 hours @ 30°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 125 micrometers

                                                            ©Saudi Arabian Oil Company, 2021

Page 412 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A Primer – Sigmacover Primer 410 (Alu) (Cont’d)

3.4

Typical Dry Film Thickness Per Coat

: 100 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 32 m2/L

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: CS (non-ferrous possible)

3.8

Surface Preparation Requirements

3.9

Drying Time at specified DFT

: CS – ISO-8501-1 Sa 2½, blasting profile 40 – 70 µm (non-ferrous metals: sweep

blast)

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 24 hours 8 hours 6 hours 4 hours 3 hours

none* none* none* none* none*

To Handle

To Service see note **

Full cure

24 hours 8 hours 6 hours 4 hours 3 hours

14 days 7 days 5 days 3 days 3 days

**

This product has an unlimited recoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating. The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured; however, is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Tip Size: 0.018-0.021 inch Fluid Pressure: 2,800 - 3,500 psi

                                                     ©Saudi Arabian Oil Company, 2021

Page 413 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A Primer – Sigmacover Primer 410 (Alu) (Continued)

Conventional Spray:

Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

Brush:

For touch-up only

Physical Properties

4.1

Volume Solids (ASTM D2697)

: 78 to 82%

4.2

Product Weight (ASTM D1475)

: 1.5 to 1.9 kg/l

4.3

Viscosity (ASTM D562)

:

(12-17 dPa.s depending on color)

4.4

Flash Point (ASTM D93 or D56)

: 20⁰C

4.5

Approved Color/s

                               :  Aluminium Grey

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 414 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A Top Coat

Type of Coating

: Epoxy Topcoat, Polyamide-Cured

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaCover 410

SAP M/N (SAMS S/N)

:

RAL 8012 1000194629 Red Brown RAL 7038 Light Grey 1000194797 Safety Yellow RAL 1023 1000194960

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 year

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

   :   2

: 6823 Base : 6823 Hardener

2.2 Mixing Ratio

2.3

Thinner

: 80:20 (Base:Hardener) By volume

: Thinner 91-92

SAP M/N (SAMS S/N)

: 1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements

: 0 to 10% by volume

30 to 40% for mist-coat

2.5

Induction Time

: Nil

2.6

Pot Life

: 12 hours @ 10°C 6 hours @ 20°C 4 hours @ 25°C 3 hours @ 30°C 2 hours @ 40°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 415 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A Top Coat - SigmaCover 410 (Cont’d)

Application

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

: 125 micrometers

3.4

Typical Dry Film Thickness Per Coat

: 100 micrometers

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 32 m2/L

3.6 Minimum Number of Coats

: 2

3.7

Drying Time at specified DFT:

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 24 hours 8 hours 6 hours 4 hours 3 hours

none* none* none* none* none*

To Handle

To Service see note **

Full cure

24 hours 8 hours 6 hours 4 hours 3 hours

14 days 7 days 5 days 3 days 3 days

**

This product has an unlimited recoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating. The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured; however, is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.8

Recommended Application Equipment

Airless (A/L) Spray:

Tip Size: 0.018-0.021 inch Fluid Pressure: 2800 -3500 psi

                                                            ©Saudi Arabian Oil Company, 2021

Page 416 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-22A Top Coat - SigmaCover 410 (Cont’d)

Conventional Spray:

Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

Brush:

For touch-up only

Physical Properties

4.1

Volume Solids

(ASTM D2697)

: 78 to 82%

4.2

Product Weight

(ASTM D1475)

: 1.5 to 1.9 kg/l

4.3

Viscosity

(ASTM D562)

:

(12-17 dPa.s depending on color)

4.4

Flash Point

(ASTM D93 or D56) : 20⁰C

4.5

Approved Color/s:

1000194629 1000194797 1000194960

Red Brown RAL 8012 Light Grey RAL 7038 Safety Yellow RAL 1023 (Other Color/s on request)

4.6

Finish:

Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 417 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26 Primer / Top Coat

Type of Coating

: Epoxy Primer / Topcoat, Polyamide-Cured

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name

: SigmaCover 410 (Alu) – Primer / Sigmacover 410

SAP M/N (SAMS S/N)

:

1000194626 SigmaCover 410 (Alu) – primer RAL 8012 1000194629 Red Brown Light Grey 1000194797 RAL 7038 Safety Yellow RAL 1023 1000194960

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

: 1 years

Mixing

2.1

No. of Components 2.1.1 Base 2.1.2 Hardener (Curing Agent)

2.2 Mixing Ratio

2.3

Thinner

: 2 : 6823 Base : 6823 Hardener

: 80:20 (Base:Hardener) By volume

: Thinner 91-92

SAP M/N (SAMS S/N)

: 1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements

2.5

Induction Time

2.6

Pot Life

Application

: 0 to 10% by volume 30 to 40% for mist-coat

: Nil

: 4 hours @ 25°C 2 hours @ 40°C

3.1 Minimum-Maximum Allowable Substrate Temperature : 10°C - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

: n/a - 80%

                                                            ©Saudi Arabian Oil Company, 2021

Page 418 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26 Primer / Top Coat - SigmaCover 410 (Alu) / Sigmacover 410 (Cont’d)

3.3

Typical Wet Film Thickness Per Coat

: 190 micrometers

3.4

3.5

Typical Dry Film Thickness Per Coat

: 150 micrometers

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

3.6 Minimum Number of Coats

: 32 m2/L

: 2

         3.7

Applicable Substrate

: (CS, GS, SS etc.)

3.8

Surface Preparation Requirements

: (CS – ISO Sa 2½, GS, SS - Sweep blast)

3.9

Drying Time at specified DFT:

Substrate Temperature 10°C 20°C 30°C 40°C 50°C

Recoat Interval Minimum Maximum 24 hours 8 hours 6 hours 4 hours 3 hours

none* none* none* none* none*

To Handle

To Service see note **

Full cure

24 hours 8 hours 6 hours 4 hours 3 hours

14 days 7 days 5 days 3 days 3 days

**

This product has an unlimited recoating interval provided the surface is free from chalking and other contamination. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating. The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed. This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured; however, is resistant to light handling and exposure to sun and rain at the dry to handle time.

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Tip Size: 0.018-0.021 inch Fluid Pressure: 2,800 -3,500 psi

Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

Brush:

For touch-up only

                                                     ©Saudi Arabian Oil Company, 2021

Page 419 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26 Primer / Top Coat - SigmaCover 410 (Alu) / Sigmacover 410 (Cont’d)

Physical Properties

4.1

Volume Solids

(ASTM D2697)

: 78 to 82%

4.2

Product Weight

(ASTM D1475)

: 1.5 to 1.9 kg/l

4.3

Viscosity

(ASTM D562)

:

(12-17 dPa.s depending on color)

4.4

Flash Point

(ASTM D93 or D56) : 20⁰C

4.5

Approved Color/s:

1000194626 1000194629 1000194797 1000194960

SigmaCover 410 (Alu) – primer Red Brown RAL 8012 Light Grey RAL 7038 Safety Yellow RAL 1023 (Other Colors on request)

4.6

Finish:

Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 420 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 26T Primer / Intermediate

Type of Coating

: Polyamide Cured Epoxy Primer/Topcoat

Manufacturer

: Sigma Paints S.A. Ltd.

Product Name : SigmaCover 410 (Alu) – Primer / Sigmacover 410

SAP M/N (SAMS S/N)

:

1000194626 SigmaCover 410 (Alu) – primer 1000194629 Red Brown RAL 8012 1000194797 Light Grey RAL 7038 1000194960 Safety Yellow RAL 1023

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 year

Mixing

2.1

No. of Components : 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

2 6823 Base 6823 Hardener

        2.2

Mixing Ratio

2.3

Thinner

: 80:20 (Base:Hardener) By volume : Thinner 91-92

SAP M/N (SAMS S/N)

:

1000198452 (09-738-260)

2.4 Minimum-Maximum Thinning Requirements :

0 to 10% by volume 30 to 40% for mist-coat

2.5

Induction Time

: Nil

2.6

Pot Life

:

4 hours @ 25°C 2 hours @ 40°C

Application 3.1 Minimum-Maximum Allowable Substrate Temperature :

10 - 50°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

n/a - 80%

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

  :

  :

190 micrometers

150 micrometers

                                                     ©Saudi Arabian Oil Company, 2021

Page 421 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 26T Primer/Intermediate – SigmaCover 410 (Alu) / Sigmacover 410

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

32 m2/L

3.6 Minimum Number of Coats

  :

2

3.7

Applicable Substrate

: (CS, GS, SS )

3.8

Surface Preparation Requirements

: (CS – ISO Sa 2½, GS, SS - Sweep blast)

         3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum See notes*

To Handle To Service Full Cure

                      10°C
                      20oC
                      30°C
                      40oC
                      50°C

24 Hours 14 Days 24 Hours None* 7 Days 8 Hours 8 Hours None* 6 Hours None* 6 Hours 5 Days 4 Hours None * 4 Hours 3 Days 3 Hours 3 Days 3 Hours None*

*This product has an unlimitedrecoating interval provided the surface is free from chalking and other contamination.In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to assure adhesion of the subsequent coating .The optimum intercoat adhesion is obtained when the subsequent coating is applied before the full cure time of the previous coating has elapsed.

This product is part of a system, it will reach it maximum physical and chemical resistance when all layers are fully cured; however, is resistant to light handling and exposure to sun and rain at the dry to handle time.

. 3.10

Recommended Application Equipment

Airless (A/L) Spray

                       Conventional Spray

: Tip Size: 0.018-0.021 inch Fluid Pressure: 2800 -3500 psi

: Nozzle Size: 1.5 - 3 mm Nozzle Pressure: 43 - 57 psi

                       Brush

: For touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 422 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS 26T Primer/Intermediate – SigmaCover 410 (Alu) / Sigmacover 410

4.0.

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

78 to 82%

1.5 to 1.9 kg/l

12 to 17 dPa.s

20°C

4.5

Approved Color/s

: 1000194626 SigmaCover 410 (Alu) – primer 1000194629 Red Brown RAL 8012 1000194797 Light Grey RAL 7038 1000194960 Safety Yellow RAL 1023 (Other colours on request )

4.6

Finish

: Flat

                                                     ©Saudi Arabian Oil Company, 2021

Page 423 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A

Type of Coating

:

100% Solids Phenolic Epoxy

Manufacturer

: Sigma Paints Saudi Arabia Ltd.

Product Name

: Sigmaline 2000

SAP M/N (SAMS S/N)

:

1000686070 (09-000-497)

Storage

1.1 Shelf life, sheltered storage at 35°C maximum

:

1 year

2. Mixing

2.1 No. of Components

2.2 Mixing Ratio

2.3 Thinner

2.4 Thinning Requirements

2.5

Induction Time

2.6 Pot Life

Application

:

:

2

78:22 by volume; base: hardener

: None

: N/A

: Nil

:

50 minutes at 25°C 20 minutes at 40°C

3.1 Maximum Allowable Substrate Temperature

  :

70°C

      3.2      Minimum-Maximum Allowable Relative Humidity  :

n/a – 80%

3.3 Typical Wet Film Thickness Per Coat

  :

600 microns

3.4 Typical Dry Film Thickness (DFT) Per Coat

  :

550 microns

3.5 Theoretical Coverage at 25 Micrometers DFT

  :

40 M²/L

3.6 Minimum Number of Coats

  :

1

                                                            ©Saudi Arabian Oil Company, 2021

Page 424 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-113A - Sigmaline 2000 (Cont’d)

         3.7

Applicable Substrate

: CS.

3.8

Surface Preparation Requirements

ISO Sa2½ Blast profile 50 -100 microns

         3.9         Drying Time:

Substrate Temperature

To Handle Minimum Maximum

Water

Buried

Recoat Interval

To Immersion

10°C 30°C 50°C

30 Hours 10 Hours 4 Hours

1-½ Days 16 Hours 4 Hours

90 Days 30 Days 10 Days

1 Day 12 Hours 6 Hours

1 Day 7 Hours 4 Hours

3.10 Recommended Equipment

Airless Spray

: Tip Size: 0.021 inch

Fluid Pressure: 3,000 psi

Conventional Spray

: N/A

Brush

:

for touch-up, repairs, and stripe coating

Physical Properties

4.1 Volume Solids (ASTM D2697)

4.2 Product Weight (ASTM D1475)

4.3 Viscosity (ASTM D562)

4.4 Flash Point (ASTM D93 or D56)

:

:

:

:

100%

1.28 to 1.32 Kg/L

35 to 40 poise

65°C

                                                     ©Saudi Arabian Oil Company, 2021

Page 425 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

q. Super Therm – Approved Products

                  APCS-5A

SuperTherm *

*Note: Refer to coating manufacturer’s product date sheet.

                                                            ©Saudi Arabian Oil Company, 2021

Page 426 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

r.

Tesla – Approved Products

APCS-1B

Teslan 1101 ZN-CNT Low Voc Inorganic Zinc Primer: Solvent Based

Epoxy Primer

Teslan 3100 Low Voc Epoxy-CNT

Epoxy Topcoat

    Top Coat

APCS-22A

Teslan 1101 ZN-CNT Low Voc Inorganic Zinc Primer: Solvent Based

Epoxy Primer

Teslan 3100 Low Voc Epoxy-CNT

Epoxy Topcoat

Top Coat

                                                     ©Saudi Arabian Oil Company, 2021

Page 427 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A CNT-Primer

Type of Coating

: Zinc-CNT Epoxy primer, Solvent-based Nanocoatings

Manufacturer

: Tesla Nanocoatings Inc.

Product Name : Teslan 1101 ZN-CNT Low Voc Epoxy Primer

SAP M/N (SAMS S/N)

: 1000194560; 1000195239

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : 1101 – A 1101 – B 2.1.2 Hardener (Curing Agent) :

                                         :

2

        2.2

Mixing Ratio

: 4 Base : 1 Hardener

2.3

Thinner

: Teslan 0901 Type II Low

VOC Epoxy Reducer

SAP M/N (SAMS S/N)

:

1000198471

2.4 Minimum-Maximum Thinning Requirements :

0% up to 10 % by Volume

2.5

Induction Time

: None

2.6

Pot Life

Application

:

2 hrs @ 100oF/38oC 4 hrs @ 77oF/25oC 6 hrs @ 50oF/10oC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 50 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

40 – 90 %

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Microns (DFT)

  :

  :

  :

312 microns

200 microns

25.60 m2/L

                                                            ©Saudi Arabian Oil Company, 2021

Page 428 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A CNT-Primer - Teslan 1101 ZN-CNT Low Voc Epoxy Primer (Cont’d)

3.6 Minimum Number of Coats

: 1

3.7

Applicable Substrate

: Carbon Steel (CS), Galvanized Steel (GS)

3.8

Surface Preparation Requirements Carbon Steel (CS) - Immersion Service SSPC SP10/NACE 2 Near-White Blast Cleaning OR ISO8501-1 : Sa 2.5 Surface Profile: 2-4 mil (50-100 micron)

          (NOTE: Where blasting is not practical, and conditions allow, prepare surface per SSPC SP11
           Power Tool Cleaning to Bare Metal, achieving a minimum 2 mil (50 micron) profile).

Carbon Steel (CS) - Atmospheric Service SSPC SP6 /NACE 3 Commercial Blast OR ISO8501-1 : Sa 2 Surface Profile: 2-4 mil (50-100 micron)

          (NOTE: Where blasting is not practical, and conditions allow, prepare surface per SSPC SP15
           Commercial  Grade  Power  Tool  Cleaning,  or  an  ISO  St  3,  achieving  a  min.  2  mil  (50µm)

profile).

Galvanized Steel (GS) - Atmospheric Service

         ASTM  D6386  Standard  practice  for  preparation  of  zinc  (Hot-Dip  Galvanized)  coated

iron and steel product and hardware surfaces for Paint.

Surface Profile: 1.0 – 1.5 mil (25 – 125 micron)

3.9

Drying Time at specified DFT

        Substrate                     Recoat Interval            To Handle     To Service    Full Cure
     Temperature

Minimum Maximum

              10°C

1 hrs 6 months 24 hrs 10 days 10 days

              20oC               0.5 hrs                6 months          12 hrs             7 days           7 days

              30°C               0.5 hrs                6 months          10 hrs             7 days           7 days

              40oC               0.5 hrs                6 months            4 hrs             7 days           7 days

              50°C               0.5 hrs                6 months            2 hrs             7 days           7 days

• Topcoat/Overcoat can be applied over wet primer coat (wet-on-wet application). If wet on wet application method is not used, primed surface may need high pressure fresh water washing. The topcoat may then be applied to a clean, dry, and contaminate free primed surface.

                                                    ©Saudi Arabian Oil Company, 2021
  

Page 429 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A CNT-Primer - Teslan 1101 ZN-CNT Low Voc Epoxy Primer (Cont’d)

3.10 Recommended Application Equipment

Airless Spray

Pressure: Hose: Tip: Filter: Reduction:

3000-5000 psi (207-345 bar) 1/4 - 1/2 inches (6.4 - 13 mm) 0.017-0.021 inches (430-535 microns) Not Required As needed up to 10% by volume

Conventional Air-Spray

Air Pressure: 40-50 psi (2.8-3.4 bar) Material Pressure: 30-40 psi (2.1-2.8 bar) Hose: Tip Orifice: Air Cap: Filter: Reduction:

Minimum 3/8 inches (9.5 mm) 0.070 inches (1.8 mm) Pressure Feed High Atomization Combination Not Required As needed up to 10% by volume

Brush For areas where spray application is not feasible. Use a natural bristle brush.

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

:

64 ± 2 %

Product Weight

(ASTM D1475)

: A part 2.58Kg/L / B part 0.96Kg/L

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

100 Krebs Units

1101 – A 54.4°C / 1101 – B 39°C

4.5

Approved Color/s

: Dark Gray

4.6

Finish

: Semi-Gloss

 Special Instructions:

Mix component A and component B individually until a smooth uniform consistency is achieved using a powered agitator with a clean all steel spiral ribbon mixer. Slowly mix component B into component A while component A is under agitation. For additional information, consult Manufacturer Product Data Sheets.

                                                            ©Saudi Arabian Oil Company, 2021

Page 430 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A CNT-Topcoat

Type of Coating

: Epoxy-CNT Topcoat, Two-Component, Solvent-based Nanocoatings

Manufacturer

: Tesla Nanocoatings Inc.

Product Name : Teslan 3100 Low Voc Epoxy-CNT Topcoat

SAP M/N (SAMS S/N)

: 1000194565; 1000195273; 1000194568; 1000194590; 1000195277;

1000195314

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : 3100-A 3100-B 2.1.2 Hardener (Curing Agent) :

                                         :

2

        2.2

Mixing Ratio

: 1 (Base) : 1 (Hardener)

2.3

Thinner

: TESLAN 0901 Type II Low

VOC Epoxy Reducer

SAP M/N (SAMS S/N)

:

1000198471

2.4 Minimum-Maximum Thinning Requirements :

0% up to 10 % by Volume

2.5

Induction Time

: None

2.6

Pot Life

Application

:

2 hrs @ 100oF/38oC 4 hrs @ 77oF/25oC 6 hrs @ 50oF/10oC

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 50 °C

3.2 Minimum-Maximum Allowable Relative Humidity

:

40 – 90 %

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

350 microns

200 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 431 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS- 22A CNT-Topcoat - Teslan 3100 Low Voc Epoxy-CNT Topcoat (Cont’d)

3.5

Theoretical Coverage @ 25 Microns (DFT)

3.6 Minimum Number of Coats

3.7

Drying Time at specified DFT

  :

  :

23.20 m2/L

1

                Substrate                    Recoat Interval
             Temperature           Minimum

Maximum

        To Handle     To Service      Full Cure

                   10°C

1 hrs 6 months 24 hrs 10 days 10 days

                   20oC                       0.5 hrs               6 months             12 hrs               7 days            7 days

                   30°C                       0.5 hrs              6 months              10 hrs               7 days            7 days

                   40oC                       0.5 hrs               6 months               4 hrs               7 days            7 days

                   50°C                       0.5 hrs               6 months               2 hrs               7 days            7 days

• Topcoat/Overcoat can be applied over wet primer coat (wet-on-wet application). If wet on wet application method is not used, primed surface may need high pressure fresh water washing. The topcoat may then be applied to a clean, dry, and contaminate free primed surface.

3.8

Recommended Application Equipment

Airless Spray

Pressure: Hose: Tip: Filter: Reduction:

3000-5000 psi (207-345 bar) 1/4 - 1/2 inches (6.4 - 13 mm) 0.015-0.017 inches (381-431 microns) Not Required As needed up to 10% by volume

Conventional Air-Spray

40-50 psi (2.8-3.4 bar) Air Pressure: Material Pressure: 30-40 psi (2.1-2.8 bar) Hose: Tip Orifice: Air Cap: Filter: Reduction:

Minimum 3/8 inches (9.5 mm) 0.070 inches (1.8 mm) Pressure Feed High Atomization Combination Not Required As needed up to 10% by volume

Brush For areas where spray application is not feasible use of a natural bristle brush.

Manufacturer - Approved Saudi Aramco Data Sheet

                                                            ©Saudi Arabian Oil Company, 2021

Page 432 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

APCS- 22A CNT-Topcoat - Teslan 3100 Low Voc Epoxy-CNT Topcoat (Cont’d)

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

58 ± 2 %

3100-A 1.29 Kg/L 3100-B 1.33 Kg/L

70 Krebs Units

3100-A 4.4°C / 3100-B 54°C

4.5

Approved Color/s

: Gray

4.6

Finish

: Semi-Gloss

 Special Instructions:

Mix component A and component B individually until a smooth uniform consistency is achieved using a powered agitator with a clean all steel spiral ribbon mixer. Slowly mix component B into component A while component A is under agitation. For additional information, consult Manufacturer Product Data Sheets.

                                                     ©Saudi Arabian Oil Company, 2021

Page 433 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

s. Thermo-Shield – Approved Products

APCS-5A Tank Shield* Thermoshield Clear*

*Note: Refer to coating manufacturer’s product date sheet.

                                                            ©Saudi Arabian Oil Company, 2021

Page 434 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

t.

Tnemec – Approved Products

               APCS-1A

Tnemec-Zinc Series 90-98 Hi-Build Epoxoline Series 66

Inorganic Zinc Primer: Solvent Based Epoxy Topcoat

               APCS-1B

Hi-Build Epoxoline Series 66

Epoxy Primer and Topcoat

               APCS-1D

Use APCS-1A as primer and intermediate coat Endura-Shield Series 73

Polyurethane Topcoat

               APCS-1E

Use APCS-1B as primer and intermediate coat Use Polyurethane Topcoat of APCS-1D

               APCS-4
                      Chem-Prime H.S. Series 37H
                      Chrome Aluminum Series 43-36

Alkyd Primer Alkyd Topcoat

               APCS-6
                      Use Alkyd Primer of APCS-4 as primer
                      Hi-Build Tneme-Gloss Series 2H

Alkyd Topcoat

               APCS-12
                     Use APCS-1B as Primer and Topcoat

               APCS-26
                     Chembuild Series 135

Epoxy Mastic

             APCS-26T
                     Use APCS-26 as primer and Polyurethane Topcoat of APCS-1D as topcoat

                                                     ©Saudi Arabian Oil Company, 2021

Page 435 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D Primer

Type of Coating

:

Inorganic Zinc

Manufacturer

: Tnemec Company, Inc.

Product Name : Tneme-Zinc Series 90-98

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

1 years

Mixing

2.1

Two (liquid and zinc dust) No. of Components 2.1.1 Base : F090-0098A (liquid) and

                                         :

F090-0098B (zinc dust)

2.1.2 Hardener (Curing Agent) : N/A

2.2 Mixing Ratio

2.3

Thinner

: N/A

: F041-0018

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0–9% by Volume

2.5

Induction Time

: N/A

2.6

Pot Life

:

7 hours at 38°C

Application

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

30 – 85%

3.3

Typical Wet Film Thickness Per Coat

  :

100 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 436 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D Primer – Tneme-Zinc Series 90-98 (Cont’d)

3.4

3.5

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

65 microns

25.6 m2/L

3.6 Minimum Number of Coats

  :

One

3.7

Applicable Substrate

3.8

3.9

Surface Preparation Requirements

Drying Time at specified DFT

:

:

CS

SSPC-SP6 or SP10

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      30°C

                      50°C

36h

16h

16h

N/A

N/A

N/A

2h

1h

2h

1h

2h

1h

30m

30m

30m

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

2,000 - 3,000 psi, 535 – 585 micron tip

DeVillbis MBC, 30 – 40 psi

For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

65%

2.46 Kg/L

85 – 89 KU

12°C (Part A)

                                                     ©Saudi Arabian Oil Company, 2021

Page 437 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1D Primer – Tneme-Zinc Series 90-98 (Cont’d)

4.5

Approved Color/s

: Gray

4.6

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 438 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1D/1E

Type of Coating

: Polyamide Epoxy, Primer/Topcoat

Manufacturer

: Tnemec Co., Inc.

Product Name : Hi-Build Epoxoline Series 66

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years (Part A) 1 year (Part B)

Mixing

2.1

No. of Components 2.1.1 Base : F066-00WHA (white color) 2.1.2 Hardener (Curing Agent) :

                                         :

F066-0066B

Two

2.2 Mixing Ratio

2.3

Thinner

: 1 : 1 by volume

: F041-0004

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0 – 10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None @ >16°C

:

4 hours at 38°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 57°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 85%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

180 microns

100 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 439 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1D/1E - Hi-Build Epoxoline Series 66 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 22 m2/L

3.6 Minimum Number of Coats

: One

3.7

Applicable Substrate

: CS, GS, SS, Al, CI/DI,

Concrete

3.8

Surface Preparation Requirements

: SSPC-SP6 or SP10 (CS), SSPC-

SP13 (Concrete)

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

36h

Varies*

30h

16d

16d

                      20oC

                      30°C

10h

Varies*

8h

                      40oC

                      50°C

4h

Varies*

3h

5d

3d

5d

3d

• Maximum recoat window varies according to topcoat. Please see data sheet of applicable topcoat for more information. To recoat Series 66 with itself, the maximum recoat interval is 60 days for immersion and unlimited for non- immersion service.

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

3,000 – 4,000 psi, 380 - 485 micron tip

DeVillbiss JGA, 75 - 100 psi

For stripe coating / touch-up only

                                                            ©Saudi Arabian Oil Company, 2021

Page 440 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1A/1B/1D/1E - Hi-Build Epoxoline Series 66 (Cont’d)

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

4.4

Flash Point

(ASTM D93 or D56)

:

4.5

Approved Color/s

:

4.6

Finish

: Satin

56%

1.5 Kg/L

78 – 84 KU (Part A) 66 – 71 KU (Part B)

28°C (Part A) 18°C (Part B)

                                                     ©Saudi Arabian Oil Company, 2021

Page 441 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/26T Topcoat

Type of Coating

: Aliphatic Acrylic Polyurethane

Manufacturer

: Tnemec Co., Inc.

Product Name : Endura-Shield Series 73

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years (Part A) 1 year (Part B)

Mixing

2.1

                                         :

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

Two F073-11WHA (White) F073-0073B

2.2 Mixing Ratio

2.3

Thinner

: 4 : 1 by Volume

: F041-0048 or F041-0042

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0–10% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

:

2 hours at 38°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 80%

3.3

Typical Wet Film Thickness Per Coat

3.4

Typical Dry Film Thickness Per Coat

  :

  :

115 microns

65 microns

                                                            ©Saudi Arabian Oil Company, 2021

Page 442 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/26T Topcoat - Endura-Shield Series 73 (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

22.8 m2/L

3.6 Minimum Number of Coats

  :

One

3.7

Applicable Substrate

:

3.8

3.9

Surface Preparation Requirements

:

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      30°C

                      50°C

18h

12h

7h

Unlimited

12h

12h

12h

Unlimited

Unlimited

8h

5h

8h

5h

8h

5h

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

2700–3000 psi, 330-430 micron tip

DeVillbiss JGA, 75–90 psi

Small areas only

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

58%

1.45 Kg/L

105–115 KU (Part A) 19 seconds [#4 Ford Cup] (Part B)

4.4

Flash Point

(ASTM D93 or D56)

:

13°C (Part A) 40°C (Part A)

                                                     ©Saudi Arabian Oil Company, 2021

Page 443 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-1D/1E/26T Topcoat - Endura-Shield Series 73 (Cont’d)

4.5

Approved Color/s

:

4.6

Finish

: Semi-Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 444 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer

Type of Coating

: Phenolic Alkyd

Manufacturer

: Tnemec Co., Inc.

Product Name : Chem-Prime H.S. Series 37H

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : F037-0078 (Gray) 2.1.2 Hardener (Curing Agent) :

                                         :  One

2.2 Mixing Ratio

2.3

Thinner

:

: F041-0002

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0 – 9% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 80%

3.3

3.4

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

  :

  :

115 microns

65 microns

                                                     ©Saudi Arabian Oil Company, 2021

Page 445 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4/6 Primer - Chem-Prime H.S. Series 37H (Cont’d)

3.5

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

: 22.8 m2/L

3.6 Minimum Number of Coats

: One

3.7

3.8

Applicable Substrate

: CS, Cast/Ductile Iron

Surface Preparation Requirements

: SSPC-SP6

3.9

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      30°C

                      50°C

16h

12h

8h

Unlimited

Unlimited

Unlimited

4h

2h

1h

16h

12h

8h

16h

12h

8h

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

380–485 micron tip, 2,700 – 3,000 psi

DeVillbiss JGA Gun, 75 – 90 psi

For stripe coating / touch-up only

Physical Properties

4.1

4.2

4.3

4.4

4.5

4.6

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

58%

1.48–1.56 Kg/L

85–89 KU

18°C

Approved Color/s

:

Finish

: Flat

                                                            ©Saudi Arabian Oil Company, 2021

Page 446 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat

Type of Coating

: Alkyd Aluminum

Manufacturer

: Tnemec Co., Inc.

Product Name : Chrome Aluminum Series 43-36

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

                                         :  One

F043-0036

2.2 Mixing Ratio

2.3

Thinner

:

: F041-0001

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0 – 3.5% by Volume

2.5

2.6

Induction Time

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 80%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

75 microns

25 microns

14.55 m2/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 447 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-4 Topcoat - Chrome Aluminum Series 43-36 (Cont’d)

3.6 Minimum Number of Coats

  :

One

3.7

Applicable Substrate

3.8

3.9

Surface Preparation Requirements

Drying Time at specified DFT

CS

:

:

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      30°C

                      50°C

36h

24h

16h

24h

16h

8h

36h

24h

16h

36h

24h

16h

• Varies by topcoat

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

380 – 485 micron tip, 1,800 – 3,000 psi

DeVillbiss JGA or MBC, 60 – 80 psi

High quality nylon or synthetic

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

37%

3.54 Kg/L

50 – 54 KU

32°C

4.5

Approved Color/s

:

4.6

Finish

: Low Sheen

                                                            ©Saudi Arabian Oil Company, 2021

Page 448 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat

Type of Coating

: Alkyd

Manufacturer

: Tnemec Co., Inc.

Product Name : Hi-Build Tneme-Gloss Series 2H

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components 2.1.1 Base : 2.1.2 Hardener (Curing Agent) :

                                         :  One

F02H-11WH (White)

2.2 Mixing Ratio

2.3

Thinner

:

: F041-0001 or Mineral Spirits

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0–8% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None

: N/A

3.1 Minimum-Maximum Allowable Substrate Temperature :

10–49°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 80%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

75 microns

40 microns

19.3 m2/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 449 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-6 Topcoat - Hi-Build Tneme-Gloss Series 2H (Cont’d)

3.6 Minimum Number of Coats

  :

One

3.7

Applicable Substrate

3.8

3.9

Surface Preparation Requirements

Drying Time at specified DFT

CS, GS, SS

:

:

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      30°C

                      50°C

36h

24h

16h

24h

16h

8h

36h

24h

16h

36h

24h

16h

• Varies by topcoat

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

330 – 430 micron tip, 2,800 – 3,500 psi

DeVillbiss JGA or MBC, 40 – 70 psi

High quality natural or synthetic

Physical Properties

4.1

4.2

4.3

4.4

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

Flash Point

(ASTM D93 or D56)

:

:

:

:

49%

4.35 Kg/L

86–95 KU

38°C

4.5

Approved Color/s

:

4.6

Finish

: Gloss

                                                            ©Saudi Arabian Oil Company, 2021

Page 450 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26/26T

Type of Coating

: Modified Polyamidoamine Epoxy

Manufacturer

: Tnemec Co., Inc.

Product Name : Chembuild Series 135

SAP M/N (SAMS S/N)

:

Storage

1.1

Shelf life, sheltered storage @ 35°C maximum

:

2 years

Mixing

2.1

No. of Components : 2.1.1 Base : F135-DC74A (White) 2.1.2 Hardener (Curing Agent) :

F135-0135B

Two

2.2 Mixing Ratio

2.3

Thinner

: 4 : 1

: F041-0062

SAP M/N (SAMS S/N)

:

2.4 Minimum-Maximum Thinning Requirements :

0–15% by Volume

2.5

Induction Time

2.6

Pot Life

Application

: None @ >16°C

:

2 hours at 38°C

3.1 Minimum-Maximum Allowable Substrate Temperature :

10 – 57°C

3.2 Minimum-Maximum Allowable Relative Humidity

:

0 – 80%

3.3

3.4

3.5

Typical Wet Film Thickness Per Coat

Typical Dry Film Thickness Per Coat

Theoretical Coverage @ 25 Micrometers Dry Film Thickness

  :

  :

  :

150 microns

125 microns

33.1 m2/L

                                                     ©Saudi Arabian Oil Company, 2021

Page 451 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Manufacturer - Approved Saudi Aramco Data Sheet

APCS-26/26T - Chembuild Series 135 (Cont’d)

3.6 Minimum Number of Coats

: One

3.7

Applicable Substrate

: CS, GS, Previously Painted

3.8

3.9

Surface Preparation Requirements

: SSPC-SP6, or SSPC-SP2/SP3

Drying Time at specified DFT

                  Substrate                        Recoat Interval
               Temperature

Minimum Maximum

To Handle To Service Full Cure

                      10°C

                      30°C

                      50°C

48h

24h

12h

60d

60d

60d

36h

18h

9h

48h

24h

12h

48h

24h

12h

3.10 Recommended Application Equipment

Airless (A/L) Spray:

Conventional Spray:

Brush:

3,000 – 4,200 psi, 430 – 435 micron tip

DeVillbis JGA gun, 70 – 90 psi

Use high quality brushes only

Physical Properties

4.1

4.2

4.3

Volume Solids

(ASTM D2697)

Product Weight

(ASTM D1475)

Viscosity

(ASTM D562)

:

:

:

4.4

Flash Point

(ASTM D93 or D56)

:

4.5

Approved Color/s

:

4.6

Finish

: Semi-Gloss

84%

1.38 – 1.47 Kg/L

84 – 94 KU (Part A) 58 – 105 KU (Part B)

24°C (Part A) 94°C (Part B)

                                                            ©Saudi Arabian Oil Company, 2021

Page 452 of 453

Saudi Aramco: Company General Use

Document Responsibility: Paints and Coatings Standards Committee Issue Date: 30 June 2021 Next Planned Update: 30 June 2026

Approved Saudi Aramco Data Sheets - Paints and Coatings

SAES-H-101V

Document History

30 June 2021

Major revision. Clarified the standard’s requirements, added relevant references, provided approved coatings list by APCS, updated information in existing data sheets, added recently qualified coatings and corresponding data sheets, and included approved new coating technologies.

16 October 2017

Major revision. Enhance the data sheets and update the list of approved protective liquid coatings and manufacturers for SAES-H-001, SAES-H-002, SAES-H-003, and SAES-H-004.

                                                     ©Saudi Arabian Oil Company, 2021

Page 453 of 453

Saudi Aramco: Company General Use

Project: Q-31108 - Tecnicas - Riyas Folder: RFQ Files