RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 1 OF 8
ADNOC GAS
Instruction to Vendor - Declaration of Conformity for EMC
COMPANY Contract No.
4700022871
JV TJN RUWAIS Contract No
215122C
Document Class
Class 3
Document Category (for Class 1)
NA
OPERATING CENTER Contract No.
OPERATING CENTER Doc Ref.
SR-000-13808-0803
1
Issued for Construction
27-Aug-2024
K.M.M.Raja
E. Papeil S. Pandey A. Ghosh
M.Sano / I.Sawaki
Rev.
Revision Purpose
Date
Prepared by
Checked by Approved by
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
1 / 8
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 2 OF 8
Table of Contents
Contents
Page
1.0 1.1 1.2 2.0 2.1 2.2 3.0 4.0 4.1 5.0
INTRODUCTION … 4 Purpose … 4 Holds List … 4 REFERENCES … 5 Codes and Standards. … 5 Project Documents. … 5 DEFINITIONS … 5 GENERAL REQUIREMENT … 5 Electromagnetic Compatibility (EMC) … 5 ATTACHMENT … 5
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
2 / 8
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 3 OF 8
Table of Changes compared to previous revision
Paragraph
Modification description
Remarks / Origin
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
3 / 8
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 4 OF 8
1.0
INTRODUCTION
The ADNOC Ruwais LNG Project is a two train, near net-zero electrically driven LNG facility, targeting international markets. The feed gas for the project is supplied from the Habshan Gas Processing Plant via a new export gas pipeline. The plant will have two 4.8 MTPA (nominal capacity) electric driven LNG Trains with associated LNG storage/marine export facilities and utilities.
Figure 1 – Project Context
The ADNOC Ruwais LNG Project foresees the following main components at the facility:
Onshore LNG Liquefaction facilities for 2 x 4.8 MTPA electrically driven LNG Trains (9.6MTPA total)
Common facilities including inlet receiving facilities, LNG storage, BOG handling, flare, refrigerant
storage and support buildings.
Utilities to support the facilities including import power from the national grid.
Marine facilities for LNG export and bunkering.
1.1
Purpose
This instruction covers the procedure for submission of “System EMC Check List”, “Declaration of Conformity for EMC” for the ADNOC Ruwais LNG Project.
1.2
Holds List
To be updated requirement in accordance with EMC assessment.
HOLD
DESCRIPTION
1
2
3
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
4 / 8
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 5 OF 8
2.0
REFERENCES
2.1
Codes and Standards.
IEC 61000
Electromagnetic Compatibility (EMC) – All Parts
2.2
Project Documents.
RLNG-000-EL-BOD-0001
Electrical Design Basis
AGES-GL-02-001
Electrical Engineering Design Guide
3.0
DEFINITIONS
COMPANY
CONTRACTOR
EPC ADOC POC YOC
ABU DHABI NATIONAL OIL COMPANY (ADNOC) P.J.S.C. TJN Ruwais, Joint Venture of Technip Energies France-Abu Dhabi, JGC Corporation and National Marines Dredging Company (NMDC) Engineering Procurement Construction Abu Dhabi Operating Center - National Marines Dredging Company Paris Operating Center - Technip Energies Yokohama Operating Center - JGC Corporation
4.0
GENERAL REQUIREMENT
4.1
Electromagnetic Compatibility (EMC)
EMC levels should be based on the industrial level in accordance with IEC 61000-6-4 for emission and IEC 61000-6-2 for immunity. For other EMC requirement shall be followed each equipment specification and data sheet. Any deviations from the generic industrial standards are to be indicated in the EMC check list.
Vendor shall provide the evidence that the equipment complies with the appropriate EMC requirement such as “System EMC Check List “and “Declaration of Conformity for EMC”.
5.0
ATTACHMENT
Attachment- 1: System EMC Check List
Attachment- 2: Declaration of Conformity for EMC
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
5 / 8
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 6 OF 8
Attachment- 1: System EMC Check List
System list
PO number System description
Location/ WBS
Vendor
XX- YYYY- ZZZ
EMC requirements IEC 61000-6-4 (emission) IEC 61000-6-2 (immunity)
Reference Project Specification doc. reference
Major items containing electrical/electronic equipment
Sl.No Description of
equipment
VSD Electrical motor PLC (Controller)
Compliance Reference
YES NO
Doc no.
Doc no.
Further description
Not applicable
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
6 / 8
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 7 OF 8
Compliance
YES
NO
Attachment- 2: Declaration of Conformity for EMC
DECLARATION OF CONFORMITY
We: Address:
Name of Manufacturer Address of Manufacturer
hereby declare that the system/equipment: Equipment: Model No.: Serial No.:
Description of system/equipment Model name/number Serial number
is in conformity with the applicable requirements of the following standards:
Standard
Title
IEC 61000-6-4 Note 1
IEC 61000-6-2 Note 1
Other standards Note 2
Electromagnetic compatibility (EMC) – Part 6.4: Generic standards – Emission for industrial environments Electromagnetic compatibility (EMC) – Part 6.2: Generic standards – Immunity for industrial environments
In accordance with the following Directive: 2014/30/EU
Electromagnetic Compatibility (EMC) Directive
Applicable conditions
Reference document
Ref. document to be included (e.g. installation manual) Ref. document to be included (e.g. test report) Ref. document to be included (e.g. equipment and/or software settings)
Installation requirements Note 3 Performance criteria Note 4
Other technical documentation Note 5
Date and Place of issue:
Signature:
Name: Position:
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
7 / 8
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
RUWAIS LNG PROJECT
INSTRUCTION TO VENDOR - DECLARATION OF CONFORMITY FOR EMC
COMPANY DOCUMENT REF. CONTRACTOR DOC. REF.
RLNG-000-EL-PP-5003 215122C-000-PP-1600-5003
REVISION: 1
PAGE 8 OF 8
Notes:
- Generally, the generic standards for emission and immunity for industrial environments are
applicable.
- Product standards with limits and levels equivalent to those of the generic industrial standards may be applied, e.g. for emission in accordance with IEC CISPR 11, class A, group 1. Where deviating levels from the generic standards are used, applicable EMC installation conditions are to be specified to comply with the appropriate EM zones.
In this context, due attention is required for product standards IEC 61800-3 for VSD (Variable Speed Drive) and IEC 62040-2 (Uninterruptible Power Supply), which may specify significantly higher emission levels, and which may require the implementation of an EMC plan.
-
Any installation requirements with regards to cable lengths, type of cables, cable shielding and segregation,additional filters, earthing arrangement or other EMC installation condition in order to comply with the specified standard(s).
-
Refer to description of Performance Criteria in IEC 61000-6-2.
-
Specific settings of equipment such as data rates, inverter switching frequencies etc. may be
applicable to comply with the specified standard(s).
The terms of Contract / Agreement No: CON22-146 shall apply for any disclosure of this document to any third party.
8 / 8
J-DMS 29-Aug-2024 UNCONTROLLED WHEN PRINTED
Project: Q-32859 - NMDC - Ruwais Folder: RFQ Files