RUWAIS LNG PROJECT
APPLICABLE CODES AND STANDARDS
COMPANY Document Ref
CONTRACTOR Document Ref
RLNG-000-PM-PP-2000
215122C-000-PP-2000
REVISION : 0
PAGE 1 of 54
ADNOC GAS
APPLICABLE CODE AND STANDARDS
COMPANY Contract No.
4700022871
TJN RUWAIS Contract No.
215122C
Document Class
Document Category (for Class 1)
Class 2
NA
OPERATING CENTER Contract No.
OPERATING CENTER Doc Ref.
0
Rev.
ICR
23-Aug-2024
S.Deilles
A. De Vandiere T. Sakamoto M. Vallivel
K. Fujii
Revision Purpose
Date
Prepared by
Checked by
Approved by
DOCUMENT REVISIONS
THE TERMS OF CONTRACT / AGREEMENT NO: [INSERT AGREEMENT NUMBER] SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY. Page 1/54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
0
Rev.
23-Aug-2024
Rev. Date
NOTES:
-
This document lists the codes and standards applicable to the design of the Ruwais LNG Project.
-
For each code and standard, the current version at the Effective Date of the Contract (31-May-2024) is listed. Where no version is listed, the version at the Effective Date of the Contract applies anyway.
-
The order of precedence between codes and standards and other Project Documentations or regulations is provided in Project Basis of Design (RLNG-000-PM-BOD-2002), section titled Order of Precedence
-
This list of Codes and Standards are deemed to be the minimum list for the CONTRACTOR’s scope. The list may be complemented by the Codes and Standards included in the Project Specifications. If CONTRACTOR identifies any areas not covered by the listed codes, CONTRACTOR shall propose appropriate standards for COMPANY’s approval.
-
TRANSCO Specifications are included. This listing is applicable for the design of the 400 kV substation scope only and ‘for the reference’ of required interfaces with CONTRACTOR’s scope.
-
As a mater of tracability, Codes and Standards which have been listed during the FEED Dossier (359665-0809-070-LS-9999-001) and which are not applicable to CONTRACTOR ‘s scope, have been kept and marked as “Not Applicable”. Other modifications like change in revision date or delettion of duplicated Codes and Standards are not identified.
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 2 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
Local Law or Regulation
Item
Discipline
Local Law or Regulation
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
UAE Law
Decree
UAE Law
UAE Law
UAE Law
UAE Law
UAE Law
UAE Law
Regulation
Regulation
UAE Law
UAE Law
UAE Ministerial Order
UAE Ministerial Order
FOIZ Code
FOIZ Code
FOIZ Code
FOIZ Code
FOIZ Code
FOIZ Code
FOIZ Code
FOIZ Code
Federal Law No 24 Protection and Development of the Environment
Council and Ministers Decree No. 12 of 2006 Regulation Concerning Protection of the Air from Pollution
Federal Law No. 21 of 1981 for “General Authority for Water Resources Management.
Federal Law No. 5 of 2016 Groundwater
Federal Law No. 12 of 2018 Integrated Waste Management.
Federal Law No. 20 of 2006 Radioactive materials and their use
Conservation of aquatic life is regulated by the Federal Law No. 23 of 1999.
Federal Law No. 21 of 2005 Waste Management.
FEA Regulation – Protection of Maritime Environment.
FEA – Ambient Air Quality Standards.
Law No. 1 (1988) Establishing the Supreme Petroleum Council (SPC).
Federal Law No. 8 (1980) UAE Labour Law and its Amendments Chapter V: Safety, Protection, and the Health and Social Care of the Employees; Article (91). UAE Ministerial Order No. (32), 1982. Specifying Preventive Methods and Measures for Protecting Workers against Work Hazards. UAE Ministerial Order No. (37/2), 1982. Establishing the level of medical attention the employer is obliged to provide to his workers.
FOIZ-COP-001 Leadership Commitment and Accountability
FOIZ-COP-002 Policy Standards and Objectives
FOIZ-COP-003 Organisation Resources and Capability
FOIZ-COP-004 Stakeholder Engagement
FOIZ-COP-005 Risk Assessment and Control
FOIZ-COP-007 HSEQ and Emergency Response Planning
FOIZ-COP-008 Execution of Activities
FOIZ-COP-009 HSEQ Assurance
0
Rev.
23-Aug-2024
Rev. Date
Remarks
Date
1999
2006
1981
2016
2018
2006
1999
2005
1988
1980
1982
1982
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 3 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
AA ADM
Aluminium Design Manual
AASHTO GDPS
Design of Pavement Structures
AASHTO GL-7
Roadway Lighting Design Guide
AASHTO LRFDBDS
LRFD Bridge Design Specifications
AASHTO M 147
Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses
AASHTO M 156
Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
AASHTO M 180
Corrugated Sheet Steel Beams for Highway Guardrail
AASHTO M 288
Geosynthetic Specification for Highway Applications
AASHTO M 82
Standard Specification for Cut-Back Asphalt (Medium Curing Type)
AASHTO T 104
Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate
AASHTO T 176
Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
2020
1993
2018
2020
2017 (R 2021)
2013 (R 2021)
2018 (R 2021)
2022
2017 (R 2021)
2022
2022
AASHTO T 180
Standard Method of Test for Moisture–Density Relations of Soils using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
2022
AASHTO T 191
Density of Soil In-Place by the Sand-Cone Method
AASHTO T 193
The California Bearing Ratio
AASHTO T 242
Frictional Properties of Paved Surfaces using Full Scale Tire
AASHTO T 259
Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration
AASHTO T 260
Standard Method of Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials
AASHTO T 267
Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition
AASHTO T 385
Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO T 89
Determining the Liquid Limit of Soils
AASHTO T 90
Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T 96
Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
AASHTO VLVLR-2
Geometric Design of Low Volume Roads
ACI 117
Standard Specifications for Tolerances for Concrete Construction and Materials and Commentary
ACI 207.1R-05
Guide to Mass Concrete. Reported by ACI Committee 207
ACI 212.3R
Report on Chemical Admixtures for Concrete
ACI 214.4R-10
Guide for Obtaining Cores and Interpreting Compressive Strength Results
ACI 224.3
Joints in Concrete Construction
ACI 301
Specifications for Structural Concrete
ACI 302.1R
Guide for Concrete Floor and Slab Construction
ACI 302.1R
Guide for Concrete Floor and Slab Construction
ACI 304.2R
Guide to Placing Concrete by Pumping Methods
ACI 304R
ACI 304R
ACI 305.1
ACI 305R
ACI 306R
Guide for Measuring, Mixing, Transportation and Placing of Concrete
Guide for Measuring, Mixing, Transporting and Placing Concrete
Specification for Hot Weather Concreting
Hot Weather Concreting
Cold Weather Concreting
2014 (R 2022)
2022
2018 (R 2022)
2002 (R 2021)
2021
2022
2019
2022
2022
2022
2019
2010 (R 2015)
2021
2016
2021
2008
2020
2015
2015
2017
2000 (R 2009)
2000 (R 2009)
2014
2020
2016
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 4 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
ACI 308.1
ACI 308R
Standard Specification for Curing Concrete
Guide to External Curing of Concrete. Reported by ACI Committee 308
ACI 311.4R
Guide for Concrete Inspection
ACI 318
ACI 318
Building Code Requirements for Structural Concrete
Building Code Requirement for Structural Concrete and Commentary
ACI 318R
Building Code Requirements for Structural Concrete, Commentary
ACI 336.2R
Suggested Analysis and Design Procedures for Combined Footings and Mats
ACI 347R
Guide to Formwork for Concrete
ACI 350
Code requirements for Environmental Engineering Concrete Structures and Commentary
2011
2016
2005
2019
2019
2019
1988 (R 2002)
2014 (R 2021)
2020
ACI 350.1M
Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures & Commentary
2010
ACI 357R-84
Guide for the Design and Construction of Fixed Offshore Concrete Structures
ACI 372R
Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures
ACI 506.2
Specifications for Shotcrete
ACI 543R
Guide to Design, Manufacture, and Installation of Concrete Piles
ACI 550.2R
Design Guide for Connections in Precast Jointed Systems
ACI CODE-355.2
Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary
ACI MNL-66
ACI Detailing Manual
ACI PRC-211.1
Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete
ACI PRC-211.1
Selecting Proportions for Normal-Density and High Density Concrete – Guide
ADIBC
AISC 303
AISC 325
AISC 326
AISC 341
Abu Dhabi International Building Code
Code of Standard Practice for Steel Buildings and Bridge
Steel Construction Manual, as specified in Chapter 35 of the adopted IBC
Detailing for Steel Construction
Seismic Provisions for Structural Steel Buildings
AISC 341-05 with supplement 1
Seismic Provisions for Structural Steel Buildings (or use version as required to meet all applicable building codes)
AISC 360
Specification for Structural Steel Buildings
AISC P700
Guide to Design Criteria for Bolted and Riveted Joints - 2nd Edition
API RP 13B-1
Field Testing Water-based Drilling Fluids
API RP 13B-2 ADD 1
Recommended Practice for Field Testing Oil-based Drilling Fluids
1997
2013
2018
2012
2013
2022
2020
2022
2022
2013
2016
2017
2009
2016
2016
2016
2002
2019
2014
API RP 2A-WSD
Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms - Working Stress Design
2014 (R 2020)
API SPEC 2B
Specification for the Fabrication of Structural Steel Pipe
2020
ASCE 4-98
Seismic analysis of Safety Related Nuclear Structures and Commentary
2016 (2017)
ASCE 7-05
Minimum Design Loads for Buildings and Other Structures with Supplement 1
ASCE 7-22
Minimum Design Loads and Associated Criteria for Buildings and Other Structures
ASHRAE 110
Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 62
Ventilation for Acceptable Indoor Air Quality
ASHRAE 90443
Thermal Guidelines for data Processing Environments
2022
2022
2016
2021
2021
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 5 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
ASHRAE 90453
Thermal Guidelines for data Processing Environments
ASHRAE APPLICATIONS IP HANDBOOK
ASHRAE Handbook - HVAC Applications
ASHRAE EQUIP IP HDBK
ASHRAE Handbook - HVAC Systems & Equipment
ASHRAE FUNDAMENTALS IP
ASHRAE Handbook – Fundamentals
ASHRAE, Refrigeration IP
Refrigeration IP
ASME B1.1
Unified Inch Screw Threads
ASNT SNT-TC-1A
Recommended Practice No. SNT-TC-1A: Personnel Qualification and Certification in Non- destructive Testing, and ASNT-CP- 105: Standard Topical Outlines for Qualification of Non- destructive Testing Personnel
ASTM A1001
Standard Specification for High Strength Steel Castings in Heavy Sections
ASTM A1011/A1011M Rev A
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A105/A105M
Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A106/A106M Rev A
Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A1064/A1064M Rev A
Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A108
Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A123/A123M
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
2021
2019
2006
2021
2006
2019
2020
2018
2018
2021
2019
2018
2018
2017
ASTM A143/A143M
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
2007 (R 2020)
ASTM A153/A153M Rev A
Standard Specification for Zinc Coating (Hot Dip) on Iron and Steel Hardware
ASTM A193/A193M
Standard Specification for Alloy Steel and Stainless-Steel Bolting for High Temperature or High- pressure Service and Other Special Purpose Applications
ASTM A194/A194M
Standard Specification for Carbon Steel, Alloy Steel, and Stainless- Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A252/A252M
Standard Specification for Welded and Seamless Steel Pipe Piles
ASTM A320/A320M
Standard Specification for Alloy-Steel and Stainless-Steel Bolting for Low-Temperature Service
ASTM A36/A36M
Standard Specification for Carbon Structural Steel
2016
2022
2022
2019
2022
2019
ASTM A384/A384M
Standard Practice for Safeguarding Against Warpage and Distortion during Hot-Dip Galvanizing of Steel Assemblies
2007 (R 2019)
ASTM A385/385M
Zinc Coatings (hot-dip) on Assembled Steel Products
ASTM A385/A385M
Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A421/421M
Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
ASTM A463/463M
Steel Sheet Aluminium-Coated by the Hot-Dip Process
ASTM A48/A48M
Standard Specification for Gray Iron Castings
ASTM A500/A500M Rev A
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A501/A501M
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
ASTM A510/A510M
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
ASTM A53/A53M
Standard Specification for Pipe, Steel, Black and Hot-dipped, Zinc coated, Welded and Seamless.
ASTM A53/A53M
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A563 Rev A
Carbon and Alloy Steel Nuts
ASTM A563/A563M Rev A
Standard Specification for Carbon and Alloy Steel Nuts
ASTM A572/A572M
Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
2020
2020
2021
2015 (R 2020)
2022
2021
2021
2020
2022
2022
2021
2021 (E 2022)
2021 (E 2021)
ASTM A6/A6M
Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Pilings
2021
ASTM A615/615M Rev B
Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
2020
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 6 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
ASTM A615/A615M
Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM A615/A615M
Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
ASTM A673/673M
Sampling Procedure for Impact Testing of Structural Steel
ASTM A673/A673M
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
ASTM A706/A706M
Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
ASTM A706/A706M
Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
ASTM A722/A722M
Uncoated High-Strength Steel Bar for Prestressing Concrete
ASTM A74
Standard Specification for Cast Iron Soil Pipe and Fittings
ASTM A746
Standard Specification for Ductile Iron Gravity Sewer Pipe
ASTM A759
Standard Specification for Carbon Steel Crane Rails
2022
2022
2017
2017
2022
2016
2018
2021
2018 (R 2022)
2021
ASTM A764
Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs.
2007 (R 2021)
ASTM A780/780M
Standard Practice for Repair of Damaged and Uncoated Areas of Hot Dip Galvanized Coating
ASTM A780/A780M
Standard Specification for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
2020
2020
ASTM A786/A786M
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy and Alloy Steel Floor Plates
2015 (R 2021)
ASTM A821/821M
Steel Wire Hard Drawn for Prestressing Concrete Tanks
ASTM A992/A992M
Standard Specification for Structural steel Shapes
ASTM B209/B209M
Standard Specification for Aluminium and Aluminium-Alloy Sheet and Plate
2021
2022
2021
ASTM C1007
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
2020
ASTM C1012/C1012M Rev B
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to Sulphate Solution
2018
ASTM C1017/C1017M
Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
2013 (E 2015)
ASTM C1077
Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
2017
ASTM C109/C109M
Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens)
2021
ASTM C1105 Rev A
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
ASTM C1107/C1107M
Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
ASTM C1116/C1116M Rev A
Standard Specification for Fibber-Reinforced Concrete and Shotcrete
2008 (R 2016)
2020
2010 (R 2015)
ASTM C1181/C1181M
Standard Test Methods for Compressive Creep of Chemical- Resistant Polymer Machinery Grouts
2017
ASTM C1202
Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
ASTM C1218/C1218M
Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
ASTM C1260
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM C127
Standard Test Method for Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
ASTM C1339/C1339M
Standard Test Method for Flowability and Bearing Area of Chemical- Resistant Polymer Machinery Grouts
ASTM C136/C136M
Sieve Analysis of Fine and Coarse Aggregates
ASTM C138/C138M Rev A
Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C142/C142M
Standard Test Method for Clay Lumps and friable Particles in Aggregates
ASTM C143/143M
Slump of Hydraulic Cement Concrete
ASTM C143/C143M
Standard Test Method for Slump of Hydraulic Cement Concrete
ASTM C1433M
Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
2022 (E 2022)
2020
2021
2015
2018
2019
2017
2017
2020
2020
2022
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 7 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
ASTM C1479/C1479M
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
ASTM C14M
Standard Specification for Non-reinforced Concrete Sewer, Storm Drain, and Culvert Pipe
ASTM C150/150M
Specification for Portland Cement
ASTM C150/C150M
Standard Specification for Portland cement
ASTM C1513
Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
ASTM C1577
Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains and Sewer Designed According to AASHTO LRFD
ASTM C1582/C1582M
Standard Specification for Admixtures to Inhibit Chloride- Induced Corrosion of Reinforcing Steel in Concrete
ASTM C1602/C1602M
Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
2022
2020
2021
2022
2018
2020 (E 2022)
2011 (R 2017) (E 2017)
2022
ASTM C1675
Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
2022
ASTM C1821/C1821M
Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
ASTM C232/C232M
Standard Test Methods for Bleeding Concrete
ASTM C260/260M
Air-Entraining Admixtures for Concrete
ASTM C260/C260M Rev A
Standard Specification for Air-Entraining Admixtures for Concrete
ASTM C29/C29M Rev A
Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
ASTM C295/C295M
Standard Guide for Petrographic Examination of Aggregates for Concrete
ASTM C309
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
ASTM C31/C31M
Standard Practice for Making and Curing Concrete Test Specimen in the Field
ASTM C33/C33M
Standard Specification for Concrete Aggregates
ASTM C33/C33M
Standard Specification for Concrete Aggregates
ASTM C330/C330M Rev A
Standard Specification for Lightweight Aggregates for Structural Concrete
ASTM C39/39M
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C40/C40M
Standard Test Method of Organic Impurities in Fine Aggregates for Concrete
ASTM C42/C42M
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C443M
Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
ASTM C478/C478M
Standard Specification for Circular Precast Reinforced Concrete Manhole Sections
2016 (R 2021) (E 2021)
2021
2010 (R 2016)
2010 (R 2016)
2017
2019
2019
2021
2018
2018
2017
2021
2021
2021
2020
2020
2021
2022
ASTM C490/C490M
Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
2021
ASTM C494/C494M
Standard Specification for Chemical Admixtures for Concrete
ASTM C497
Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical- Resistant Mortars, Grouts, Monolithic Surfacing’s, and Polymer Concretes
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
2016
ASTM C549
Perlite Loose Fill Insulation
ASTM C564 Rev A
Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
Standard Test Methods for Compressive Strength of Chemical- Resistant Mortars, Grouts, Monolithic Surfacing’s, and Polymer Concretes
Standard Test Method for Flexure Strength and Modulus of Elasticity of Chemical Resistant Mortars, Grouts, Monolithic Surfacing’s and Polymer Concretes.
Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method)
2019
ASTM C531
ASTM C535
ASTM C579
ASTM C580
ASTM C586
2019 (E 2022)
2020 (E 2020)
2018
2018
2020
2018
2018
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 8 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
ASTM C642
Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
ASTM C76 Rev A
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C827/C827M
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
2021
2022
2016
ASTM C836/C836M
Standard Specification for High Solids Content, Cold Liquid- Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
2018 (R 2022)
ASTM C87/C87M
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ASTM C88/C88M
Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
2017
2018
ASTM C882/C882M
Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
2020
ASTM C913
Standard Specification for Precast Concrete Water and Wastewater Structures
ASTM C939/C939M Rev A
Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C94/C94M Rev A
Standard Specification for Ready-Mixed Concrete
2021
2016
2022
ASTM C944/C944M
Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
2019
ASTM C953
ASTM C954
ASTM C969M
Standard Test Method for Time of Setting of Grouts for Preplaced- Aggregate Concrete in the Laboratory
Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
2017
2022
Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
2019
ASTM C979/C979M
Standard Specification for Pigments for Integrally Colored Concrete
ASTM C989/C989M
Standard Specification for Slag Cement for Use in Concrete and mortars
2016
2022
ASTM C990
ASTM D 2321
ASTM D1000
Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
2009 (R 2019)
Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D1004
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
ASTM D1073
Standard Specification for Fine Aggregate for Asphalt Paving Mixtures
ASTM D1143/D1143M
Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D1188/D1188M
Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1241
Materials for Soil-Aggregate Subbase Base and Surface Courses
ASTM D1248
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM D1505
Standard Test Method for Density of Plastics by Density-Gradient Technique
ASTM D1556/D1556M
Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
ASTM D1557
ASTM D1751
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Non-extruding and Resilient Bituminous Types)
ASTM D1785 Rev A
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80,and 120
ASTM D2027/D2027M
Standard Specification for Cutback Asphalt (Medium-Curing Type)
ASTM D2113
Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM D2216
Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ASTM D2241
Standard Specification for Poly (Vinyl Chloride (PVC) Pressure-Rated Pipe (SDR Series).
ASTM D2287
ASTM D2321
Standard Classification System and Basis for Specification for Non- rigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds.
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity- Flow Applications
ASTM D2464
Standard Specification for Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80.
2020
2017
2021
2016 (R 2022)
2020
2022
2015
2016
2018
2015 (E 2016)
2012 (R 2021)
2018
2021
2019
2014
2019
2020
2019
2020
2015
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 9 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2021
2017 (E 2020)
2017 (E 2018)
ASTM D2466
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40.
ASTM D2487
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D2488
Standard Practice for Description and Identification of Soils (Visual Manual Procedure)
ASTM D2564
Standard Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
2020
ASTM D2665
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
2020
ASTM D2855
Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
ASTM D2940/D2940M
Graded Aggregate Material for Base or Subbases for Highways or Airports
ASTM D2950/D2950M
Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
ASTM D3034
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D3035
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D3212
Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3262
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D36/D36M
Standard Test Method for Softening Point of Bitumen (Ring-and- Ball Apparatus)
ASTM D3689/D3689M
Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D3740
ASTM D3754
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D395
Test Method for Rubber Property – Compression Set
ASTM D3966/D3966M
Standard Test Methods for Deep Foundations under Lateral Load
ASTM D4060
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D412
Standard Test Methods for vulcanized rubber and thermos plastic elastomer- tension
ASTM D4253
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
2020
2020
2014
2016
2021
2021
2020
2014 (R 2020)
2022
2019
2019
2018
2022
2019
2016 (R 2021)
2016 (E 2019)
ASTM D4254
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
2016
ASTM D4318
Standard Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils
ASTM D4355/D4355M
Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus
ASTM D4380
Standard Test Method for Determining Density of Construction Slurries
ASTM D448
Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D4491/D4491M
Standard Test Method for Water Permeability of Geotextile by Permittivity
ASTM D4533/D4533M
Standard Test Method for Trapezoid Tearing Strength of Geotextiles ASTM D4548 Cohesive Soils
ASTM D4541
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4632/D4632M Rev A
Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
ASTM D4632/D4632M Rev A
Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
2017 (E 2018)
2021
2020
2012 (R 2022)
2022
2015
2022
2015
2015
ASTM D471
Test Method for Rubber Property – effect of liquids
2016 (R2021)
ASTM D4718/D4718M
Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D4751 Rev A
Standard Test Methods for Determining Apparent Opening Size of a Geotextile
2015
2021
ASTM D4791
Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
2019
ASTM D4833/D4833M
Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM D4945
Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
2007 (R 2020)
2017
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 10 of 54
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
ASTM D4972
Standard Test Method for pH of Soils
ASTM D4976 REV A
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4992
Evaluation of Rock to be Used for Erosion Control
ASTM D5/D5M
Standard Test Method for Penetration of Bituminous Materials
ASTM D5199
Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
ASTM D5268
Specification for Topsoil used of Landscaping purpose
ASTM D5312/5312M
Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
ASTM D5313
Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
ASTM D5361/D5361M
Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D5397
Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5519
Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D570
Standard Test Method for Water Absorption of Plastics
2019
8/1/2012 (R 2020)
2022
2020
2012 (R 2019)
2022
2021
2021
2016
2020
2015
2022
ASTM D573
Test Method for Rubber – deterioration in an air oven
2004 (R2019)
ASTM D5882
Standard Test Methods for Low Strain Impact Integrity Testing of Deep Foundations
ASTM D6032/D6032M
Standard Test method for Determining Rock Quality Designation (RQD) of Rock Core
2016
2017
ASTM D624
ASTM D6241
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
2000 (R 2020)
Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D638
Standard Test Method for Tensile Properties of Plastics
2022
2022
ASTM D6690
Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
2021
ASTM D6693/D6693M
Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6760
Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
ASTM D6913/D6913M
Standard Test Method for Particle-Size Analysis of Soils
ASTM D692/D692M
Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures
2020
2016
2017
2020
ASTM D6938
ASTM D698
Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
2017 (E 2021)
Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12400 ft-lbf/ft3 (600 kN-m/m3))
2012 (R2011)
ASTM D714
Standard Test Method for Evaluating Degree of Blistering of Paints
2002 (R2017)
ASTM D7234
Standard Test Method for pull-off strength of coating on concrete using portable pull-off adhesion tests
2021
ASTM D7383
Standard Test Method for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
ASTM D746
Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D75
Standard Practice for Sampling Aggregates
ASTM D75/75M
Standard Practice for Sampling Aggregates
2019
2020
2019
2019
ASTM D865
Test Method for Rubber – deterioration by heating in air
2011 (R2018)
ASTM D946/D946M
Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
ASTM D977
Standard Specification for Emulsified Asphalt
ASTM D994/D994M
Standard Test Method for Tensile Properties of Plastics Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
ASTM E154/E154M Rev A
Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
ASTM E376
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
2020
2020
2011 (R 2022)
2008 (R 2019)
2019
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 11 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2022
2004 (R 2018)
2011 (R 2019)
2020
ASTM E96/E96M
Standard Test Methods for Water Vapor Transmission of Materials
ASTM F1066
Standard Specifications for Vinyl Composition Floor Tile
ASTM F1136/F1136M
Standard Specification for Zinc/Aluminium Corrosion Protective Coatings for Fasteners
ASTM F1554
Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F1668
Standard Guide for Construction Procedures for Buried Plastic Pipe ASTM F2487 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
2016 (R 2022)
ASTM F1700
Standard Specifications for Solid Vinyl Floor Tile
ASTM F2329/F2329M
Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F3125/F3125M
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120ksi and 150ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
ASTM F3371
Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications
ASTM F436
Hardened Steel Washers
ASTM F436/F436M
Standard Specification for Hardened Steel Washers Inch and Metric Dimension
2020
2015
2022
2022
2019
2019
ASTM F441/F441M
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
2020
ASTM F477
Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
2014 (R 2021)
ASTM F606/F606M
Standard Test methods for Determining the mechanical properties of Externally and Internally Threaded fasteners, Washers, Direct Tension Indicators, and rivets
2021
ASTM F667/F667M
Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
ASTM F668
Standard Specification for Polyvinyl chloride (PVC) and Other Organic Polymer-Coated Steel Chain- Link Fence Fabric.
ASTM F894
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F959/F959M Rev A
Standard Specification for Compressible - Washer - Type Direct Tension Indicators for use with Structural Fasteners, Inch and Metric Series
AWS D1.1/D1.1M
Structural Welding - Steel
AWS QC1
Specification for AWS Certification of Welding Inspectors
AWWA C901
Standard for Polyethylene (PE) Pressure Pipe and Tubing, ¾ in. (19 mm) through 3 in. (76mm), for Water Service
2016 (R 2021)
2017
2019
2017
2020
2016
2020
BIS BS EN ISO 12944-8
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Development of specifications for new work and maintenance
2018
BS EN 12620
Aggregates for concrete
BS EN 1999-1-1
Design of aluminium structures - Part 1-1 : General structural rules
BS EN 1999-1-3
Design of aluminium structures - Part 1-3: Structures susceptible to fatigue
BS EN 1999-1-4
Design of aluminium structures - Part 1-4: Cold formed structural sheeting
2008
2007 + A2:2013
2007 + A1:2011
2007 + A1:2011
2016 (R 2021)
BSI BS 1377-1
BSI BS 1377-2
Methods of test for soils for civil engineering purposes - Part 1: General requirements and sample preparation
Methods of test for soils for civil engineering purposes Part 2: Classification tests and determination of geotechnical properties
2022
BSI BS 1377-3 + A1
Methods of test for soils for civil engineering purposes Part 3: Chemical and electro-chemical tests
BSI BS 1377-9
Methods of Test for Soils for Civil Engineering Purposes Part 9: In-Situ Tests
BSI BS 1427
Guide to on-site test methods for the analysis of waters
BSI BS 1707
Road surface dressing, bond coats, seals, preservatives and other sprays. Specification for the method of test for binder sprays for accuracy of spread of binder (spray bar bench test)
BSI BS 1722-10
Fences - Part 10 - Specification for Anti-Intruder Fences in Chain Link and Welded Mesh.
BSI BS 1881-122 + A1
Testing concrete Part 122: Method for determination of water absorption
BSI BS 1881-124 + A1
Testing Concrete - Part 124: Methods for analysis of hardened concrete
BSI BS 1881-204
Testing Concrete - Part 204: Recommendations on the Use of Electromagnetic Cover meters
BSI BS 1881-206
Testing Concrete - Part 206: Recommendations for Determination of Strain in Concrete
2018
2007
2009 (R 2013) (R 2018)
2018
2019
2011
2015
1988 (R 2014) (R 2020) 1986 (R 2014) (R 2020)
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 12 of 54
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS 1881-207
BSI BS 1881-208
Testing concrete — Part 207: Recommendations for the assessment of concrete strength by near-to- surface tests
Testing concrete — Part 208: Recommendations for the determination of the initial surface absorption of concrete
BSI BS 1881-209
Testing Concrete - Part 209: Recommendations for the Measurement of Dynamic Modulus of Elasticity
BSI BS 2571
Specification for general purpose flexible PVC compounds for moulding and extrusion
BSI BS 3083
Specification for hot-dip zinc coated and hot-dip Aluminium/Zinc Coated corrugated steel sheets for general purposes
BSI BS 3643-1
ISO metric screw threads Part 1: Principles and basic data
BSI BS 3643-2
ISO metric screw threads Part 2: Specification for selected limits of size
BSI BS 3900-0
Method of Test for Paints Index of Test Methods
BSI BS 3969 + A1
Recommendation for turf for general purposes
BSI BS 3998
Tree work - Recommendations
BSI BS 4102
Specification for Steel Wire for general Fencing purposes.
BSI BS 4190
ISO Metric Black Hexagon Bolts, Screws and Nuts – Specification
BSI BS 4428
Code of Practice for General Landscape
BSI BS 4449 + A3
Steel for the Reinforcement of Concrete. Weldable Reinforcing Steel, Bar, Coil and Decoiled Product.
BSI BS 4482
Steel wire for the reinforcement of concrete products. Specification
BSI BS 4483
Steel fabric for the reinforcement of concrete.
BSI BS 4592-0 + A1
Flooring, stair treads and handrails for industrial use - Part 0: Common design requirements and recommendations for installation
BSI BS 4592-1
Industrial type flooring and stair treads – Part 1: Metal open bar gratings – Specification
BSI BS 4592-5
BSI BS 476-20
BSI BS 476-21
Industrial type flooring and stair treads - Part 5: Solid plates in metal and glass reinforced plastics (GRP) - Specification
Fire Tests on Building Materials and Structures - Part 20: Method for Determination of the Fire Resistance of Elements of Construction (General Principles)
Fire Tests on Building Materials and Structures - Part 21: Methods for Determination of the Fire Resistance of Loadbearing Elements of Construction
BSI BS 4868
Specification for Profiled aluminium sheet for building
BSI BS 5154
Copper Alloy Globe, Globe Stop, Check & Gate Valves
BSI BS 5163-1
BSI BS 5163-2
Valves for waterworks purposes - Part 1: Predominantly key-operated cast iron gate valves - Code of practice
Valves for waterworks purposes - Part 2: Stem caps for use on isolating valves and associated water control apparatus - Specification’
BSI BS 5427 + A1
Code of practice for the use of profiled sheet for roof and wall cladding on buildings
BSI BS 5493
Code of practice for Protective Coating of Iron and Steel Structures against corrosion
1992 (R 2014) (R 2020) 1996 (R 2014) (R 2020) 1990 (R 2014) (R 2020) 1990 (R 1996) (R 2009) 1988 (R 2002) (R 2007)
2007
2007 (R 2012) (R 2017) 2010 (R 2015) (R 2020) 1998 (R 2005) (R 2011) 2010 (R 2015) (R 2020) 1998 (R 2005) (R 2011)
2014 (R 2020)
1989 (R 2001) (R 2011)
2005 (R 2014)
2005 (R 2012) (R 2017) 2005 (R 2012) (R 2017)
2006 (R 2017)
2006 (R 2011) (R 2016) 2006 (R 2011) (R 2016) 1987 (R 2012) (R 2020) 1987 (R 2016) (R 2021) 1972 (R 2007) (R 2012)
1991
2004 (R 2009) (R 2014) 2004 (R 2009) (R 2014)
2016
1977 (R 2015) (R 2020)
BSI BS 5911-1
BSI BS 5911-3
Concrete pipes and ancillary concrete products-Part 1: Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916)
2021
Concrete pipes and ancillary concrete products-Part 3: Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917)
2022
BSI BS 594987 + A1
Asphalt for Roads and other Paved Areas – Specification for Transport, Laying, Compaction and Type Testing Protocols
2015
BSI BS 6031
Code of practice for earthworks
BSI BS 7079
General Introduction to Standards for Preparation of Steel Substrates Before Application of Paints and Related Products.
BSI BS 7419
Specification for Holding down Bolts
BSI BS 7459-1
Rotating Sprinklers
BSI BS 7533-3 + A1
Pavements constructed with clay, natural stone or concrete pavers. Part 3: Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
BSI BS 7668
Weldable Structural Steels. Hot Finished Structural Hollow Sections in Weather Resistant Steels.
BSI BS 7962
Black materials for masking existing road markings
2009 (R 2014) (R 2020) 2008 (R 2013) (R 2018)
2012 (R 2017)
1995 (R 2003)
2005 (R 2014) (R 2020)
2016 (R 2021)
2000 (R 2007) (R 2012)
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 13 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS 8004 + A1
Code of practice for Foundations.
BSI BS 8006-1 + A1
Code of practice for strengthened/reinforced soils and other fills BS 8006-2
BSI BS 8008 + A1
Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes
BSI BS 8102
Code of practice for protection of below ground structures against water from the ground
BSI BS 812-111
Testing aggregates. Methods for determination of Ten per cent Fines Value (TFV)
BSI BS 812-121
Testing aggregates. Method for determination of soundness
BSI BS 812-123
Testing aggregates. Method for determinations of Alkali-Silica Reactivity. Concrete Prism Method
BSI BS 8443
Specification for establishing the suitability of special purpose concrete admixtures
BSI BS 8476
Code of Practice for the Safe Use of Concrete Pumps
BSI BS 8500-1 + A2
Concrete – Complementary British Standard to BS EN 206. Part 1:Method of specifying and guidance for the specifier
2015
2010 (R 2015) (R 2021) 1996 (R 2010) (R 2015)
2022
1990 (R 2000) (R 2014) 1989 (R 2000) (R 2011) 1999 (R 2006) (R 2011) 2006 (R 2011) (R 2016) 2007 (R 2012) (R 2017)
2015
BSI BS 8500-2 + A2
Concrete. Complementary British Standard to BS EN 206 Part-2: Specification for constituent materials and concrete
2015
BSI BS 8539 + A1
Code of practice for the selection & installation of post-installed anchors in concrete.
BSI BS 8666
Scheduling, Dimensioning, Bending and Cutting of Steel Reinforcement for Concrete.
BSI BS 9295
Guide to the structural design of buried pipes
BSI BS EN 10025-1
Hot rolled products of structural steels Part 1: General technical delivery conditions
BSI BS EN 10025-1
Hot rolled products of structural steels Part 1: General technical delivery conditions
BSI BS EN 10025-2
Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels
BSI BS EN 10025-2
Hot rolled products of structural steels Part 2: Technical delivery conditions for non-alloy structural steels
2012 (R 2020)
2020
2020
2004
2004
2019
2019
BSI BS EN 10025-3
Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
2019
BSI BS EN 10025-3
Hot rolled products of structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
2019
BSI BS EN 10025-4
Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
2019
BSI BS EN 10025-4
Hot rolled products of structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
2019
BSI BS EN 10025-5
Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
BSI BS EN 10025-5
Hot rolled products of structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
2019
2019
BSI BS EN 10025-6
Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
2019
BSI BS EN 10025-6
Hot rolled products of structural steels Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
2019
BSI BS EN 10029
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
BSI BS EN 10056-1
Structural steel equal and unequal leg angles - Part 1: Dimensions
BSI BS EN 10067
Hot rolled bulb flats – Dimensions and tolerances on shape dimensions and mass.
BSI BS EN 1008
Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
BSI BS EN 10080
Steel for the Reinforcement of Concrete
BSI BS EN 1011-1
Welding - Recommendations for welding of Metallic Materials General guidelines for Arc Welding
BSI BS EN 1011-2
Welding - Recommendations for Welding of Metallic Materials Arc Welding of Ferrite Steels
BSI BS EN 10204
Metallic products Types of inspection documents
BSI BS EN 10210-1
Hot finished structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions
2010
2017
1997 (R 2007)
2002 (R 2021)
2005
2009 (R 2020)
2001 (R 2018)
2004
2006
BSI BS EN 10210-1
Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Steels Part 1: Technical delivery condition
2006
BSI BS EN 10210-2
Hot finished steel structural hollow sections Part 2: Tolerances, dimensions and sectional properties
2019
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 14 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS EN 10210-2
Hot finished steel structural hollow sections Tolerances, dimensions and sectional properties
BSI BS EN 10216-1
Seamless steel tubes for pressure purposes — Technical delivery conditions, Part 1: Non-alloy steel tubes with specified room temperature properties
BSI BS EN 10219-1
Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery requirements
BSI BS EN 10219-2
Cold formed welded steel structural hollow sections Part 2: Tolerances, dimensions and sectional properties
BSI BS EN 10223-1
Steel Wire and Wire Products for Fences – Part 1: Zinc and Zinc Alloy Coated Steel Barbed Wire.
BSI BS EN 10223-6
Steel Wire and Wire Products for Fences – Part 6: Steel Wire Chain Link Fencing.
BSI BS EN 10225-1
Weldable structural steels for fixed offshore structures—Technical delivery (Parts 1 - 4)
BSI BS EN 10244-2
Steel Wire and Wire Products – Nonferrous Metallic Coatings on Steel Wire – Part 2 Zinc or Zinc Alloy Coatings.
BSI BS EN 10248
Hot Rolled Sheet piling of Non-Alloy Steels (Part 1 to 2)
BSI BS EN 10249
Cold Formed Sheet piling of Non-Alloy Steels (Part 1 to 2)
BSI BS EN 10255
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
BSI BS EN 10269
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BSI BS EN 10365
Hot rolled steel channels, I and H sections – Dimensions and masses
BSI BS EN 1062-3
BSI BS EN 1062-6
BSI BS EN 1074-1
BSI BS EN 1074-2
BSI BS EN 1090-2
BSI BS EN 1097-2
BSI BS EN 1097-3
BSI BS EN 1097-8
Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of liquid water permeability
Paints and varnishes. Coating materials and coating systems for exterior masonry and concrete. Determination of carbon dioxide permeability
Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
Valves for water supply Fitness for purpose requirements and appropriate verification tests Part 2: Isolating valves
Execution of steel structures and aluminium structures Part 2: Technical requirements for steel structures
Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation
Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids
Tests for mechanical and physical properties of aggregates Part 8: Determination of the polished stone value
2020
2019
2013
2006
2019
2012
2012
2019
2019
1996
1996
2004
2013 (R 2019)
2017
2008 (R 2018)
2002 (R 2018)
2000 (R 2021)
2000 (R 2021)
2018
2020
1998
BSI BS EN 12056-2
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation
BSI BS EN 12350
Testing Fresh Concrete (Part 1 to 12)
BSI BS EN 12350-1
Testing fresh concrete. Sampling and common apparatus
BSI BS EN 12350-2
Testing fresh concrete. Slump test
BSI BS EN 12350-7
Testing fresh concrete. Air content. Pressure methods
2000 (R 2021)
2019
2019
2019
2019
BSI BS EN 12390-1
Testing hardened concrete. Shape, dimensions and other requirements for test specimens and moulds
2021
BSI BS EN 12390-2
BSI BS EN 12390-3
Testing hardened concrete. Making and curing specimens for strength tests
Testing hardened concrete. Compressive strength of test specimens
BSI BS EN 12390-7
Testing hardened concrete. Density of hardened concrete
BSI BS EN 12390-8
BSI BS EN 124-1
BSI BS EN 124-2
Testing hardened concrete. Depth of penetration of water under pressure
Gully tops and manhole tops for vehicular and pedestrian areas Part 1: Definitions, classification, general principles of design, performance requirements and test methods
Gully tops and manhole tops for vehicular and pedestrian areas Part 2: Gully tops and manhole tops made of cast iron
2019
2019
2019
2019
2015 (R 2021)
2015 (R 2021)
BSI BS EN 12504-1
Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
2019
BSI BS EN 12666-1 + A1
Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system
BSI BS EN 12697-27
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 27: Sampling
BSI BS EN 12697-28
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 28: Preparation of Samples for Determining Binder Content, Water Content and Grading
2006
2017
2020
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 15 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS EN 12697-30
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 30: Specimen Preparation by Impact Compactor
BSI BS EN 12697-34
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 34: Marshall Test
BSI BS EN 12697-5
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 5: Determination of the Maximum Density
BSI BS EN 12697-6
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 6: Determination of Bulk Density of Bituminous Specimens
2019
2020
2019
2020
BSI BS EN 12697-7
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 7: Determination of the Bulk Density of Bituminous Specimens by Gamma Rays
2022
BSI BS EN 12697-8
Bituminous Mixtures – Test Methods for Hot Mix Asphalt – Part 8: Determination of Void Characteristics of Bituminous Specimen
2019
BSI BS EN 12699
Execution of Special Geotechnical work – Displacement Piles
BSI BS EN 12715
Execution of special geotechnical work. Grouting BS EN 12716
BSI BS EN 12794
Precast Concrete Products – Foundation Piles
BSI BS EN 12878
Pigments for the coloring of building materials based on cement and/or lime. Specifications and methods of test
BSI BS EN 12899-1
Fixed, vertical road traffic signs
BSI BS EN 1295-1
Structural Design of Buried Pipelines Under Various Conditions of Loading – General Requirements
BSI BS EN 13055
Lightweight aggregates
2015
2020
2005
2014
2008
2019
2016
BSI BS EN 13101
Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity
2002 (R 2008)
BSI BS EN 1338
Concrete Paving Blocks- Requirements and Test Methods
BSI BS EN 13381-8
Test methods for determining the contribution to the fire resistance of structural members Part 8: Applied reactive protection to steel members
BSI BS EN 1339
Concrete Paving Flags – Requirements and Test Methods
BSI BS EN 1340
Concrete Kerb Units – Requirements and Test Methods
2003
2013
2003
2003
BSI BS EN 13438
Paints and Varnishes – Powder Organic Coating for Galvanized or Sherardised steel Products for Construction Purposes.
2013 (R 2019)
BSI BS EN 13670
Execution of Concrete Structures
BSI BS EN 1367-2
Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
BSI BS EN 1367-4
Tests for thermal and weathering properties of aggregates. Determination of drying shrinkage
2010
2010 (R 2020)
2009 (R 2018)
BSI BS EN 1401-1
BSI BS EN 14015
Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
2019
Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
BSI BS EN 14199
Execution of Special Geotechnical Works - Micro piles
BSI BS EN 1436
Road marking materials – Road marking performance for road users and test methods
BSI BS EN 14396
Fixed ladders for manholes
BSI BS EN 14399 (Parts 1 - 6)
High-Strength Structural Bolting assemblies for preloading
BSI BS EN 1463-1
Road narking materials. Retroreflecting road studs. Initial performance requirements
2005
2015
2018
2004 (R 2008)
2015
2022
BSI BS EN 14654-1
Management and control of operational activities in drain and sewer systems outside buildings Part 1: Cleaning
2021
BSI BS EN 14679
Execution of special geotechnical works. Deep mixing
BSI BS EN 14731
Execution of special geotechnical works. Ground treatment by deep vibration
BSI BS EN 1504-9
A guide to the concrete repair
2005
2005 (R 2014)
2009 (R 2013)
BSI BS EN 15167-1
Ground granulated blast furnace slag for use in concrete, mortar and grout. Definitions, specifications and conformity criteria
2006
BSI BS EN 15167-2
Ground granulated blast furnace slag for use in concrete, mortar and grout. Conformity evaluation
BSI BS EN 15237
Execution of special geotechnical works. Vertical drainage BS EN ISO 9001
BSI BS EN 1536 + A1
Execution of Special Geotechnical Work – Bored Piles
2006 (R 2020)
2007 (R 2018)
2010
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 16 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS EN 1537
Execution of Special Geotechnical Work - Ground Anchors
2013
BSI BS EN 1542
Products and systems for the protection and repair of concrete structures. Test methods. Measurement of bond strength by pull- off
1999
BSI BS EN 1592
Aluminium and Aluminium Alloys – HF Seam Welded Tubes (Parts 1 - 4)
BSI BS EN 1610
Construction and Testing of Drains and Sewers
BSI BS EN 16228
Drilling and foundation equipment - Safety
1998
2015 (R 2021)
2014
BSI BS EN 16236
Assessment and verification of the constancy of performance (AVCP) of aggregates. Type testing and factory production control
2018
BSI BS EN 1744-1 + A1
Tests for chemical properties of aggregates. Chemical analysis
BSI BS EN 1790
Road marking materials – Preformed road markings
BSI BS EN 1871
Road marking materials – Physical properties
BSI BS EN 1916
Concrete pipes and fittings, unreinforced, steel fibre and reinforced
BSI BS EN 1917
Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
BSI BS EN 196-2
Method of Testing Cement - Chemical Analysis of Cement
BSI BS EN 197-1
Cement Composition, Specifications and Conformity Criteria for Common Cements
BSI BS EN 1991
Eurocode 1 - Actions on Structures general Action (Part 1 to 3)
BSI BS EN 1991-1-4 + A1
Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions
BSI BS EN 1992
Eurocode 2 - Design of Concrete Structures. (Part 1 to 3)
BSI BS EN 1992-1-1 + A1
Design of Concrete Structures
BSI BS EN 1992-3
Design of Concrete Structures. Liquid retaining and containing structures
BSI BS EN 1992-4
Eurocode 2 - Design of concrete structures Part 4: Design of fastenings for use in concrete
BSI BS EN 1993
Eurocode 3 - Design of Steel Structures (Part 1 to 6)
BSI BS EN 1993-1-1 + A1
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
2010
2013
2020
2002 (R 2011)
2002 (R 2011)
2013
2011
2006
2005
2005
2004
2006
2018
2005
2005
BSI BS EN 1993-1-10
Eurocode 3: Design of steel structures - Part 1-10: Material toughness and through-thickness properties
2005
BSI BS EN 1993-1-5 + A2
Eurocode 3 - Design of steel structures Part 1-5: Plated structural elements
BSI BS EN 1993-1-8
Eurocode 3: Design of steel structures - Part 1-8: Design of joints
CSA / Marine
BSI BS EN 1993-5
Eurocode 3 - Design of steel structures - Part 5: Piling
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS EN 1993-6
Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures
BSI BS EN 1994
Eurocode 4 - Design of Composite Steel and Concrete Structures (Part 1 to 2)
BSI BS EN 1997-1 + A1
Eurocode 7: Geotechnical design - Part 1: General rules
BSI BS EN 1997-2
Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing
BSI BS EN 1997-2
Eurocode 7. Geotechnical design. Ground investigation and testing
BSI BS EN 206 + A2
Concrete - Specification, Performance, Production and Conformity
BSI BS EN 480-4
Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete
BSI BS EN 681-1
BSI BS EN 681-2
BSI BS EN 682
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
BSI BS EN 752
Drain and Sewer Systems Outside Buildings
BSI BS EN 932-1
Tests for general properties of aggregates. Methods for sampling
2006
2005
2007
2007
2005
2005
2007
2007
2013
2005 (R 2021)
1996 (R 2013)
2000 (R 2014) (R 2020)
2002
2018
1997
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 17 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2022
2012 (R 2017)
2009
BSI BS EN 932-3
Tests for general properties of aggregates. Procedure and terminology for simplified petrographic description
BSI BS EN 933-3
Tests for geometrical properties of aggregates. Determination of particle shape. Flakiness index
BSI BS EN 934-2 + A1
Admixture for Concrete, Mortar and Grout Concrete Admixtures. Definitions, Requirements, Conformity, Marking and Levelling.
BSI BS EN 934-6
Admixtures for concrete, mortar and grout. Sampling, assessment and verification of the constancy of performance
2019
BSI BS EN ISO 11600 + A1
Building construction. Jointing products. Classification and requirements for sealants
2003 (R 2020)
BSI BS EN ISO 12944-1
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. General introduction
2018
BSI BS EN ISO 12944-2
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Classification of environments
2018
BSI BS EN ISO 12944-3
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Design considerations
BSI BS EN ISO 12944-4
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Types of surfaces and surface preparation
BSI BS EN ISO 12944-5
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Protective paint systems
2018
2018
2019
BSI BS EN ISO 12944-6
Paints and varnishes. Corrosion protection of steel structures by protective Paint systems. Laboratory performance test methods
2018
BSI BS EN ISO 12944-7
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Execution and supervision of paint work
2018
BSI BS EN ISO 1452-1 to 5
Plastics piping systems for water supply and for buried and above- ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U).
BSI BS EN ISO 1461
Hot-dip galvanized coatings on fabricated iron & steel articles. Specifications and test methods
BSI BS EN ISO 14692
Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping. Parts 1 to 4.
2010 (R 2014) (R 2019)
2022
2017
BSI BS EN ISO 14713-1
Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. General principles of design and corrosion resistance
2017
BSI BS EN ISO 148-1
Metallic materials - Charpy pendulum impact test Part 1: Test method
BSI BS EN ISO 17892
Geotechnical investigation and testing. Laboratory testing of soil Parts 1 - 12
2016
2014
BSI BS EN ISO 22476-1
Geotechnical investigation and testing - Field testing Part 1: Electrical cone and piezocone penetration test
2013
BSI BS EN ISO 22476-2 + A1
BSI BS EN ISO 22476-3 + A1
Geotechnical investigation and testing - Field testing - Part 2: Dynamic probing
Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test”
BSI BS EN ISO 23856
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass- reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
BSI BS EN ISO 3766
Construction drawings. Simplified representation of concrete reinforcement
BSI BS EN ISO 4032
Hexagon regular nuts (style 1) - Product grades A and B
BSI BS EN ISO 4034
Hexagon regular nuts (style 1) - Product grade C
BSI BS EN ISO 527-1
Plastics. Determination of tensile properties. General principles
BSI BS EN ISO 5470-1
Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Taber abrader
BSI BS EN ISO 7089
Plain washers. Normal series - Product grade A
BSI BS EN ISO 7091
Plain washers. Normal series - Product grade C
2006
2006
2021
2004 (R 2015) (R 2021)
2013 (R 2017)
2013 (R 2017)
2019
2016
2000 (R 2006) (R 2016)
2000 (R 2021)
BSI BS EN ISO 7783
Paints and varnishes. Determination of water-vapor transmission properties. Cup method
2018
BSI BS EN ISO 8501-1
Preparation of Steel Substrates before Application of Paints and Related Products; Visual Assessment of Surface Cleanliness, Rust Grades and Preparation Grades of uncoated Steel Substrates and of Steel Substrates after overall removal of previous coatings
BSI BS EN ISO 8501-3
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Preparation grades of welds, edges and other areas with surface imperfections
BSI BS EN ISO 898-1
Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
2007 (R 2017)
2006 (R 2014) (R 2020)
2013 (R 2018)
BSI BS EN ISO 898-2
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread
2022
BSI BS EN ISO 9001
Quality Management Systems – Requirements
BSI BS EN ISO 9004
Quality Management – Quality of an organization – Guidance to achieve sustained success
BSI BS EN ISO 9606
Qualification testing of welders — Fusion welding
2015 (R 2021)
2018
2017
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 18 of 54
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
BSI BS EN934-2 +A1
Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions, requirements, conformity, marking and labelling
2009
BSI BS ISO 3310-2
Test Sieves – Technical requirements and Testing. Test sieves of perforated plate
2013 (R 2019)
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
BSI BS ISO 4427
Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE)
CIRIA C 577
Guide to the Construction of Reinforced Cement Concrete in the Arabian Peninsula
CPMB100M-00
Concrete Plant Standards of the Concrete Plant Manufacturers Bureau
CRSI
Manual of Practice
CRSI PRB
Recommended Practice for Placing Reinforcing Bars
DIN 1025-1
FEMA-450
Hot rolled I-sections - Part 1: Narrow flange I-sections, I-series - Dimensions, masses, sectional properties
NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures
FHWA-NHI-05-039
Micropile Design and Construction
FHWA-NHI-10-016
Drilled Shafts : Construction Procedures and LRFD Design Methods
FHWA-RD-95-172
Load Transfer for Drilled Shafts in Intermediate Geomaterials
FHWA-RD-96-016
Drilled and Grouted Micropiles, Classification and type
FHWA-RD-96-017
Drilled and Grouted Micropiles, Design
FHWA-RD-96-018
Drilled and Grouted Micropiles, Construction,QA/QC,Testing
FHWA-RD-96-019
Drilled and Grouted Micropiles, Case Histories
FHWA-SA-97-070
Micropile Design and Construction
HB-17
IBC
Standard Specification of Highway Bridges
International Building Code
IBC 2006
International Building Code
ISO 10474
“Steel and Steel Products – Inspection Documents”
ISO 19901
ISO 19902
ISO 4633
ISO 7089
ISO 8686
ISO 898-1
ISO 898-2
ISO 9001
Petroleum and Natural Gas Industries – Specific Requirements for Offshore Structures
Petroleum and Natural Gas Industries – Fixed Steel Offshore Structures
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
Plain Washers - Normal Series - Product Grade A
Cranes – Design Principles for Loads and Load Combinations – Part 1: General
Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread
2013
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread
Quality Management Systems – Requirements
MSS SP-80
Bronze Gate, Globe, Angle and Check Valves
NRCA 3740
Waterproofing Manual
PI-201-77
Compacted Density
PIP ARC01015
Architectural and Building Utilities Design Criteria
PIP ARC01016
Building Data Sheet
PIP ARS08111
Standard Steel Doors and Frames Specification
PIP ARS08710
Door Hardware Specification
PIP ARS13120
Pre-Engineered Metal Buildings Specification
2019
2002
1996
2018
2019
2009
2003
2005
2010
2022
2017
2002
2021
2021
2013
2015
2020
2015
2000
2012
2022
2015
2019
2005
NA
2014
2014
2018
2018
2020
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 19 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
CSA
PIP CTCE-1000
External Coating System Selection Criteria - EDITORIAL REVISION
PIP CTEG-1000
Guidelines for Use of Coatings Practices
PIP CTSC-1000
Application of Coatings to Concrete
PIP CTSE-1000
Selection and Application of External Coatings
PIP CTSL-1000
Application of Internal Linings
PIP CTSU-1000
Application of Underground Coatings
PIP CVC01017
Plant Site Data Sheets
PIP PNE00003
Process Unit and Offsites Layout Guide
PIP STC01015
Structural Design Criteria
PIP STC01018
Blast Resistant Building Design Criteria
RCSC Committee
Specification for Structural Joints Using High-Strength Bolts
RCSC Committee
Specification for Structural Joints Using A325 or A490 Bolts
SDI
Roof Deck Design Manual
SMACNA 1819
Fire, Smoke and Radiation Damper Installation Guide for HVAC Systems
SMACNA 1966
HVAC Duct Construction Standards - Metal and Flexible (HVAC DUCT CONSTRUCTION STANDARDS METAL AND FLEXIBLE
SPERW
Specification of Piling and Embedded Retaining Wall
SSPC PA 1
Shop Field and Maintenance Painting of Steel
SSPC PAINT 27
Basic Zinc Chromate - Vinyl Butyral Washcoat
SSPC SP 1
Solvent Cleaning
SSPC SP 10
Near-White Blast Cleaning
SSPC SP 2
Hand Tool Cleaning
SSPC SP 3
Power Tool Cleaning
SSPC SP 5
White Metal Blast Cleaning
SSPC SP 6
Commercial Blast Cleaning
2018
2018
2019
2021
2017
2018
2019
2019
2017
2014
2020
2004
2000
2002
2005
2016
2016
1982 (E 2004)
2015 (E 2016)
2007
2018
2018
2007
2007
Standard Specifications
Standard Specifications , Load Tables, and Weight Tables for Steel Joists and Joist Girders
2015 & 2020
T 180
Moisture-Density Relations of Soils Using a 10-lb Rammer and an 18-in. Drop
TMS 402/ 602-16
Building Code Requirements and Specification for Masonry Structures
UL 1709
Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel
Electrical
API STD 614
Lubrication, Shaft-sealing, and Oil-control Systems and Auxiliaries
Electrical
API Standard 617
Axial and Centrifugal Compressors and Expander-compressors
Electrical
API Standard 670
Machinery Protection Systems
Electrical
API Standard 671
Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services
Electrical
ASTM-A345
Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications
Electrical
BSI BS 5467
Electric cables – Thermosetting insulated, armoured cables of rated voltages of 600/1000 V and 1900/3300 V for fixed installations
Electrical
BSI BS 6004 + A1
Electric cables - PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting - AMD
Electrical
BS 6121-1
Mechanical cable glands- Part 1: Armour glands - Requirements and test methods.
Electrical
BSI BS 6231
Electrical cables - Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
2006
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 20 of 54
2021
2016
2022
1905
2022
2014
2020
2019
2016
2012
2005 (R 2016)
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
Electrical
BSI BS 6622
Electrical
BSI BS 6724
Electrical
BSI BS 7655-2.6
Electric cables - Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV - Requirements and test methods
Electric cables – Thermosetting insulated, armoured cables of rated voltages of 600/1000 V and 1900/3300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire
Specification for Insulating and sheathing materials for cables - Part 2: Cross-linked elastomeric sheathing compounds - Section 2.6 Sheathing compounds for ships’ wiring and offshore applications
Electrical
BS 7671 +A2
Requirements for Electrical Installations IET wiring regulations.
Electrical
BS EN 10204
Metallic products - Types of inspection documents
Electrical
BS EN 10257
Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables
Electrical
BS EN 12464-1
Light and lighting — Lighting of workplaces Part 1: Indoor workplaces.
Electrical
BS EN 12464-2
Light and lighting — Lighting of workplaces Part 2: Outdoor workplaces.
Electrical
BS EN 12548
Lead and Lead Alloys - Lead Alloy Ingots for Electric Cable Sheathing and for Sleeves
Electrical
BS EN 1838
Lighting applications — Emergency lighting.
Electrical
BS EN 50522
Earthing of power installations exceeding 1 kV a.c.
Electrical
BS EN 50307
Lead and lead alloys - Lead and lead alloy sheaths and sleeves of electric cables
Electrical
BSI BS EN 60228
Conductors of insulated cables
Electrical
CEI EN 50598-3
Ecodesign for power drive systems, motor starters, power electronics and their driven applications Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
Electrical
EI15
Part 15: Area Classification for installations handling flammable fluids.
Electrical
EN 50182
Conductors for overhead lines. Round wire concentric lay stranded conductors.
Electrical
EN 62444
Cable glands for electrical installations.
Electrical
EU Directive 2013/35/EU
DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the minimum health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields)
Electrical
IEC 60028
International standard of resistance for copper
2007
2016
2000
2018
2004
2011
2021
2014 (R 2019)
1999
2013
2023
2003
2005
2015
2014
2013
2013
1925
Electrical
IEC 60034
Rotating electrical machines - All parts.
Electrical
IEC 60038
IEC standard voltages.
1991 to 2022
2021
Electrical
IEC 60051
Direct acting indicating analogue electrical measuring instruments and their accessories
2016 to 2019
Electrical
IEC 60059
IEC standard current ratings
Electrical
IEC 60060
High-voltage test techniques - All parts
Electrical
IEC 60071
Insulation coordination.
Electrical
IEC 60072-1
Rotating electrical machines – Dimensions and output series – Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
Electrical
IEC 60072-2
Dimensions and Output Series for Rotating Electrical Machines Part 2: Frame Numbers 355 to 1 000 and Flange Numbers 1180 to 2360
Electrical
IEC 60073
Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Coding Principles for Indicators and Actuators
Electrical
IEC 60076
Power transformers - All parts.
Electrical
IEC 60076-12
Loading guide for dry type power transformers.
Electrical
IEC 60079
Explosive atmospheres - All parts.
2009
2006 to 2010
2019 to 2023
2022
1990
2002
1997 to 2023
2008
2009 to 2023
Electrical
IEC 60085
Electrical insulation – Thermal Evaluation and Classification of Electrical Insulation
2007
Electrical
IEC 60099
Surge arresters - All parts).
Electrical
IEC 60112
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
Electrical
IEC 60137
Insulated bushings for alternating voltages above 1000V
Electrical
IEC 60146
Semiconductor converters - All parts
Electrical
IEC 60183
Guidance for the selection of high-voltage A.C. cable systems
2014 to 2018
2020
2017
1999 to 2024
2015
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 21 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
Electrical
IEC 60204
Safety of Machinery. Electrical Equipment of Machines - All parts
2009 to 2023
Electrical
IEC 60214-1
Tap-changers – Part 1: Performance requirements and test methods
Electrical
IEC IEC/IEEE 60214-2
TAP-changers – Part 2: Application guidelines
2014
2019
Electrical
IEC 60227
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - All parts
2001 to 2024
Electrical
IEC 60228
Conductors of Insulated Cables
Electrical
IEC 60230
Impulse tests on cables and their accessories
Electrical
IEC 60255
Measuring relays and protection equipment – All parts
Electrical
IEC 60269
Low-voltage fuses
Electrical
IEC 60270
High-Voltage test techniques - Partial discharge measurements
Electrical
IEC 60282-1
High-voltage fuses – Part 1: Current-limiting fuses
2023
2021
1980 to 2023
2014 to 2024
2015
2020
Electrical
IEC 60287
Electric cables – Calculation of the current rating
1995 to 2024
Electrical
IEC 60296
Fluids for electrotechnical applications – Mineral insulating oils for electrical equipment
2020
Electrical
IEC 60309
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes
2017 to 2021
Electrical
IEC 60331-1
Tests for electric cables under fire conditions – Circuit integrity – Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
Electrical
IEC 60331-21
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 21: Procedures and Requirements - Cables of Rated Voltage up to and Including 0,6/1,0 kV
Electrical
IEC 60332
Tests on electric and optical fibre cables under fire conditions - All parts.
Electrical
IEC 60364
Low-voltage electrical installations - All parts.
Electrical
IEC 60417-DB
Graphical symbols for use on equipment - Includes access to ISO 7000 Database
Electrical
IEC 60445
Electrical
IEC 60502-1
Electrical
IEC 60502-2
Electrical
IEC 60502-4
Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals, conductor terminations and conductors
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
Electrical
IEC 60529
Degrees of protection provided by enclosures (IP Code).
Electrical
IEC 60617
Graphical symbols for diagrams
2018
1999
2004 to 2018
2005 to 2023
2019
2021
2021
2024
2023
2019
2020
Electrical
IEC 60622
Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-cadmium prismatic rechargeable single cells
2002
Electrical
IEC 60623
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Vented nickel- cadmium prismatic rechargeable single cells
Electrical
IEC 60684-3-283
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 283: Heat- shrinkable, polyolefin sleeving for bus-bar insulation
Electrical
IEC 60688
Electrical measuring transducers for converting AC and DC electrical quantities to analogue or digital signals
Electrical
IEC 60721-3-3
Classification of environmental conditions – Part 3-3: Classification of groups of environmental parameters and their severities – Stationary use at weatherprotected locations
Electrical
IEC 60724
Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
Electrical
IEC 60751
Industrial platinum resistance thermometers and platinum temperature sensors
Electrical
IEC 60754-1
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content.
2017
2019
2021
2019
2008
2022
2019
Electrical
IEC 60754-2
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity.
2019
Electrical
IEC 60794-4-20
Optical fibre cables - Part 4-20: Family specification - Optical ground wires (OPGW) along electrical power lines.
2014
Electrical
IEC 60811
Electric and optical fibre cables – Test methods for non-metallic materials
2012 to 2023
Electrical
IEC 60831
Shunt power capacitors of the self-healing type for A.C. systems having a rated voltage up to and including 660 V.
Electrical
IEC 60865
Short-circuit currents – Calculation of effects
2014
2011
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 22 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
Electrical
IEC 60870
Telecontrol equipment and systems - All parts
1989 to 2016
Electrical
IEC 60871
Shunt capacitors for a.c. power systems having a rated voltage above 1000 V (All Parts)
2014
Electrical
IEC 60885
Electrical Test Methods for Electrical Cables
Electrical
IEC 60909
Short circuit current calculation in three phase A.C. systems.
Electrical
IEC 60947
Low voltage switchgear and control gear - All parts.
1987 to 2015
2009 to 2016
2009 to 2024
Electrical
IEC 60949
Calculation of Thermally Permissible Short-Circuit Currents, Taking into Account Non-Adiabatic Heating Effects
1988
Electrical
IEC 60986
Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
2008
Electrical
IEC 61000
Electromagnetic Compatibility (EMC) - All parts.
1996 - 2024
Electrical
IEC 61034-1
Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus - Edition 3.2 Consolidated Reprint
Electrical
IEC 61034-2
Measurement of smoke density of cables burning under defined conditions.
Electrical
IEC 61039
Classification of insulating liquids.
Electrical
IEC 61089
Round wire concentric lay overhead electrical stranded conductors.
Electrical
IEC 61099
Insulating liquids – Specifications for unused synthetic organic esters for electrical purposes
Electrical
IEC 61109
Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V - Definitions, test methods and acceptance criteria.
Electrical
IEC 61131-2
Industrial-process measurement and control – Programmable controllers – Part 2: Equipment requirements and tests
Electrical
IEC 61204
Low-Voltage Power Supply Devices, D.C. Output
2019
2019
2008
1997
2010
2008
2017
2001
Electrical
IEC 61363
Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
1998
Electrical
IEC 61378-1
Converter transformers – Part 1: Transformers for industrial applications
2011
Electrical
IEC 61434
Secondary cells and batteries containing alkaline or other non-acid electrolytes Guide to the designation of current in alkaline secondary cell and battery standards
1996
Electrical
IEC 61439
Low voltage switchgear and control gear assemblies - All parts.
2012 to 2024
Electrical
IEC 61466-1
Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 1: Standard strength and end fittings.
2016
Electrical
IEC 61466-2
Composite string insulator units for overhead lines with a nominal voltage greater than 1000 V - Part 2: Dimensional and electrical characteristics.
2018
Electrical
IEC 61620
Insulating Liquids - Determination of the Dielectric Dissipation Factor by Measurement of the Conductance and Capacitance
1998
Electrical
IEC 61800
Adjustable Speed Electrical Power Drive Systems - All Parts
2015 to 2023
Electrical
IEC 61850
Communication networks and systems for power utility automation - All parts
2012 to 2022
Electrical
IEC 61869
Instrument Transformers - All parts.
Electrical
IEC 61936
Power installations exceeding 1 kV a.c. and 1,5 kV DC - All parts.
Electrical
IEC 62052-21
Electricity metering equipment - General requirements, tests and test conditions - Part 21: Metering equipment.
Electrical
IEC 62053-21
Electricity metering equipment - Particular requirements - Part 21: Static meters for AC active energy (classes 0,5, 1 and 2).
Electrical
IEC 62040
Uninterruptible power systems (UPS)
I&C / Electrical
IEC 62061
Safety of machinery – Functional safety of safety-related control systems
2011 to 2023
2021 to 2023
2020
2020
2022
2024
Electrical
IEC 62067
Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements
2022
Electrical
IEC 62155
Hollow pressurised and unpressurised ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000V
2003
Electrical
IEC 62259
Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single cells with partial gas recombination
Electrical
IEC 62262
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
2003
2021
Electrical
IEC 62271
High Voltage Switchgear and Control gear- All parts.
2008 to 2024
Electrical
IEC 62271-200
AC metal-enclosed switchgear and control gear for rated voltages above 1 kV and up to including 52 kV
2021
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 23 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
Electrical
IEC 62271-203
AC gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
2022
Electrical
IEC 62271-4
High voltage switchgear and control gear. Handling procedures for gases for insulation and/or switching
2022
Electrical
IEC 62305
Protection against lightning - All parts.
Electrical
IEC 62310
Static transfer systems (STS)
Electrical
IEC 62351
Power systems management and associated information exchange – Data and communications security - All parts.
Electrical
IEC 62402
Obsolescence Management.
2010
2005 to 2008
2016 to 2023
2019
Electrical
IEC 62439
Industrial communication networks - High availability automation networks - All parts
2010 to 2021
Electrical
IEC 62443
Industrial communication networks – Network and system security - All parts.
2010 to 2023
Electrical
IEC 62444
Cable glands for electrical installations
2010
Electrical
IEC 62477-2
Safety requirements for power electronic converter systems and equipment – Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC
2018
Electrical
IEC 62485-1
Safety requirements for secondary batteries and battery installations - Part 1: General Safety Information
Electrical
IEC 62485-2
Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries.
Electrical
IEC 62535
Insulating liquids – Test method for detection of potentially corrosive sulphur in used and unused insulating oil
2015
2010
2008
Electrical
IEC 62631
Dielectric and resistive properties of solid insulating materials - All parts
2011 to 2024
Electrical
IEC TR 60083
Plugs and socket outlets for domestic and similar general use standardized in member countries of IEC.
Electrical
IEC TR 60616
Terminal and Tapping Markings for Power Transformers
Electrical
IEC TR 61000-3-6
Electromagnetic compatibility (EMC) – Part 3-6: Limits – Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
2015
1978
2008
Electrical
IEC TR 61641
Enclosed LV Switchgear and Control gear – Guide for testing under conditions of arcing due to internal fault.
2014
Electrical
IEC TR 61912-1
Low-voltage switchgear and controlgear – Overcurrent protective devices – Part 1: Application of short- circuit ratings
2007
Electrical
IEC TS 62271-304
Electrical
IECEx 02
High-voltage switchgear and controlgear – Part 304: Classification of indoor enclosed switchgear and controlgear for rated voltages above 1 kV up to and including 52 kV related to the use in special service conditions with respect to condensation and pollution IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) IECEx Certified Equipment Scheme covering equipment for use in explosive atmospheres – Rules of Procedure.
Electrical
IEEE 1584
IEEE Guide for Performing Arc-Flash Hazard Calculations.
Electrical
IEEE 519
IEEE Standard for Harmonic Control in Electric Power Systems
Electrical
IEEE 80
IEEE Guide for Safety in AC Substation Grounding.
Electrical
IEEE C37.101
IEEE Guide for Generator Ground Protection.
Electrical
IEEE C37.102
IEEE Guide for AC Generator Protection.
Electrical
IEEE C-37.2
Electrical Power System Device Function Numbers, Acronyms, and Contact Designations.
Electrical
IEEE C37.99
IEEE Guide for Protection of Shunt Capacitor Banks.
Electrical
IEEE 399
IEEE Recommended Practice for Industrial and Commercial Power Systems Analysis (Brown Book)
Electrical
IEEE 242
IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (Buff Book)
Electrical
IEEE 142
IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems (Green Book)
Electrical
IEEE 1584
IEEE Guide for Performing Arc-Flash Hazard Calculations.
Electrical
IEEE 421.2
Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems
2019
2022
2018
2022
2013
2006
2023
2022
2012
1997
2001
2007
2018
2014
Electrical
IEEE 115
Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
2019
Electrical
IEEE 519
Harmonic Control in Electric Power Systems
2022
Electrical
IEEE 522
Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines
2023
Electrical
IEEE 575
Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV
2014
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 24 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
Electrical
IEEE 1115
Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications
Electrical
IEEE 1184
Guide for Batteries for Uninterruptible Power Supply Systems
Electrical
ISGOTT
International Safety Guide for Oil Tankers and Terminals.
Electrical
ISO 1132-1
Rolling Bearings – Tolerances – Part 1: Terms and Definitions
Electrical
ISO 1132-2
Rolling Bearings - Tolerances Part 2: Measuring and Gauging Principles and Methods
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2014
2022
2020
2000
2001
Electrical
ISO 12944
Paints and varnishes - Corrosion protection of steel structures by protective paint systems. - All parts
2017 to 2018
Electrical
ISO 1461
Hot dip galvanised coatings on fabricated iron and steel articles - Specifications and test methods.
Electrical
ISO 15
Rolling Bearings – Radial Bearings – Boundary Dimensions, General Plan
2022
2017
Electrical
ISO 1680
Acoustics - Test Code for the Measurement of Airborne Noise Emitted by Rotating Electrical Machines
2013
Electrical
ISO 19011
Guidelines for auditing management systems
Electrical
ISO 21940-11
Mechanical vibration - Rotor balancing - Part 11: Procedures and tolerances for rotors with rigid behaviour
Electrical
ISO 21940-12
Mechanical vibration - Rotor balancing - Part 12: Procedures and tolerances for rotors with flexible behaviour
Electrical
ISO 281
Rolling bearings - Dynamic load ratings and rating life
Electrical
ISO 3744
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
2018
2016
2016
2007
2010
Electrical
ISO 3746
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
2010
Electrical
ISO 3864-1
Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings
2011
Electrical
ISO 8503-2
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates
2012
Electrical
ISO 8528
Reciprocating internal combustion engine driven alternating current generating sets.
2005 to 2023
Electrical
ISO 9001
Quality management systems — Requirements
Electrical
ISO 9004
Quality management - Quality of an organization - Guidance to achieve sustained success
Electrical
NEMA MG-1
Motors and Generators.
Electrical
NFPA 101
Life Safety Code
Electrical
NFPA 20
Standard for the Installation of Stationary Pumps for Fire Protection
Electrical
NFPA 70
National Electrical Code.
Electrical
NFPA 780
Standard for the Installation of Lightning Protection.
Electrical
Z0-TS-E-04010
Navigational Aid Systems for Offshore Facility.
Electrical
UAE Electricity wiring regulations.
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
62.1-2016
ANSI/ASHRAE Ventilation for Acceptable Indoor Air Quality Standard
ANSI Z 358.1
Emergency Eyewash and Shower Equipment
ANSI/ASA S3.41
Audible Emergency Evacuation Signal
API RP 2001
Fire Protection in Refineries
API RP 2003
API RP 2030
Recommended Practice for Protection Against Ignitions Arising Out of Static Lightning and Stray Currents Recommended Practice
Application of Fixed Water Spray Systems for Fire Protection in the Petroleum and Petrochemical Industries
API RP 2218
Fireproofing Practices in Petroleum and Petrochemical Processing Plants
ASME A17.1
Standard Safety Code for Elevators and Escalators
ASTM D4541
Standard Test method for Pull-off Strength of Coatings Using Portable Adhesion Testers
ASTM D6386
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
2015
2018
2021
2023
2021
2022
2022
2014
2016
2014
2015
2019
2015 (R 2020)
2014 (R 2022)
2020
2022
2022
2022
Not Applicable / PIANC Refers
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 25 of 54
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
ASTM D695
Standard Test Method for Compressive Properties of Rigid Plastics
ASTM D790
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM E119
Standard Test Methods for Fire Tests of Building Construction and Materials
ASTM E1264
Standard Classification for Acoustical Ceiling Products
2023
2017
2020
2022
ASTM E605
Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
2019
ASTM E84
Standard Test method for Surface Burning Characteristics of Building Materials
2022
BS 1635
BS 7121
Codes of Practise for Safe Use of Cranes
Recommendations for Graphical Symbols and abbreviations for Fire Protection Drawings
1990 (R2020)
BS EN IEC 60079-10
Explosive atmospheres Classification of areas. Explosive gas atmospheres
2016
2021
BS EN3
Fire Extinguisher Color Code
1996
Withdrawn
EEMUA No.160
Safety Related Instrument Systems for Process Industries (including PES)
EI 15
Model code of safe practice Part 15: Area classification for installations handling flammable fluids
EN 13001
Part 1 General Principles and Requirements, Part 2 Load Effects
EN 13077-2
EN 13135
EN 13557
EN 982
EN 983
Specification for Cranes safety – requirements for health and safety – Part 2: Limiting and indicating devices
Cranes – Safety Design – Requirements for Equipment, General Design
Cranes – Controls and Control Stations
Safety requirements for fluid power systems and components - hydraulics
Safety requirements for fluid power systems and components - pneumatics
EN/IEC 62305
Lightning Protection Standard, 2010
IEC 331
Components for low-voltage surge protection
ISA TR84.00.07
Guidance on the Evaluation of Fire, Combustible Gas and Toxic Gas System Effectiveness
ISO 13703
ISO 17776: 2016
Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations
Petroleum and Natural Gas Industries – Offshore Production Installations Major Accident Hazard management during the design of new installations, 2016
ISO 20088-3
Determination of the resistance to cryogenic spillage of insulation materials — Part 3: Jet release
ISO 22899-1
Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements
NFPA 10
Standard for Portable Fire Extinguishers
NFPA 101
Life Safety Code Public Information - effective date 8/31/2011
NFPA 11
NFPA 12
Standard for Low-Medium- and High-Expansion Foam
Standards for Carbon Dioxide Extinguishing System
NFPA 1221
Standard for the Installation Maintenance and Use of Emergency Services Communications Systems
NFPA 13
NFPA 14
NFPA 15
NFPA 17
Standard for Installation of Sprinkler Systems
Standard for the Installation of Standpipe Private Hydrant and Hose Systems
Water Spray Fixed Systems
Standard for Dry Chemical Extinguishing Systems
NFPA 1901
Standard for Automotive Fire Apparatus
NFPA 1961
Standard on Fire Hose
NFPA 20
Standard for the Installation of Stationary Pumps for Fire Protection
1989
2015
2015
2022
2018
2024
2021
2021
2010
2018
2018
2023
2016
2018
2021
2022
2024
2024
2022
2019
2022
2024
2022
2024
2016
2020
2022
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 26 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
NFPA 2001
Standard on clean Agent Fire Extinguishing Systems
NFPA 22
Standard for Water Tanks for Private Fire Protection
NFPA 220
Standard on Types of Building Construction
NFPA 232
Standard for the Protection of Records
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2022
2023
2024
2022
2022
2023
NFPA 24
NFPA 25
NFPA 251
NFPA 252
NFPA 255
NFPA 45
NFPA 496
NFPA 497
Standard for the Installation of Private Fire Service Mains and Their Appurtenances
Standard for the Inspection Testing and Maintenance of Water-Based Fire Protection Systems
Fire Tests of Building Construction and Materials
2006
Withdrawn
Standard Methods of Fire Tests of Door Assemblies
2022
Standard Method of Test of Surface Burning Characteristics of Building Materials
2006
Withdrawn
NFPA 30
Flammable and Combustible Liquids Code
NFPA 307
NFPA 37
Standard for Construction and Fire Protection of Marine Terminals Piers and Wharves
Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines
NFPA 400
Hazardous Materials Code
Standard on Fire Protection for Laboratories Using Chemicals
Standard For Purged and Pressurized Enclosures For Electrical Equipment in Hazardous Areas
Recommended Practice for the Classification of Flammable Liquids Gases or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas
2024
2024
2021
2024
2021
2024
2024
NFPA 51B
Fire Prevention in Use of Cutting and Welding Processes
NFPA 54
NFPA 58
NFPA 59
National Fuel Gas Code
Liquefied Petroleum Gas Code
Utility LP-Gas Plant Code
NFPA 59A
Standard for the Production Storage and Handling of Liquefied Natural Gas (LNG)
NFPA 600
Standard for Industrial Fire Brigades
NFPA 70
National Electrical Code
NFPA 70E
Electrical Safety in Work Place
NFPA 72
NFPA 75
NFPA 750
NFPA 780
National Alarm Code
Standard for the Protection of Electronic Computer Data
Standard on Water Mist Fire Protection Systems
Standard for the Installation of Lightning Protection Systems
NFPA 80
Standard for Fire Doors and Fire Windows
NFPA 850
NFPA 90A
NFPA 91
NFPA 96
Recommended Practice for Fire Protection for Electric Generating Plants & HVDC Converter Stations
Standard for the Installation of Air-conditioning and Ventilating Systems
Standard for Exhaust Systems for Air Conveying, of Vapors, Gases, Mists, and Non-combustible Particulate Solids
Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations
NFPA17A
Standard for Wet Chemical Extinguishing Systems
OCIMF
Oil Companies International Marine Forum (OCIMF)-Guide on Marine Terminal Fire Protection and Emergency Evacuation – 1987
SIGTTO-LNG
SIGTTO-LNG Operations in Port Areas – Essential best practices for the industry
Soil Contamination User Guide
Soil Contamination User Guide, Environment Agency-Abu Dhabi, 2016.
2024
2024
2024
2024
2023
2020
2023
2024
2022
2024
2023
2023
2022
2020
2024
2020
2024
2024
1987
2016
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 27 of 54
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
HSE
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
HSE
HSE
HSE
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
UAE Fire and Life Safety
UAE Fire and Life Safety Code of Practice 2018
UL 1709
UL 2431
UL Standard for Safety Rapid Rise Fire Tests of Protection Materials for Structural Steel- 5th Edition
UL Standard for Safety - Durability of Fire Resistive Coatings and Materials, 2nd Edition
AGA Report 7
Measurement of Gas by Turbine Meters
AGA Report 8
Compressibility Factors of Natural Gas and other related Hydrocarbon Gases
AGA Report No. 11
Measurement of Natural Gas by Coriolis Meters
AGA Report No. 3
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids
AGA Report No. 9
Measurement of Gas by Multipath Ultrasonic Meters
ANSI/FCI 70.2
Control Valve Seat Leakage
ANSI/FCI 70.3
Regulator Seat Leakage
ANSI/FM3260
Radiant Energy-Sensing Fire Detectors for Automatic Fire Alarm Signalling
ANSI/ISA 101.01
Human Machine Interfaces for Process Automation Systems
ANSI/ISA 75.01.01
Industrial-Process Control Valves – Part 2-1: Flow Capacity – Sizing Equations for Fluid Flow under Installed Conditions
ANSI/ISA 75.02.01
Control Valve Capacity Test Procedure
ANSI/ISA 75.05.01
Control Valves Terminology
ANSI/ISA 75.08.01
ANSI/ISA 75.08.02
Face-to-Face Dimensions for Integral Flanged Globe Style Control Valves Bodies (Classes 125, 150, 250, 300 and 600)
Face-to-Face Dimensions for Flanged and Flangeless Rotary Control Valves (Classes 150, 300 and 600 and PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100)
2018
2022
2019
2006
2017
2013
2016
2022
2021
2021
2021
2015
2012
2008
2019
2016
2003
ANSI/ISA 75.08.06
Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500 and 2500)
2002
ANSI/ISA 75.08.08
Face-to-Centerline Dimensions for Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300 and 600)
2015
ANSI/ISA 75.11.01
Inherent Flow Characteristics and Rangeability of Control Valves
ANSI/ISA 75.17
Control Valve Aerodynamic Noise Prediction
ANSI/ISA 75.19.01
Hydrostatic Testing of Control Valves
ANSI/ISA-TR99.00.01
Security Technologies for Industrial Automation and Control Systems
API 2350
API 527
API 670
Overfill Prevention for Storage Tanks in Petroleum Facilities
Seat Tightness of Pressure Relief Valves
Machinery Protection Systems
API MPMS 13.3
Measurement Uncertainty
API MPMS 14.10
Measurement of Flow to Flares
API MPMS 14.12
Measurement of Gas by Vortex Meter
API MPMS 14.3 All parts
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids
API MPMS 14.3.1
API MPMS 14.3.2
API MPMS 14.3.3
API MPMS 14.3.4
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric, Square-edged Orifice Meters Part 1: General Equations and Uncertainty Guidelines
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids - Concentric, Square-edged Orifice Meters
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids— Concentric, Square-edged Orifice Meters Part 3: Natural Gas Applications
Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids— Concentric, Square-edged Orifice Meters Part 4—Background, Development, Implementation Procedure, and Example Calculations
API MPMS 14.9
Measurement of Natural Gas by Coriolis Meter
API MPMS 20.1
Allocation Measurement
API MPMS 20.2
Production Allocation Measurement Using Single-phase Device
2013
1989
2013
2007
2020
2020
2014
2017
2021
2017
2019
2012
2016
2013
2019
2013
2013
2016
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 28 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
API MPMS 20.5
Recommended Practice for Application of Production Well Testing in Measurement and Allocation
API MPMS 22.3
Testing Protocol for Flare Gas Metering
API MPMS 3.1B
Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging
API MPMS 5.1
General Considerations for Measurement by Meters
API MPMS 5.2
Measurement of Liquid Hydrocarbons by Displacement Meters
API MPMS 5.3
Measurement of Liquid Hydrocarbons by Turbine Flow Meters
API MPMS 5.4
Accessory Equipment for Liquid Meters
API MPMS 5.5
Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems
API MPMS 5.6
Measurement of Liquid Hydrocarbons by Coriolis Meters
API MPMS 5.8
Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters API RP 551
API RP 551
Process Measurement Instrumentation
API RP 552
Transmission Systems
API RP 553
Refinery Valves and Accessories for Control and Safety Instrumented Systems
API RP 554
Process Control Systems
API RP 555
Process Analyzers
API STD 598
Valve Inspection and Testing
API STD 600
Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets
API STD 607
Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats
API STD 608
Metal Ball Valves - Flanged, Threaded, and Butt-Welding Ends
API STD 609
Butterfly Valves: Double Flanged, Lug- and Wafer-Type
API STD 6FA
Specification for Fire Test for Valves
ASME B1.20.1
Pipe Threads, General Purpose (Inch)
ASME B16.10
Face to Face and End to End Dimensions of Valves
ASME B16.36
Orifice Flanges
I&C / Piping
ASME B16.47
Large Diameter Steel Flanges NPS 26 through NPS 60 Metric/Inch Standard
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
ASME B16.5
Pipe Flanges and Flanged Fittings
ASME B31.3
Process Piping
ASME B40.100
Pressure Gauges and Gauge Attachments
ASME B46.1
Surface Texture (Surface Roughness, Waviness and Lay)
ASME MFC-11
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
ASME MFC-21.2
Measurement of Fluid Flow by Means of Thermal Dispersion Mass Flowmeters
ASME MFC-3M
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
ASME PTC 19.3 TW - 2016
Thermowells Performance Test Codes
ASME-MFC-1
Glossary of Terms used in the Measurement of Fluid Flow in Pipes
ASME-MFC-10M
Method for Establishing Installation Effects on Flowmeters
ASME-MFC-11
Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters
ASME-MFC-12M
Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements
2017
2015
2021
2005
2005
2005
2005
2005
2021
2011
2016
1994
2012
2021
2013
2016
2021
2016
2020
2021
2020
2013
2022
2020
2020
2020
2020
2013
2019
2006
2010
2004
2016
2014
2000
2006
2006
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 29 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Item
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
ASME-MFC-13M
Measurement of Fluid Flow in Closed Conduits: Tracer Methods
ASME-MFC-14M
Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME-MFC-16
Measurement of Fluid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME-MFC-18M
Measurement of Fluid Flow Using Variable Area Meters
ASME-MFC-19G
Technical Report - Wet Gas Metering Guideline
ASME-MFC-21.1
Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Controllers
ASME-MFC-21.2
Thermal Mass Meters - Dispersion Flowmeters
ASME-MFC-22
Measurement of Liquid by Turbine Flowmeters
ASME-MFC-26
Measurement of Gas Flow by Bellmouth Inlet Flowmeters
ASME-MFC-3M
Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
ASME-MFC-4M
Measurement of Gas Flow by Turbine Meters
ASME-MFC-5.1
Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters
ASME-MFC-5.3
Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters
ASME-MFC-6
Measurement of Fluid Flow in Pipes Using Vortex Flowmeters
ASME-MFC-7
Measurement of Gas Flow by Means of Critical Flow Venturis and Critical Flow Nozzles
ASME-MFC-8M
Fluid Flow in Closed Conduits: Connections for Pressure Signal Transmissions Between Primary and Secondary Devices
ASME-MFC-9M
Measurement of Liquid Flow in Closed Conduits by Weighing Method
NA
2003
2014
2001
2008
2015
2010
2007
2011
2004
1986
2011
2013
2013
2016
2001
1988
ASTM A269
Standard Specification for Seamless and Welded Austenitic Stainless-Steel Tubing for General Service.
2015
ASTM A276
Standard Specification for Stainless Steel Bars and Shapes.
ASTM A450/A450M
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes.
ASTM A479/A479M
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels.
2017
2021
2021
ASTM A789/A789M
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless-Steel Tubing for General Service.
2022
ASTM B265
Standard Specification for Titanium and Titanium Alloy Strip, Sheet and Plate.
ASTM B338
Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers.
ASTM B348
Standard Specification for Titanium and Titanium Alloy Bars and Billets.
2020
2017
2021
ASTM B444
ASTM B446
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852), Nickel-Chromium- Molybdenum Silicon Alloy (UNS N06219) Pipe and Tube.
2018
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625), Nickel- Chromium-Molybdenum Silicon Alloy (UNS N06219) and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar.
ASTM B706
Standard Specification for Seamless Copper Alloy (UNS C69100) Pipe and Tube.
2019
2018
ASTM B829
Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube.
2019
ASTM D 3764
Standard Practice for Validation of Process Stream Analyzer Systems and Correlation
ASTM D1945
Standard Test Method for Analysis of Natural gas by Gas Chromatography
ASTM D6122
Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM E 840-95
Standard Practice for Using Flame Photometric Detectors (FPD) in Gas Chromatography
BS 3463
BS 3463
BS 4800
BS 5839
Observation and gauge glasses for pressure vessels
Specification for observation and gauge glasses for pressure vessels
BS 4800 Colour Chart
Fire Detection and Fire Alarm Systems for Buildings - All Parts
2022
2014
2023
1995
1975
1975
2011
2021
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 30 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2011
2008
2011
2018
BS 6266
BS 6739
BS 7430
BS 7671
BS 8452
Fire protection for electronic equipment installations. Code of practice
Code of practice for instrumentation in process control systems: installation design and practice
Code of practice for protective earthing of electrical installations
Requirements for electrical installations
Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide
2010
BS EN 837
Pressure Gauges
CEN EN 12266-1
CEN EN 12266-2
Industrial valves Testing of Metallic valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements
Industrial Valves - Testing of Metallic Valves Part 2: Tests, Test Procedures and Acceptance Criteria Supplementary Requirements
1998
2012
2012
CENELEC EN 60947-5-6
Low-Voltage Switchgear and Control gear Part 5-6: Control Circuit Devices and Switching Elements DC Interface for Proximity Sensors and Switching Amplifiers (NAMUR)
2000
DIN 7081
Pressure resistant oblong sight glasses of borosilicate glass without limitation in the range of low temperature
EEMUA Publication 138
Design and installation of On-line analyser systems
EEMUA Publication 191
Alarm systems - a guide to design, management and procurement
EEMUA Publication 201
Control rooms: a guide to their specification, design, commissioning and operation
EI 15
EIA RS 232D
Model Code of Safe Practice Part 15: Area Classification Code for Installations, Handling Flammable Fluids.
Interface Between Data Terminal Equipment (DTE) and Data Circuit-Terminating Equipment (DCE) Employing Serial Binary Data Interchange
EIA RS 422
Electrical Characteristics of Balanced Voltage Digital Interface Circuits
EIA RS 485
Electrical Characteristics of Generators and Receivers for Use in Balanced Multipoint Systems
EN 10204
EN 50271
EN 50288
EN 50289
EN 50290
EN 54
Metallic Products – Types of inspection documents
Electrical Apparatus for the Detection and Measurement of Combustible Gases, Toxic Gases or Oxygen – Requirements and Tests for Apparatus using Software and/or Digital Technologies
Multi-element metallic cables used in analogue and digital communication and control
Communication cables. Specifications for test methods. Electrical test methods
Communication cables. Common design rules and construction.
Fire detection and fire alarm systems All parts
IEC 60079
Electrical apparatus for explosive atmospheres - All parts
IEC 60189 – 1 to 3
Low Frequency Cables and Wires with PVC Insulation and PVC Sheath
IEC 60227 – 1 to 7
Polyvinyl Chloride Insulated Cables of Rated Voltages Up To and Including 450/750 V
IEC 60228
Conductors of Insulated cables
IEC 60245 – 1 to 5
Rubber Insulated Cables - Rated Voltages Up To and Including 450/750 V
IEC 60255
Measuring relays and protection equipment
IEC 60331
Tests for electric cables under fire conditions
IEC 60332
Tests on electric and optical fibre cables under fire conitions
IEC 60364
Low Voltage Electrical Installations
IEC 60364-4-44
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60381
IEC 60382
IEC 60445
IEC 60529
Analogue signals for process control systems - All parts.
Analogue pneumatic signal for process control systems
Basic and Safety Principles for Man-Machine Interface, Marking and Identification - Identification of Equipment Terminals, Conductor Terminations and Conductors
Degrees of protection provided by enclosures (IP Code)
1999
2010
2013
2019
2015
NA
NA
NA
2004
2018
2013
2017
2021
Various
Various
2018
2012
2004
2012
Various
2018
Various
2005
2018
1982
1991
2021
2019
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 31 of 54
Item
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
IEC 60534-8
Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
IEC 60584
Thermocouples
IEC 60751
Industrial platinum resistance thermometers and platinum temperature sensors
2015
2021
2022
IEC 60770-1
Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
2011
IEC 60812
Failure modes and effects analysis (FMEA and FMECA)
IEC 60947-5-2
Low-voltage switchgear and control gear - Control circuit devices and switching elements - Proximity switches
IEC 61000
Electromagnetic Compatibility (EMC) - All parts.
IEC 61131
Programmable Controllers – All Parts
IEC 61280
Fibre optic communication subsystem basic test procedures - All Parts
IEC 61281-1
Fibre optic communication subsystems - Generic specification
IEC 61282
IEC 61285
IEC 61326-3
Fibre optic communication system design guide - All Parts
Industrial – Process Control-Safety of Analyzer Houses
Electrical equipment for measurement, control and laboratory use - EMC requirements - Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety).
IEC 61499
Function Blocks
I&C / Electrical
IEC 61508
Functional safety of electrical/electronic/ programmable electronic safety related systems
I&C / Electrical
IEC 61511
Functional safety. Safety instrumented systems for the process industry sector.
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
IEC 61515
Mineral insulated metal-sheathed thermocouple cables and thermocouples
IEC 61643
Low-voltage surge protection devices
IEC 61804
Function Blocks for Process Control
IEC 62305
Protection against lightning
IEC 62382
IEC 62443
Control systems in the process industry - Electrical and instrumentation loop check
Industrial communication networks - Network and system security
IEC 62444
Cable glands for electrical installations
IEC 62591
IEC 62734
Industrial communication networks – Wireless communication network and communication profiles – Wireless HART™
Industrial networks - Wireless communication network and communication profiles - ISA 100.11a
IEC TR 61831
On-line analyser systems - Guide to design and installation
IEC-60332
IEEE 1100
Tests on electric and optical fibre cables under fire conditions
Recommended Practice for Powering & Grounding Sensitive Electronic Equipment
IEEE 802.3
Local Area Network (LAN) protocols
IEEE STD 829
Standard for Software and System Test Documentation IEEE Computer Society Document
IEEE STD 830
Recommended Practice for Software Requirements Specifications
ISA 18.1
ISA 18.2
ISA 5.1
ISA 5.2
ISA 5.3
ISA 5.4
Annunciator Sequences and Specifications
Management of Alarm Systems for the Process Industries
Instrument Symbols and Identification
Binary Logic Diagrams for Process Operation
Graphic Symbols for Distributed Control/Shared Display Information, Logic and Computer Systems
Instrument Loop Diagrams
2018
2019
Various
2017
2022
2017
2022
2015
2017
2012
2010
2017
2016
2020
2020
2010
2012
2010
2010
2016
2019
2011
2018
2005
2022
2008
1998
1979
2016
2022
1976
1983
1991
Item
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 32 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
ISA 5.5
Graphic Symbols for Process Displays
ISA 7.0.01
Quality Standard for Instrument Air
ISA 71.01
Environmental Conditions for Process Management and Control System, Temperature and Humidity
1985
1996
1985
ISA 84.91.01
Identification and Mechanical Integrity of Safety Controls, Alarms, and Interlocks in the Process Industry
2021
ISA 92.00.01
Performance Requirements for Toxic Gas Detectors
ISA 92.00.02
Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments
ISA 92.04.01
Performance Requirements for Instruments used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ISA RP60.1
Control Centre Facilities
ISA RP60.3
Human Engineering for Control Centres
ISA S71.04
Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants
ISA TR 101.02
HMI Usability and Performance
ISA TR96.05.01
Partial Stroke Testing of Automated Valves
ISA-RP75-23
Consideration for Evaluating Control Valve Cavitation
ISO 10005
Quality management — Guidelines for quality plans
ISO 10101-1,2,3
Determination of Water in Natural Gas
ISO 10790
Measurement of Fluid Flow in closed conduits- Guidance to selection, installation and use of Coriolis meters (mass flow, density, and volume flow measurements)
ISO 10816-3
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts
ISO 11064 - All
Ergonomic Design of Control Centres
ISO 12242
ISO 12242
Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
Measurement of fluid flow in closed conduits — Ultrasonic transit-time meters for liquid
2010
2013
2007
1990
2013
2013
2019
2017
1995
2018
2022
2015
2009
2006
2012
2012
ISO 12944
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — All parts.
2017
ISO 14511
Measurement of Fluid Flow in Closed Conduits – Thermal Mass Flowmeters
ISO 15156 / NACE MR 0175
Material for use in H2S containing environments in oil and gas production
I&C / Piping
ISO 15848-1
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves.
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
ISO 15848-2
Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves.
ISO 15971
CV & Wobbe Index Measurement
ISO 17089-1
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas
ISO 17089-1
ISO 17089-2
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1: Meters for custody transfer and allocation measurement
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 2: Meters for industrial applications
ISO 17945 / NACE MR0103
Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulphide stress cracking in corrosive petroleum refining environments
ISO 23874
GC Requirement for Hydrocarbon Dew point Measurement
ISO 27895
Isolating Valves for Low-Temperature Applications.
ISO 28921-1
Isolating Valves for Low-Temperature Applications.
ISO 28921-2
Isolating Valves for Low-Temperature Applications.
ISO 5167 Parts 1 to 6
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - All parts.
ISO 5168
ISO 5208
Measurement of fluid flow — Procedures for the evaluation of uncertainties
Industrial valves — Pressure testing of metallic valves
2019
2020
2015
2015
2008
2019
2019
2010
2015
2006
2009
2022
2015
2022
2005
2015
Item
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 33 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
Item
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
I&C
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
ISO 5210
ISO 5211
ISO 6974-4
ISO 6974-5
ISO 6974-6
ISO 6976
ISO 7240
Industrial valves — Multi-turn valves actuator attachments
Industrial valves — Part-turn actuator attachments
Natural gas –Determination of composition with defined uncertainty by Gas Chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on- line measuring system using two columns
2017
2017
2001
Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons
2014
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
Calculation of Calorific values, density, density and Wobbe index from composition
Fire detection and alarm systems
NAMUR NE 21
Electromagnetic Compatibility of Equipment for Industrial Processes and Laboratory
NAMUR NE 43
Transmitters 4-20mA Current Failure Alarm Limits
NAMUR NE-107
Self-Monitoring and Diagnosis of Field Devices
NFPA 72
NFPA 76
National Fire Alarm and Signalling Code
Standard for the Fire Protection of Telecommunications Facilities
ISO 10723
Natural gas - Performance evaluation for on-line analytical systems
ISO 8943
Refrigerated light hydrocarbon fluids - Sampling of liquefied natural gas - Continuous and intermittent methods
ISO 6142-1
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures
2015
API-RP-2A WSD
Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms – Working Stress Design
2014
BI5963-RHD-ZZ-XX-RP-Z- 0001
Export Marine Jetty Facilities for LNG Growth Project, Location Selection & Concept study
2022
RH Report and not a Standard
BS EN 1990:2002+A1:2005
Basis of Structural design
2002+A1:200 5
BS EN 1991-1-1:2002
Eurocode 1: Action on structures - Part 1 -1: General actions – Densities, self-weight, imposed loads for buildings
2002
BS EN 1991-1-4 :2005 +A1 2010
Eurocode 1: Action on structures - Part 1-4: General actions – Wind actions
BS EN 1991-1-5:2003
Eurocode 1: Action on structures - Part 1-5: General actions –Thermal actions
2005 +A1 2010
2003
BS EN 1991-4:2006
Eurocode 1: Actions on structures - Part 4: Silos and tanks
2006
Not Applicable
BS EN 1992-1-1
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings,bridges and civil engineering structures.
2023
BS EN 1992-2:2005
Eurocode 2: Design of concrete structures - Part 2: Concrete bridges – Design and detailing rules
BS EN 1993-1-1
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
2005
2022
BS EN 1996-1-1:2005
Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures
2005
Not Applicable
BS EN 1996-2:2006
Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry
2006
Not Applicable
BS EN 1997-1:2004+A1:2013
Eurocode 7: Geotechnical design - Part 1 General rules
2004+A1:201 3
BS EN 1997-2:2007
Eurocode 7: Geotechnical design - Part 2: Ground investigation and testing
2007
BS EN 1998-1:2004+A1:2013
Eurocode 8: Design of structures for earthquake resistance – Part 1:General rules, seismic actions and rules for buildings
2004+A1:201 3
BS EN 1998-5:2004
Eurocode 8: Design of structures for earthquake resistance – Part 5: Foundations, retaining structures and geotechnical aspects
2004
BS EN 206:2013+A2:2021
Concrete — Specification, performance, production and conformity
2013+A2:202 1
BS EN 771-1:2011
Specification of clay masonry units
2011
Not Applicable
BS EN 8500-1:2023
BS6349-1-1:2013 2016+A1:2017
Concrete – Complementary British Standard to BS EN 206: Part 1: Method of specifying and guidance for the specifier
2023
Maritime works - Part 1-1 - General – Code of practice for planning and design for operations
BS6349-1-2:2017
Maritime works - Part 1-2 - General – Code of practice for assessment of actions
BS6349-1-3 :2021
Maritime works - Part 1-3 - General – Code of practice for geotechnical design
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 34 of 54
2005
2016
2017
2017
2021
NA
2021
2019
2013
2007
2013
2017
2021
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
Marine
BS6349-1-4 :2021
Maritime works - Part 1-4 - General – Code of practice for materials
BS6349-2:2019
Maritime works - Part 2: Code of practice for the design of quay walls, jetties and dolphins
BS6349-4:2014
Maritime works - Part 4: Code of Practice for design of fendering and mooring systems
BS6349-5:2016
Maritime structures. Code of practice for dredging and land reclamation
IALA
MEG 4
NAVGUIDE, Marine Aids to Navigation Manual
Mooring Equipment Guidelines (MEG4)
PIANC Report N◦116
Safety Aspects Affecting the Berthing Operations of Tankers to Oil and Gas Terminals”
PIANC Report N◦153
Recommendations for the design and assessment of marine Oil and Petrochemical terminals
PIANC Report N-172
Design of small to mid-scale marine LNG terminals including bunkering
PIANC WG 211
PIANC Fender Guidelines
Port designer’s handbook
Port designer’s handbook (second edition) by Carl A.Thoresen
Mechanical
AC 70/7460-1K
FAA Advisory Circular – Obstruction Marking and Lighting
2021
2019
2014
2016
2023
2018
2012
2022
2021
2024
2014
2020
Mechanical
AGMA 2001-D04
Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
2004 (2010)
Mechanical
AGMA2001-D04
Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth
2010
Mechanical
API PUBL 2510A
Fire Protection Considerations for the Design and Operation of Liquefied Petroleum Gas (LPG) Installations
1996 (R 2015)
Mechanical
API RP 686
Machinery Installation and Installation Design
Mechanical
API SPEC 12D
Specification for Field Welded Tanks for Storage of Production Liquids
Mechanical
API SPEC 12F
Specification for Shop Welded Tanks for Storage of Production Liquids
Mechanical / Process
API STD 2000
Venting Atmospheric and Low Pressure Storage Tanks—Nonrefrigerated and Refrigerated
Mechanical
API STD 2510
Design and Construction of Liquefied Petroleum Gas (LPG) Installations
Mechanical
API STD 610
Centrifugal Pumps for Petroleum Petrochemical and Natural Gas Industries
Mechanical
API STD 613
Special-Purpose Gear Units for Petroleum Chemical and Gas Industry Services
Mechanical
API STD 614
Lubrication Shaft-Sealing and Control-Oil systems and Auxiliaries for Petroleum Chemical and Gas Industry Services
2009
2017
2019
2014 (R 2020)
2020
2021
2021
2022
Mechanical
API STD 616
Gas Turbines for the Petroleum Chemical and Gas Industry Services
2011
Not Applicable
Mechanical
API STD 617
Axial and Centrifugal Compressors and Expander-Compressors for Petroleum Chemical and Gas Industry Services
2014
Mechanical
API STD 618
Reciprocating Compressors for Petroleum Chemical and Gas Industry Services
Mechanical
API STD 619
Rotary Type Positive Displacement Compressors for Petroleum Petrochemical and Natural Gas Industries
Mechanical
API STD 620
Design and Construction of Large Welded Low-Pressure Storage Tanks
Mechanical
API STD 625
Tank Systems for Refrigerated Liquefied Gas Storage
Mechanical / CSA
API STD 650
Welded Steel Tanks for Oil Storage
Mechanical
API STD 660
Shell and Tube Heat Exchangers for General Refinery Services
Mechanical
API STD 661
Air Cooled Heat Exchangers for General Refinery Services
Mechanical
API STD 670
Machinery Protection Systems
Not Applicable
2007 (R 2016)
2010
2013, Addend 2014, 2018, 2021
2010
2020 + Errata 2021
2015
2013 (R 2018)
2014 (R 2022)
Mechanical
API STD 672
Packaged Integrally Geared Centrifugal Air Compressors for Petroleum Chemical and Gas Industry Services
2019
Mechanical
API STD 675
Positive Displacement Pumps – Controlled Volume
Mechanical
API STD 676
Positive Displacement Pumps – Rotary
Mechanical
API STD 677
General-Purpose Gear Units for Petroleum Chemical and Gas Industry Services
2012 (R 2021)
2022
2021
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 35 of 54
Item
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
Mechanical
API STD 682
Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2014 (R 2022)
Mechanical
API STD 685
Seamless Centrifugal Pumps for Petroleum Heavy Duty Chemical and Gas Industry Services
Mechanical
ASME B73.1
Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
Mechanical
ASME B73.2
Specification for Vertical In-line Centrifugal Pumps for Chemical Process
Mechanical
ASME BPVC
Boiler and Pressure Vessel Code and Boiler and Pressure Vessel Code including all mandatory addenda
Mechanical
ASME PTC-10
Test Code on Compressors & Exhausters
Mechanical
ASME PTC-25
Pressure Relief Devices
Mechanical
ASTM A516/516M
Pressure Vessel Plates Carbon Steel for Moderate and Lower Temperature Service
Mechanical
ASTM A541/541M
Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components Public Information
Mechanical
ASTM A553/553M
Pressure Vessel Plates Alloy Steel Quenched and Tempered 8 and 9 Percent Nickel
Mechanical
ASTM A90/A90M
Standard Test Method for Weight (Mass) of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
Mechanical
ASTM B117
Standard Practice for Operating Salt Spray (Fog) Apparatus
Mechanical
ASTM B695
Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
2011
2020
2016
2021
1997
2019
2015
2020
2017
2021
2019
2021
Mechanical
ASTM C131/C131M
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
2020
Mechanical
ASTM C591
Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
2021
Mechanical
ASTM C795
Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel Public Information
2008 (R 2018)
Mechanical
ASTM C871
Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride Fluoride Silicate and Sodium Ions
2018
Mechanical
ASTM D1654
Standard Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
2017
Mechanical
ASTM D2000
Standard Classification System for Rubber Products in Automotive Applications
Mechanical
ASTM D2240
Standard Test Method for Rubber Property – Durometer Hardness
Mechanical
ASTM D2244
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
Mechanical
AWS A2.1
Welding Symbols
Mechanical
AWS A2.4
Standard Symbols for Welding, Brazing and Non-destructive Examination
Mechanical
AWS A3.0
Standard Welding Terms and Definitions
Mechanical
AWS A5.1/5.1M
Covered Carbon Steel Arc-Welding Electrodes
Mechanical
AWS A5.11
Specification for Nickel and Nickel Alloy Welding Electrodes for Shield Metal Arc Welding
Mechanical
AWS A5.14
Specification for Nickel and Nickel Alloy Bare Welding Electrodes and Rod
Mechanical
AWS A5.17
Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
Mechanical
AWS A5.5
Low-Alloy Steel Covered Arc-Welding Electrodes
Mechanical
AWS D1.1/D1.1M
Structural Welding Code – Steel
Mechanical
AWS D1.4/D1.4M
Structural Welding Code – Reinforcing Steel
Mechanical
AWWA D100
Standard for Welded Steel Tanks for Water Storage
Mechanical
Mechanical
Mechanical
HMI
IMC
IPC
HMI Safe Hoisting Practices Bulletin
International Mechanical Code (IMC)
International Plumbing Code (IPC)
Mechanical
NACE MR0103
Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
Mechanical
NACE SP 0169
Control of External Corrosion on Underground or Submerged Metallic Piping Systems
2018
2015 (R 2021)
2021
2020
2020
2001
2019
2018
2018
2019
2014
2020
2018
2021
NA
2023
2023
2015
2013
Item
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 36 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
Mechanical
NACE SP 0187
Design Consideration for Corrosion Control of Reinforcing Steel in Concrete Structure
Mechanical
NACE SP 0188
Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
Mechanical
NFPA 59A
Standard for the Production, Storage, and Handling of Liquefied Natural Gas (LNG)
Mechanical
Mechanical
Mechanical
Part A
Part B
Part C
Ferrous Materials
Nonferrous Materials
Electrodes and Filler Materials
Mechanical
ASME BPVC Section I
Power Boilers
Mechanical
ASME BPVC Section II
Material Specifications
Mechanical
ASME BPVC Section IV
Heating Boilers
Mechanical
ASME BPVC Section IX
Welding and Brazing Qualifications
Mechanical
ASME BPVC Section V
Non-destructive Examination
Mechanical
ASME BPVC Section VIII
Pressure Vessels Division 1
Mechanical
ASME BPVC Section VIII
Pressure Vessels Division 2 -Alternative Rules
Mechanical
ASME BPVC Section XIII
Rules for Overpressure Protection
Mechanical
TEMA
Standards of the Tubular Exchanger Manufacturers Association
Mechanical
WRC 297
Local Stresses in Cylindrical Shells Due to Eternal Loadings on Nozzles
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2017
1999
2019
2021
2021
2021
2023
2023
2023
2023
2023
2023
2023
2023
2019
1984
Mechanical
WRC 537
Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells due to External Loadings for Implementation of WRC Bulletin 107.
2022
Mechanical
WRC BULLETIN 537
Precision Equations and Enhanced Diagrams for Local Stresses in Spherical and Cylindrical Shells Due to External Loadings
2020
Mechanical / Storage Tanks ACI 376
Code Requirements for Design and Construction of Concrete Structures for the Containment of Refrigerated Liquefied Gases and Commentary
Mechanical
OCIMF 4, 4th Ed.
Design and Construction Specification for Marine Loading Arms
Mechanical
OCIMF 30
Recommendations for Manifolds for Refrigerated Liquefied Natural Gas Carriers
Mechanical
API STD 692
Dry Gas Sealing Systems for Axial, Centrifugal, and Rotary Screw Compressors and Expanders
Mechanical
API STD 668
Brazed Aluminium Plate-fin Heat Exchangers
Mechanical
API STD 537
Flare Details for Petroleum, Petrochemical, and Natural Gas Industries
Mechanical
API Spec 9A
Specification for Wire Rope
Mechanical
ASME B30.16
Overhead Underhung and Stationary Hoists
Mechanical
ASME B30.17
Cranes and Monorails (With Underhung Trolley or Bridge) Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings.
Mechanical
ASME NUM-1
Thermoplastic Piping Systems
Mechanical
ASTM F 1166
Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
Mechanical
BS 2853
Specification for the testing of steel overhead runway beams for hoist blocks
Mechanical
BS 4278
Specification for Eye Bolts for Lifting Purposes
Mechanical
BSI BS EN ISO 3266 + A1
Forged steel eyebolts grade 4 for general lifting purposes
2011
2019
2018
2018
2018
2017 + Addedum 2020
2023
2022
2020
2023
2023
2011
1984
2015
Superseeded by BSI BS EN ISO 3266 + A1
Mechanical
BS7333
Specification for Slewing jib cranes
1990
Withdrawn
Mechanical
BSI BS 7121-2-1
Code of practice for the safe use of cranes Part 2-1: Inspection, maintenance and thorough examination
- General
2015
Mechanical
BS 7121-3
Code of practice for safe use of cranes Part 3: Mobile cranes
Mechanical
BS EN 13000
Cranes - Mobile cranes
2019
2014
Mechanical
BS EN 13000-1
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation
2021
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 37 of 54
Item
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
Mechanical
CMAA-70
Crane Manufacturers Association of America (CMAA) Specification No.70
Mechanical
CMAA-74
Crane Manufacturers Association of America (CMAA) Specification No.74
Mechanical
EN 13127
Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems
Mechanical
EN 15011
Cranes. Bridge and gantry cranes
Mechanical
ISO 2330
Fork-lift trucks — Fork arms — Technical characteristics and testing
Mechanical
ISO 10245
Cranes — Limiting and indicating devices — Part 1: General
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2020
2020
2012
2020
2002
2021
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
16 TAC 8
Texas Administrative Code; Economic Regulation; Railroad Commission of Texas; Pipeline Safety Regulations
2022
Not Applicable
49 CFR Part 192
Transportation of Natural and Other Gas by Pipeline; Minimum Federal Safety Standards
AGA PPP
Operating Section Report, Purging Principles and Practice
ANSI B 16.5
Pipe Flanges and Flanged Fittings
ANSI/AWWA C200
Steel Water Pipe – 6 in. and Larger
API 594
API 599
API 6FA
Check Valves: Wafer, Wafer Lug and Double Flanged type.
Metal Plug Valves – Flanged and Welding Ends
Specification for Fire Test for Valves
2023
2011
2020
2023
2022
2020
2020
API RP 1102
Steel Pipelines Crossing Railroads and Highways
2007 (R2017)
API RP 505
Recommended Practices for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1 and Zone 2
API RP 582
Welding Guidelines for the Chemical, Oil, and Gas Industries
API RP 752
Management of Hazards Associated with Location of Process Plant Buildings
API RP 753
Management of Hazards Associated with Location of Process Plant Portable Buildings
API RP 941
Steel for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical Plants
API SPEC 5L
Specification for Line Pipe
API SPEC 6D
Specification for Pipeline Valves
API STD 2610
Design, Construction, Operation, Maintenance, and Inspection of Terminal & Tank Facilities
API STD 598
Valve Inspection and Testing
API STD 600
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
2018
2023
2024
2024
2016
2018
2021
2018
2023
2021
API STD 602
Steel Gate Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries
2022
API STD 607
Testing of Valves – Fire Type-testing Requirements
API STD 609
Butterfly Valves: Double Flanged Lug and Wafer Type
ASME B16.9
Factory made Wrought Steel Butt Welding Fittings
ASME B18.2.2
Square and Hex Nuts (Inch Series)
ASME B18.22.1
Plain Washers
2022
2021
2018
2022
2009 (R2016)
Superseded by ASME B18.21.1 2009 (R2016)
ASME B18.21.1
Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series)
2009 (R2016)
ASME B1.1
Unified Inch Screw Threads (UN, UNR, and UNJ Thread Forms)
ASME B1.20.1
Pipe Threads General Purpose (Inch)
ASME B16.1
Cast Iron Pipe Flanges and Flanged Fittings Classes 25
ASME B16.10
Face to Face and End to End Dimensions of Valves
ASME B16.11
Forged Fittings, Socket-Welding and Threaded
2019
2013 (R 2018)
2020
2022
2021
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 38 of 54
Item
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
ASME B16.20
Metallic Gaskets for Pipe Flanges: Ring Joint Spiral Wound and Jacketed
ASME B16.21
Non-metallic Flat Gaskets for Pipe Flanges
ASME B16.25
Buttwelding Ends
ASME B16.3
Malleable Iron Threaded Fittings
ASME B16.34
Valves – Flanged, Threaded and Welding Ends
ASME B16.36
Orifice Flanges
ASME B16.48
Steel Line Blanks
ASME B16.5
Pipe Flanges and Flanged Fittings—NPS ½ through 24
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2023
2021
2022
2021
2020
2020
2020
2020
ASME B18.2.1
Square and Hex Bolts and Screws (UN and UNR Thread Form)
2012 (R2021)
ASME B31.1
Power Piping
ASME B31.3
Process Piping
ASME B31.5
Refrigeration Piping and Heat Transfer Components
ASME B31.8
Gas Transmission and Distribution Piping Systems
ASME B36.10M
Steel Pipe
ASME B36.19M
Stainless Steel Pipe
ASME NM.2
Glass-Fibre-Reinforced Thermosetting-Resin Piping Systems
ASME PCC-1
Guidelines for Pressure Boundary Bolted Flange Joint Assembly
ASME RTP-1
Reinforced Thermoset Plastic Corrosion Resistant Equipment
ASNT CP-189
Qualification and Certification of Non-destructive Testing Personnel – Item No. 2508, Includes CP-105
ASTM A105
Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A123/123M
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM A182
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A193/193M
Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
ASTM A194/194M
Carbon and Alloy Steel Nuts for Bolts for high-Pressure or High-Temperature Service or Both
ASTM A234
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A240/240M
Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A307
Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM A312
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A320
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
2022
2022
2022
2022
2022
2022
2022
2022
2023
2020
2024
2017
2024
2024
2024
2024
2024
2021
2024
2024
ASTM A350
ASTM A358
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
2024
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
2024
ASTM A36
Carbon Structural Steel
ASTM A387
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
ASTM A403
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
2019
2017 (R 2023)
2022
2024
ASTM A420
ASTM A453
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low- Temperature Service
Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
2017 (R 2024)
ASTM A522/522M
Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges Fittings Valves and Parts for Low Temperature Service
2022
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 39 of 54
Item
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
ASTM A53/53M
Welded and Seamless Steel Pipe
ASTM A653/A653M
Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc- Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A691
ASTM A815
Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM C450
Fabrication of Thermal Insulating Fitting Covers for NPS Piping and Vessel Lagging
ASTM C533
Calcium Silicate Block and Pipe Thermal Insulation
2024
2023
2019
2024
2018
2017 (R 2023)
ASTM C581
ASTM C585
Standard Practices for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fibre- Reinforced Structures Intended for Liquid Service
2020
Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System)
ASTM D1598
Standard Test Method for Time-to-Failure of Plastic Pipe under Constant Internal Pressure
ASTM D1599
ASTM D2105
Standards Test Method for Resistance to Short Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
2018
Standard Test method for longitudinal tensile properties of “fiberglass” (fibre-reinforced-thermosetting resin) pipe and tube.
2001 (R2019)
ASTM D2143
Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2412
Standards Test Method for External Loading Characteristics of Plastic Pipe by Parallel Plate Loading
2021
2021
ASTM D2563
Standard Practice for Classifying Visual Defects in Glass Reinforced Plastic Laminate Parts
2008 (2015) Withdrawn
ASTM D2583
Standard Test Methods for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
2013
Withdrawn
ASTM D2584
Standard Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D2774
Standard Practice for Underground Installation of Thermoplastic Pressure Piping
ASTM D2992
ASTM D3261
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fibre Reinforced Thermosetting Resin) Pipe and Fittings
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3350
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3418
ASTM D3567
ASTM D3681
ASTM D3839
ASTM D4024
ASTM D5421
Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
Standards Practice for Determining Dimensions of “Fiberglass” (Glass Fibre Reinforced Thermosetting Resin) Pipe and Fittings
2017 (R2022)
Standard Test Method for Chemical Resistance of “Fiberglass” (Glass-Fibre-Reinforced Thermosetting- Resin) Pipe in a Deflected Condition
2018
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fibre Reinforced Thermosetting- Resin) Pipe
2014 (R2019)
Standard Specification for Machine Made “Fiberglass” (Glass Fibre-Reinforced Thermosetting Resin) Flanges
2022
Standard Specification for Contact Moulded ‘Fiberglass’ (Glass Fibre Reinforced Thermosetting Resin) Flanges
2023
2022
2023
2018
2021
2022
2024
2021
2021
ASTM D543
Standard Test method for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D570
Standards Test Methods for Water Absorption of Plastics
ASTM D638
Standard Test Method for Tensile Properties of Plastics
ASTM D696
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer.
ASTM F2880
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe
ASTM F714
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
ASTM G90
Standard Practice for Performing Accelerated
AWWA C111/A21.11
Rubber-Gasket Joints for Ductile0Iron Pressure Pipe & Fittings
AWWA C207
Steel Pipe Flanges for Waterworks Service, Sizes 4 inch Through 144 inch (100 mm through 3,600 mm)
AWWA M45
Manual for Fiberglass Pipe Design
2021
2022
2022
2016
2021
2024
2023
2017
2023
2013
BS 3396-1
Woven Glass Fibre Fabrics for Plastics Reinforcement - Part 1: Specification for Loom-State Fabrics
1991 (R2020)
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 40 of 54
Item
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
BS 3396-2
Woven Glass Fibre Fabrics for Plastics Reinforcement - Part 2: Specification for Desized Fabrics
1987 (R2017)
BS 3396-3
Woven Glass Fibre Fabrics for Plastics Reinforcement - Part 3: Specification for Finished Fabrics for Use with Polyester Resin Systems
1987 (R2017)
BS 6364
Valves for Cryogenic Service
BS EN 14020-1
Reinforcements Specification for textile glass rovings Part 1: Designation
Withdrawn
1984 (R 1991) (R2007)
2002
BS EN 14020-2
Reinforcements Specification for textile glass roving’s Part 2: Methods of test and general requirements
2002
BS EN 14020-3
Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
BS EN 1473
Installation of Equipment for Liquefied Natural Gas – Design Onshore Installations
2002
2021
BS EN ISO 1452-1
BS EN ISO 1452-2
BS EN ISO 1452-3
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 1: General
2010 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 2: Pipes
2010 (R2019)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) Part 1: fittings
2012
Centre for Chemical Process Safety (CCPS)
Guidelines for Facility Sitting and Layout
2003
Withdrawn
EN 10204
FERC 683
FM 1614
Inspection Documents for the Delivery of Metallic Products
Rule Revision on Critical Infrastructure Information (including LNG industry) 10/06
Fibre Reinforced Composite (FRC) pipes & Fittings for U/G Fire protection Service
GAP 2.5.2
Oil and Chemical Plant Layout and Spacing
GAP 2.5.2A
Hazard Classification of Process Operations for Spacing Requirements
ISO / IEC 17025
General requirements for the competence of testing and calibration laboratories
Plastics piping systems – Glass Reinforced Thermosetting Plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack from the inside of a section in a deflected condition
Plastics - Differential scanning calorimetry (DSC) - Part 2: determination of glass transition temperature and glass transition step height
2020
Plastics - Thermomechanical Analysis (TMA) - Part 2: Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature
Textile-glass-reinforced plastics – Pre-pregs, moulding compounds and laminates – Determination of the textile-glass and mineral-filler content – Calcination methods
Petroleum and Natural Gas Industries: Glass Reinforced Plastics (GRP) Piping Part 1 Vocabulary, Symbols, Applications and Materials Part 2 Qualification and Manufacture
Paints and varnishes — Methods of exposure to laboratory light sources Part 1: General guidance
Paints and varnishes — Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
2004
2006
2022
2000
2000
2017
2021
2021
2023
2017
2013
2021
2018
ISO 19011
Guidelines for auditing management systems
Reinforced plastics based on unsaturated polyester resins - Determination of residual styrene monomer content
2011
Quality management systems - Fundamentals and vocabulary
Quality management systems - Requirements
Managing for the sustained success of an organization - A quality management approach
Non-destructive testing - Qualification and certification of NDT personnel
ISO TR 10465
Underground Installation of Flexible Glass-Reinforced Thermosetting Resin (GRP) Pipes Part 1: Installation Procedure Part 2: Comparison of static calculation methods
MSS SP-25
Standard Marking System for Valves Fittings Flanges and Unions
MSS SP-44
Steel Pipeline Flanges
MSS SP-53
MSS SP-54
MSS SP-55
Quality Standard for Steel Castings and Forgings for Valves Flanges and Fittings and Other Piping Components – Magnetic Particle Examination Method
Quality Standard for Steel Castings and Forgings for Valves Flanges and Fittings and Other Piping Components – Radiographic Examination Method
Quality Standard for Steel Castings and Forgings for Valves Flanges and Fittings and Other Piping Components – Visual Method for Evaluation of Surface Irregularities
MSS SP-58
Pipe Hangers and Supports - Materials
Part-1 Superseded by ISO TS 10465-1
2015
2015
2018
2021
2007
2018
2019
2021
2013
2011
2018
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 41 of 54
ISO 10952
ISO 11357-2
ISO 11359-2
ISO 1172
ISO 14692
ISO 16474-1
ISO 16474-3
ISO 4901
ISO 9000
ISO 9001
ISO 9004
ISO 9712
Item
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
Piping
MSS SP-67
Butterfly Valves
MSS SP-68
High Pressure – Offset Seat Butterfly Valves
MSS SP-93
MSS SP-94
Quality Standard for Steel Castings and Forgings for Valves Flanges and Fittings and Other Piping Components – Liquid Penetrant Examination Method
Quality Standard for Steel Castings and Forgings for Valves Flanges and Fittings and Other Piping Components – Ultrasonic Examination Method
MSS-SP-09
Spot Facing for Bronze, Iron, and Steel Flanges
2022
2021
2024
2020
2018
MSS-SP-97
Integrally Reinforced Forged Branch Outlet Fittings – Socket Welding, Threaded, and Buttwelding Ends
2019
PFI ES-24
Pipe Bending Methods, Tolerances, Process, and Material Requirements
2015
PFI ES-3
PFI ES-5
Fabrication Tolerances
Standard Cleaning
Process / I&C
API STD 520 Part 2
Sizing Selection and Installation of Pressure Relieving Devices in Refineries Part 2-Installation
Process / I&C
API STD 520 Part 1
Sizing Selection and Installation of Pressure Relieving Devices in Refineries Part 1-Sizing and Selection
Process
API STD 521
Pressure-relieving and Depressuring Systems - Sixth Edition
Process / I&C
API STD 526
Flanged Steel Safety Relief Valves for Flanged Pressure Relief Valves
Project
ASTM SI10
Standard for the Use of the International System of Units (SI): the Modern Metric System
Process
ISO 6976
Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
Process
NFPA 59A
Standard for the Production, Storage and Handling of Liquefied Natural Gas (LNG)
Telecom
BS 4196
Sound Power Levels of Noise Sources - All Parts
Telecom
BS 5839
Fire detection and fire alarm systems for buildings - All Parts
Telecom
BS 6259
Code of practice for the design, planning, installation, testing and maintenance of sound systems
Telecom
BS 6701
Telecommunications equipment and telecommunications cabling – Specification for installation, operation and maintenance
Telecom
BS 6840
Sound System Equipment - All Parts
Telecom
BS 7430
Code of practice for protective earthing of electrical installations
Telecom
BS 7629-1
Standard for Fire Resistant Multi-core Cables
Telecom
BS 7671
Requirements for Electrical Installations. IET Wiring Regulations
Telecom
BS 7958
CCTV Management and Operation
Telecom
BS EN 50173
Information technology - Generic cabling systems - All Parts
Telecom
BS EN 50174
Information technology – Cabling installation - All Parts
Telecom
BS EN 50200
Method of test for resistance to fire of unprotected small cables for use in emergency circuits
Telecom
BS EN 50289
Communication Cables - Specifications for Test Methods - All Parts
Telecom
BS EN 50290
Communication Cables - All Parts
Telecom
BS EN 50310
Telecommunications bonding networks for buildings and other structures
Telecom
DIN 41494-8
Mechanical structures for electronic equipment; mechanical structures of the 482,6 mm (19”) series; components on front panels; mounting conditions, dimensions
Telecom
DIN 75490
Radio Communication Devices in Motor Vehicles; Installation Space, General Requirements
2009 (R2016)
2013
2020
2020 + Errata 2023
2014(APCI) & 2020 + Errata 2022
2023
2016
2016
2023
1991
2021
2015
2017
1998
2011
2019
2022
2015
2018
2020
2015
2001
2015
2020
1986
1993
Telecom
DS/CLC/TR 5042
Assessment of Inadvertent Ignition of Flammable Atmospheres by Radio-Frequency Radiation - Guide
2021
Telecom
EC 62149
Fibre optic active components and devices – Performance standards – All Parts
Telecom
EEC/2002/95
Hazardous Substances in Electrical and Electronic Equipment
Telecom
EEC/94/9
ATEX Guidelines
2020
2003
1994
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 42 of 54
Item
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
Telecom
EEC/94/95
Electromagnetic Compatibility in Vehicles
1995
Telecom
ETS 300 003
Business Telecommunications (BT); Transmission Characteristics of Digital Private Automatic Branch Exchanges (PABXs) (TE 10- 01)
1991
Telecom
ETS 300 004
Business Telecommunications (BT); Transmission characteristics at 2-wireAnalogue Interface of a Digital Private Automatic Branch Exchanges(PABX) (TE 10-02)
Telecom
ETS 300 006
Business Telecommunications (BT); Transmission Characteristics at Digital Interfaces of a Digital Private Automatic Branch Exchanges (PABX) (TE 10-04)
Telecom
ETS 300 010
Transmission and Multiplexing (TM); Synchronous Cross Connect Equipment 64 and N x 64 kbit/s Cross Connection Rate 2048 kbit/s Access Ports
Telecom
ETS 300 011
Integrated Services Digital Network (ISDN); Primary Rate User – Network Interface Layer 1 Specification and Test Principles
Telecom
ETS 300 012
Integrated Services Digital Network (ISDN); Basic User - Network Interface Layer 1 Specification and Test Principle
Telecom
ETS 300 019
Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment
Telecom
ETS 300 402
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. One (DSS1) Protocol; Data Link Layer
Telecom
ETS 300 403
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. One (DSS1) Protocol; Signalling Network Layer for Circuit-Mode Basic Call Control
1991
1991
1995
1992
1992
1994
1995
1995
Telecom
ETSI EN 300 417
Transmission and Multiplexing (TM); Generic requirements of transport functionality of equipment - All Parts
2003
Telecom
ETSI EN 301 489 - all Parts
Electromagnetic Compatibility (EMC) standard for radio equipment and services
Telecom
ETSI EN 301 925
Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
Telecom
ETSI EN 302 885 - all Parts
Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated DSC
2019
2020
2014
Telecom
ETSI TR 102 398
Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) General System Design
2018
Telecom
ETSI TS 102 361
all Parts Electromagnetic compatibility and Radio spectrum Matters (ERM); Digital Mobile Radio (DMR) Systems
2021
Telecom
IEC 1000-4-2
Testing and measurement techniques of Electrostatic discharge immunity test
Telecom
IEC 1000-4-3
Testing and measurement techniques of Electrostatic discharge immunity test
Telecom
IEC 1000-4-4
Testing and measurement techniques of electrical fast transients/burst immunity test
Telecom
IEC 1000-4-6
Testing and measurement techniques of electrical fast transients/burst immunity test
Telecom
IEC 10373
Identification Cards
Telecom
IEC 215
Safety requirements of radio transmitting equipment
Telecom
IEC 479-1
Guide on the effects of current passing through the human body
Telecom
IEC 60027-2
Letter symbols to be used in electrical technology: Telecommunications and Electronics
Telecom
IEC 60028
Conductors of Insulated Cables
Telecom
IEC 60038
IEC Standard Voltages
Telecom
IEC 60065
Audio, video and similar electronic apparatus – safety requirements
Telecom
IEC 60073
Basic Safety principles for man-machine interface, marking and identification
Telecom
IEC 60079
Electrical Apparatus for Explosive Gas Atmospheres
Telecom
IEC 60096
Radio-Frequency Cables (Pat 0 to Part 3)
Telecom
IEC 60099
Surge Arrestors
Telecom
IEC 60228
Conductors of Insulated Cables
Telecom
IEC 60244
Methods of Measurement for Radio Transmitters
Telecom
IEC 60269
Electrical Apparatus for Explosive Gas Atmospheres
Telecom
IEC 60297
Dimensions of Mechanical Structures of the 482.6 mm (19 inch) - All Parts
Telecom
IEC 60331
Tests for Electric Cables under Fire Conditions
Telecom
IEC 60332
Tests on Electric and Optical Fibre Cables under Fire Conditions
2008
2000
2016
2011
2020
1987
2018
2019
1925
2009
2014
2022
2022
2017
2018
2014
1999
2021
2014
2018
2022
Item
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 43 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
Telecom
IEC 60364
Peripheral Equipment Electrical Installation of Buildings (Part 1 to 8)
Telecom
IEC 60445
Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
Telecom
IEC 60478
Stabilized power supplies, D.C. output
Telecom
IEC 60489
Methods of Measurement for Radio Equipment Used in the Mobile Services
Telecom
IEC 60529
Degrees of Protection Provided by Enclosures (IP Code)
Telecom
IEC 60754
Test on Gases Evolved During Combustion of Materials from Cables
Telecom
IEC 60793
Optical Fibres
Telecom
IEC 60794
Optical Fibre Cables (Part 1 to Part 5)
Telecom
IEC 61000
Electromagnetic Compatibility (EMC)
Telecom
IEC 61034
Measurement of Smoke Density of Cables Burning under Defined Conditions
Telecom
IEC 61146
Video Cameras (PAL/SECAM/NTSC) – Methods of Measurement – All Parts
Telecom
IEC 61156
Multicore and symmetrical pair/quad cables for digital communications
Telecom
IEC 61280
Fibre optic communication subsystem basic test procedures – All Parts
Telecom
IEC 61281-1
Fibre Optic Communication Subsystems - Part 1: Generic Specification
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
2022
2021
1974
1999
2019
2019
2022
2022
2022
2019
1998
2020
2019
2017
Telecom
IEC 61300
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures
- All Parts
2022
Telecom
IEC 61643
Low Voltage Surge Protective Devices
Telecom
IEC 61753
Fibre optic interconnecting devices and passive components –
Telecom
IEC 61754
Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces - All Parts
Telecom
IEC 61935
Specification for the testing of balanced and coaxial information technology cabling
Telecom
IEC 62005
Reliability of Fibre Optic Interconnecting Devices and Passive Components- All Parts
Telecom
IEC 62305
Protection Against Lightning
Telecom
IEC/TR 61282
Fibre optic communication system design guidelines - All Parts
Telecom
IEC/TR 62221
Optical fibres – Measurement methods – Micro bending sensitivity
Telecom
IEC/TS 62033
Attenuation Uniformity in Optical Fibres
Telecom
IEC-60304
Standard colours for insulation for low-frequency cables and wires
Telecom
IEEE 1138
Testing and performance for Optical Ground Wire (OPGW) use on electric utility power lines
2020
2018
2022
2022
2018
2022
2022
2012
2000
1982
2021
Telecom
IEEE 802 series
Collection of Networking Standards covering the Physical and Data-link Layer for Technologies such as Ethernet and Wireless
2020
Telecom
IMO ISPS Code
International Ship and Port Facility Security Code Parts A & B
Telecom
IMO SOLAS
International Convention for the Safety of Life at Sea
Telecom
ISC/IEC 14443
Cards and Security Devices for Personal Identification – Contactless Proximity Objects
Telecom
ISO 27001
Information Security Management Systems – Requirements
Telecom
ISO 9000
Quality Management Systems - Fundamentals and Vocabulary
Telecom
ISO 9001
Quality Management Systems - Requirements
Telecom
ISO 9004
Quality management - Quality of an organization - Guidance to achieve sustained success
Telecom
ISO/IEC 11801
Information technology - Generic cabling for customer premises - All Parts
Telecom
ISO/IEC 7810
Identification Cards - Physical Characteristics
Telecom
ISO/IEC 7816
Identification Cards - Integrated Circuit Cards
2021
1980
2021
2020
2015
2015
2018
2017
2019
2017
Item
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 44 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
0
Rev.
23-Aug-2024
Rev. Date
Discipline
Telecom
Telecom
Telecom
International Codes or Standards
International Code or Standard
Description
ITU
ITU-R
ITU-T
International Telecommunication Union Standards
Telecommunication Radio Communications Sector Standards
Telecommunication Standardization Sector
Telecom
ITU-T 1.430
ISDN BRI Layer 1
Telecom
ITU-T 1431
ISDN PRI Layer 1
Telecom
ITU-T G.651.1
Characteristics of a 50/125 μm multimode graded index optical fibre and cable
Telecom
ITU-T G.652
Characteristics of a single-mode optical fibre and cable
Telecom
ITU-T G.655
Characteristics of a non-zero dispersion-shifted single-mode optical fibre and cable
Telecom
ITU-T G.703
Physical/electrical characteristics of hierarchical digital interfaces
Telecom
ITU-T G.711
Pulse Code Modulation (PCM) of Voice Frequencies
Date
Remarks
1949
NA
NA
1995
2021
2019
2017
2017
2021
2011
Telecom
ITU-T G.729
Coding of Speech at 8 kbit/s using Conjugate-Structure Algebraic-Code Excited Linear Prediction (CS- ACELP)
2021
Telecom
ITU-T G.732
Characteristics of Primary PCM Multiplex Equipment Operating at 2048 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipment
Telecom
ITU-T G.973
Characteristics of repeaterless optical fibre submarine cable systems
Telecom
ITU-T H.323
Packet-Based Multimedia Communications Systems
Telecom
ITU-T I.120
Integrated Services Digital Networks (ISDNs)
Telecom
ITU-T K.111
Protection of surrounding structures of telecommunication towers against lightning
Telecom
TIA-222
Structural Standard for Antenna Supporting Structures and Antennas
Telecom
TIA-455
General requirements for standard test procedures for optical fibres, cables, transducers, sensors, connecting and terminating devices, and other fibre optic components
Telecom
TIA-516
Standard Test Procedures for Fiber Optic Systems
Telecom
TIA-526
Standard Test Procedures for Fibre Optic Systems - All Parts
Telecom
TIA-568
Commercial Building Telecommunications Cabling Standard - All Parts
Telecom
TIA-606
Administration Standard for Telecommunications Infrastructure
1993
2020
2022
1993
2016
2019
2014
2020
1992
2020
2021
Telecom
TIA-607
Infrastructure Generic Telecommunications Bonding and Grounding (Earthing) for Customer Premises
2019
Telecom
UL 813
UL Standard for Commercial Audio Equipment
Telecom
TIA-569
Telecommunications Pathways and Spaces
Telecom
TIA-598
Optical Fiber Cable Color Coding
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
ASHRAE Handbook
Fundamentals.
ASHRAE Handbook
HVAC Systems and Equipment
ASHRAE Handbook
HVAC Applications
ASHRAE 15
Safety Standard for Mechanical Refrigeration
ASHRAE 16
Method of testing for rating room A/C and Packaged terminal A/C
ASHRAE 20
Method of Testing for Rating Remote Mechanical-Draft Air-Cooled Refrigerant Condensers
ASHRAE 30
Method of testing liquid chilling packages
ASHRAE 33
Methods of Testing Forced-Circulation Air-Cooling and Air Heating Coils
ASHRAE 34
Designations and Safety Classification of Refrigerants
ASHRAE 52.2
Method of Testing General Ventilation Air-Cleaning Devices for removal Efficiency by Particle Size
ASHRAE 62.1
ASHRAE 62.1 Ventilation for Acceptable Indoor Air Quality
2013
2019
2014
2021
2020
2023
2022
2016
2019
2019
2016
2022
2017
2019
Item
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 45 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
ASHRAE 70
Method of Testing the Performance of Air Outlets and Air Inlets
ASHRAE 90.1
Energy Standard for Building
ASHRAE 111
Measurement, Testing, Adjusting and Balancing a Building HVAC Systems
(SMACNA)
SHEET METALAND AIR-CONDITIONING CONTRACTORS’ NATIONAL ASSOCIATION, INC. (SMACNA)
SMACNA 006
HVAC Duct Construction Standards – Metal and Flexible
NFPA 1
NFPA 70
Fire Code Handbook.
National Electric Code
NFPA 70E
Standard for electrical Safety in the Workplace.
NFPA 90A
Installation of Air Conditioning and Ventilating Systems
NFPA 90B
Installation of Warm Air Heating and Air-Conditioning Systems
NFPA 101
Life Safety Code
NFPA 496
Standard for Purged and Pressurized Enclosures for Electrical Equipment
DW 143
DW 144
Building Engineering Services Association (BESA) DW 143 Leakage testing of sheet metal ductwork
Building Engineering Services Association (BESA) DW 144 Specification for the fabrication of Sheet Metal Ductwork
ASME AG-1
Code on Nuclear Air and Gas Treatment
ASME B16.5
Pipe Flanges and Flanged Fittings
ASME B16.22
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings
ASME B16.25
Butt Welding Ends
ASME B73.1
Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process
ASME PTC 8.2
Centrifugal Pumps
ASME Sec VIII, Div, 1
Boiler and Pressure Vessel Code
AHRI 210/240
Performance Rating of Unitary Air-Conditioning and Air Source Heat Pump Equipment
AHRI 270
Standard for Sound Performance Rating of Outdoor Unitary Equipment
AHRI 310/380
Packaged terminal air-conditioners and heat pumps
AHRI 340/360
Performance Rating of Commercial and Industrial Unitary Air Conditioning Equipment
AHRI 365
AHRI 410
AHRI 430
Commercial and industrial unitary air-conditioning equipment
Forced Circulation Air-Cooling and Air- Heating Coils
Performance Rating of Central Station Air-Handling Unit Supply Fans
BS EN 378 (Parts 1, 2 & 3)
Refrigerating Systems and Heat Pumps – Safety and Environmental Requirements
BS EN ISO 16890 Pt 1
Air Filters for General Ventilation Part 1: Technical Specification requirements and Classification System Based upon Particulate Matter Efficiency (ePM)
2006
2019
2008
2020
2024
BS EN 1092-1
BS EN 1216
Flanges and Their Joints – Circular flanges for Pipes Valves, Fittings and Accessories, PN designated Part 1; Steel Flanges
Heat exchangers – Forced circulation air cooling and air heating coils – Test procedures for establishing the performance
BS EN 1751
Ventilation for Buildings – Air terminal Devices – Aerodynamic testing of Damper and Valves
BS EN 1886
Ventilation for Buildings – Air Handling Units – Mechanical Performance
BS 5970
Thermal Insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range of -100°C to +870°C – Code of Practice
BS EN 10346
Continuously hot dip coated steel flat products – Technical conditions
BS EN 13053
Ventilation for Buildings – Air Handling Units – Rating and Performance of Units, Components and Sections
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 46 of 54
Item
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
HVAC
I&C
BS EN 13779
Ventilation for non-residential Buildings – Performance requirements for ventilation and room conditioning systems
BS EN 14511 Parts 1-4 inc.
Air-conditioners, liquid chilling packages and heat pump with electrically driven compressor for space heating and cooling
BS EN 14276-1
Pressure equipment for refrigerating system and heat pump Part 1:Vessels - General requirements
BS EN 14276-2
Pressure equipment for refrigerating system and heat pump Part 2: Piping - General requirements
BS EN 14511 Parts 1-4
Air-Conditioners, Liquid Chilling Packages and Heat Pump with Electrically Driven Compressor for Space Heating and Cooling
BS EN 14986
Design of fans working in potentially explosive environments
BS EN 29463 (All Parts)
High Efficiency Filters and Filter Media for Removing Particles in Air
BS EN 60204 (All Parts)
Safety of Machinery
BS EN 61310 (All Parts)
Safety of machinery – Indication, marking and actuations
BS EN IEC 62485-2
Safety requirements for secondary Batteries and battery Installations.
BS EN ISO 7235
ATEX 2014/34/
Acoustics – Laboratory measurement procedure for ducted silencers and air terminal units – Insertion loss, flow noise and total pressure loss
EU Directive of the European Parliament and of the council on the harmonisation of laws of the Member States relating to equipment and protective systems intended for use in potentially explosive and protective systems intended for use in potentially explosive and protective systems intended for use
ISO 9001
ISO 9004
ISO 1940-1
ISO 817
ISO 5801
ISO 11201
ISO 11202
ISO 12100
Quality Management Systems – Requirements
Quality Management – Quality of an Organization – Guidance to Achieve Sustained Success
Mechanical Vibration Balance Quality requirements for Rotors in a Constant (Rigid) State - Part 1: Specification and Verification of Balance Tolerances
Refrigerants – Designation and Safety Classification
Industrial fans – Performance testing using standardized airways
Acoustics – Noise emitted by machinery and equipment –Measurement of emission sound pressure levels at a workstation and at other specified positions
Acoustics – Noise emitted by machinery and equipment –Determination of emission sound pressure levels at a workstation and at other specified positions applying approximate environmental corrections
Safety of Machinery – General Principles for Design – Risk assessment and risk reduction
ISO 12499
Industrial Fans – Mechanical Safety of Fans - Guarding
ISO 14694
Industrial Fans – Specifications for balance quality and vibration levels
ISO 15138
ISO 21940-11
Petroleum and Natural Gas Industries – Offshore Production Installations – Heating Ventilation and Air- Conditioning
Mechanical Vibration- Rotor Balancing – Part 11: Procedures and Tolerances for Rotors with Rigid Behaviour
ISO 16890
Air Filters for General Ventilation
ISA S71.04
Environmental Conditions for Process Measurement and Control Systems – Airborne Contaminants
IEC 60079 (All parts)
Electrical Apparatus for Explosive Gas Atmospheres
IEC 60529
Degrees of Protection Provided by Enclosures (IP Code)
2019
IEC 60654-1
IEC 60654-4
Industrial-process measurement and control equipment; operating conditions, Part 1: Climatic Conditions
Industrial-process measurement and control equipment; operating conditions, Part 4: Corrosive and erosive influences
IEC 62402
Obsolescence Management
NEBB
CIBSE
L8
Associated Air Balance Council (AABC) – National Standards, Total System Balance 7th Edition
National Environmental Balancing Bureau (NEBB) – Procedural Standards for TAB (Testing, Adjusting & Balancing) Environmental Systems
CIBSE Commissioning Codes
UK HSE Approved Code of Practice and Guidance L8 – The Control of Legionella bacteria in water systems
PED 2014/68/EU
European Union Pressure Equipment Directive
NAMUR NE 165
BPCS Protection Layers
2019
Item
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 47 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
International Codes or Standards
Discipline
International Code or Standard
Description
0
Rev.
23-Aug-2024
Rev. Date
Date
Remarks
I&C
I&C
I&C
Marine
Marine
Marine
Marine
Marine
Piping
IEC 62682
Management of Alarm Systems for the Process Industries
ISA 106
Procedure Automation for Continuous Process Operation
IEC 80079-36
Non-electrical equipment for explosive atmospheres - Basic method and requirements
BS6349-7
Guide to the design and construction of breakwaters.
CIRIA
CEM
EurOtop
IPCC
The Rock Manual. The Use of Rock in Hydraulic Engineering
Coastal Engineering Manual (CEM), U.S. Army Corps of Engineers
Manual on wave overtopping of sea defences and related structures.
Climate Change 2023: Synthesis Report.
2016
2013
2019
1991
2007
2006
2018
2023
ISO TS 10465-1
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP- UP) — Part 1: Installation procedures
2007
Item
1629
1630
1631
1632
1633
1634
1635
1636
1637
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 48 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
TRANSCO Specification (Note 5)
Item
Discipline
TRANSCO Specification (NOTE 9)
Revision
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
General
DWG TR GEN 01 01
TRANSCO Standard Drawing - Sign 1
General
DWG TR GEN 01 02
TRANSCO Standard Drawing - Sign 2
General
DWG TR GEN 01 03
TRANSCO Standard Drawing - Sign 3
General
DWG TR GEN 01 04
TRANSCO Standard Drawing - SIGN – 4 (LIMIT WORKING AREA)
General
DWG TR GEN 01 05
TRANSCO Standard Drawing - SIGN – 5 (WEAR HELMET)
General
DWG TR GEN 01 06
TRANSCO Standard Drawing - SIGN – 6 (PROTECTIVE FOOTWEAR)
General
DWG TR GEN 01 07
TRANSCO Standard Drawing - SIGN – 7 (NO ADMITTANCE)
General
DWG TR GEN 01 08
TRANSCO Standard Drawing - SIGN – 8 (NO SMOKING)
General
DWG TR GEN 01 09
TRANSCO Standard Drawing - SIGN – 9 (FIRST AID)
General
DWG TR GEN 01 10
TRANSCO Standard Drawing - SIGN – 10 (FIRE ACTION)
General
DWG TR GEN 01 11
TRANSCO Standard Drawing - SIGN – 11 (WEAR EAR PROTECTION)
General
DWG TR GEN 01 12
TRANSCO Standard Drawing - SIGN – 12 (KEEP LOCKED)
General
DWG TR GEN 01 13
TRANSCO Standard Drawing - SIGN – 13 (WEAR GLOVES)
General
DWG TR GEN 01 14
TRANSCO Standard Drawing - SIGN – 14 (NO NAKED FLAMES)
General
DWG TR GEN 01 15
TRANSCO Standard Drawing - SIGN – 15 (DO NOT TOUCH)
General
DWG TR GEN 01 16
TRANSCO Standard Drawing - SIGN – 16 (BATTERY ROOM)
General
DWG TR GEN 01 17
TRANSCO Standard Drawing - SIGN – 17 (CO2 WARNING)
General
DWG TR GEN 01 18
TRANSCO Standard Drawing - SIGN – 18 (CO2)
General
DWG TR GEN 01 19
TRANSCO Standard Drawing - SIGN – 19 (FF DRY POWDER-01)
General
DWG TR GEN 01 20
TRANSCO Standard Drawing - SIGN – 20 (FF DRY POWDER)
General
DWG TR GEN 01 01
TRANSCO Standard Drawing - Typical Oil Separator
General
DWG TR GEN 02 01
TRANSCO Standard Drawing - Diagram illustrating principles of naming of switches
General
S-TR-GEN-CDF
General
S-TR-GEN-EDF
General
S-TR-GEN-GDF
General
S-TR-GEN-ID
General
S-TR-GEN-PSTS
General
S-TR-GEN-SFL
General
General
S-TR-GEN-SQA
S-TR-GEN-SQA
General
S-TR-GEN-STC
General
OP-AM-AI-0018
HV Switchgear
S-SWG-HV-BUSH
HV Switchgear
S-SWG-HV-GEN
HV Switchgear
S-SWG-HV-SA
HV Switchgear
S-SWG-HV-VTCT
HV Switchgear
S-TR-SWG-HV-GIS
Transformers / Reactors
S-TR-TRAFO-ATR-O- Type1
0
0
0
3
0
0
4
0
0
0
0
0
1
0
2
Civil Design Fundamental
El Design Fundamental
Gen Conditions
Component Marking
Planning & Scheduling TechSpec
System Characteristics
Safety & Quality
ANNEX-01-1 - list of drawings
Spec Tech Requ’s
Water Transmission Tagging Methodology.pdf
HIGH VOLTAGE OUTDOOR BUSHING
GENERAL REQUIREMENTS
HIGH VOLTAGE SURGE ARRESTERS
VOLTAGE AND CURRENT TRANSFORMERS
HIGH VOLTAGE GAS INSULATED SWITCHGEAR
AUXILIARY / DISTRIBUTION TRANSFORMERS
0
Rev.
23-Aug-2024
Rev. Date
Date
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2002
2019
2012
2010
2009
2009
2013
2009
2009
2021
2017
2009
2021
2009
2009
2022
2009
Remarks
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 49 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
TRANSCO Specification (Note 5)
Item
Discipline
TRANSCO Specification (NOTE 9)
Revision
Description
Transformers / Reactors S-TR-TRAFO-BTR
Transformers / Reactors S-TR-TRAFO-ETR
Transformers / Reactors
S-TR-TRAFO-ETR- WSW_SPC
Transformers / Reactors S-TR-TRAFO-FDR-A
Transformers / Reactors S-TR-TRAFO-FR-G
Transformers / Reactors S-TR-TRAFO-GEN
Transformers / Reactors S-TR-TRAFO-NER
Transformers / Reactors S-TR-TRAFO-PHTR
Transformers / Reactors S-TR-TRAFO-PTR
Transformers / Reactors S-TR-TRAFO-RES
Transformers / Reactors S-TR-TRAFO-SHR
OHTL
OHTL
OHTL
OHTL
OHTL
OHTL
OHTL
OHTL
S-TR-OHL-AIR
S-TR-OHL-CON
S-TR-OHL-GEN
S-TR-OHL-HW
S-TR-OHL-INS
S-TR-OHL-OPGW
S-TR-OHL-SURV
S-TR-OHL-TOWER
Cables & Accessories
S-TR-CAB-GEN
Cables & Accessories
S-CAB-INST-132
1
1
1
1
0
2
0
2
0
0
2
0
0
0
0
0
0
0
0
0
0
BOOSTER TRANSFORMERS
EARTHING TRANSFORMERS
EARTHING TRANSFORMER SPECIAL SIZE WITH SECONDARY WINDING
FILTER AND DAMPING REACTORS
FILTER REACTORS
GENERAL REQUIREMENTS
NEUTRAL EARTHING REACTORS
PHASE-SHIFTING TRANSFORMERS
POWER TRANSFORMERS
EARTHING RESISTORS
SHUNT REACTORS
AIRCRAFT WARNING SYSTEMS
CONDUCTORS / EARTHWIRES
GENERAL REQUIREMENTS
HARDWARE AND FITTINGS
INSULATORS
OPTICAL GROUND WIRES
SURVEYING WORKS
HV TOWERS OF LATTICE STEEL DESIGN
GENERAL REQUIREMENTS (HOLD 1)
0
Rev.
23-Aug-2024
Rev. Date
Date
2009
2009
2009
2009
2009
2009
2009
2009
2021
2009
2009
2014
2009
2009
2018
2018
2018
2018
2011
2018
Remarks
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
HOLD 1
Cables & Accessories
S-CAB-INST-220-400-TROU0
INSTALLATION REQUIREMENTS FOR 220KV & 400KV UNDERGROUND POWER CABLES
2019
Not Applicable
INSTALLATION REQUIREMENTS FOR 132KV UNDERGROUND POWER CABLES (HOLD 1)
2019
HOLD 1
Cables & Accessories
S-CAB-INST-400-220-132-O1
INSTALLATION REQUIREMENTS FOR 400/220/132KV UNDERGROUND POWER CABLES (HOLD 1)
2009
Cables & Accessories
S-CAB-INST-CONT-FOC
0
INSTALLATION REQUIREMENTS FOR FIBRE OPTIC CABLES (HOLD 1)
Cables & Accessories
S-TR-CAB-INST-CONT-FOC0
INSTALLATION REQUIREMENTS FOR CONTROL &FIBRE OPTIC CABLES (HOLD 1)
Cables & Accessories
S-CAB-132-PEST7-I
Cables & Accessories
S-CAB-132-PEST7-S
Cables & Accessories
S-CAB-132-PVC-I
Cables & Accessories
S-CAB-132-PVC-S
Cables & Accessories
S-CAB-220-PEST7-S&I
Cables & Accessories
S-CAB-220-PVC-I
0
0
0
0
0
0
Cables & Accessories
S-CAB-400-220-132-LSZH-S0
Cables & Accessories
S-CAB-400-PEST7
Cables & Accessories
S-CAB-400-PVC-S&I
Cables & Accessories
S-CAB-400-PVC-S&I-LS
0
0
0
132 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PE ST7 OUTER SHEATH (SUPPLY AND INSTALLATION) (HOLD 1)
132 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PEST7 OUTER SHEATH (SUPPLY) (HOLD 1)
132 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PVC OUTER SHEATH (SUPPLY AND INSTALLATION) (HOLD 1)
2009
132 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PVC OUTER SHEATH (SUPPLY) (HOLD 1)
2009
220 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND POWER CABLES WITH PVC OUTER SHEATH (SUPPLY AND INSTALLATION)
2009
400/220/132 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH LSZH OUTER SHEATH (SUPPLY AND INSTALLATION IN OPEN-CUT CULVERTS/PIPE-JACKET MICRO- TUNNELS) (HOLD 1)
400 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PEST7 OUTER SHEATH (SUPPLY AND INSTALLATION)
2009
2009
400 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PVC OUTER SHEATH (SUPPLY AND INSTALLATION)
2009
400 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PVC OUTER SHEATH (SUPPLY AND INSTALLATION)
2009
2016
2009
2009
2009
220 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PEST7 OUTER SHEATH (SUPPLY AND INSTALLATION)
2009
Not Applicable
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
Not Applicable
HOLD 1
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Cables & Accessories
S-CAB-400-PVC-S&I-Tunne 0
400 KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES WITH PVC OUTER SHEATH (SUPPLY AND INSTALLATION IN TUNNELS)
2009
Cables & Accessories
S-TR-CAB-COAX
Cables & Accessories
S-TR-CAB-CONT
0
0
COAXIAL CABLES
CONTROL/SIGNAL CABLES (HOLD 1)
2009
2009
HOLD 1
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 50 of 54
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
TRANSCO Specification (Note 5)
Item
Discipline
TRANSCO Specification (NOTE 9)
Revision
Description
Cables & Accessories
S-TR-CAB-FOC
Cables & Accessories
S-TR-CAB-LV-MC-S&I
Cables & Accessories
S-TR-CAB-LV-SC-S&I
Cables & Accessories
S-TR-CAB-MV-3C-S&I
Cables & Accessories
S-TR-CAB-MV-SC-S&I
Cables & Accessories
S-TR-CAB-PROT-TEL
Cables & Accessories
S-CAB-ACC-132
Cables & Accessories
S-CAB-ACC-220
Cables & Accessories
S-CAB-ACC-400
0
0
0
0
0
0
0
0
0
Cables & Accessories
S-TR-CAB-ACC-DTS
Cables & Accessories
S-TR-CAB-ACC-DTS
Cables & Accessories
S-TR-CAB-ACC-FOC
Cables & Accessories
S-TR-CAB-ACC-LV-I
Cables & Accessories
S-TR-CAB-ACC-MV-I
Cables & Accessories
S-TR-CAB-ACC-PROT- TEL
0
1
0
0
0
0
FIBRE OPTIC UNDERGROUND CABLES (HOLD 1)
LV XLPE-INSULATED MULTI-CORE UNDERGROUND CABLES (SUPPLY AND INSTALLATION)
2009
Not Applicable
LV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES (SUPPLY AND INSTALLATION)
2009
Not Applicable
11KV, 22KV OR 33KV XLPE-INSULATED THREE-CORE UNDERGROUND CABLES (SUPPLY AND INSTALLATION)
2009
11KV, 22KV OR 33KV XLPE-INSULATED SINGLE-CORE UNDERGROUND CABLES (SUPPLY AND INSTALLATION)
17 PAIRS PROTECTION/TELEPHONE UNDERGROUND CABLES
132 KV XLPE-INSULATED UNDERGROUND CABLE ACCESSORIES (HOLD 1)
220 KV XLPE-INSULATED UNDERGROUND CABLE ACCESSORIES
400 KV XLPE-INSULATED UNDERGROUND CABLE ACCESSORIES
DISTRIBUTED TEMPERATURE SENSOR (DTS) SYSTEM ON UNDERGROUND POWER CABLE CIRCUITS
DISTRIBUTED TEMPERATURE SENSOR (DTS) SYSTEM ON UNDERGROUND POWER CABLE CIRCUITS
FIBER OPTIC CABLE ACCESSORIES
LV XLPE-INSULATED UNDERGROUND CABLE ACCESSORIES (SUPPLY AND INSTALLATION)
2009
Not Applicable
11 KV, 22 KV OR 33 KV XLPE-INSULATED UNDERGROUND CABLE ACCESSORIES (SUPPLY AND INSTALLATION)
17 PAIRS PROTECTION/TELEPHONE UNDERGROUND CABLE ACCESSORIES
Cables & Accessories
S-TR-CAB-ACC-CLEAT-UG 0
CABLE CLEATS FOR UNDERGROUND CABLES (HOLD 1)
Cables & Accessories
S-CAB-MAR-INST-132-3C 0
INSTALLATION REQUIREMENTS FOR 132KV THREE-CORE SUBMARINE CABLES
Cables & Accessories
S-CAB-MAR-INST-132-SC 0
INSTALLATION REQUIREMENTS FOR 132 KV SINGLE-CORE SUBMARINE CABLES
Cables & Accessories
S-TR-CAB-MAR-INST-FOC- PROT-TEL
0
INSTALLATION REQUIREMENTS FOR FIBRE OPTIC AND PROTECTION/TELEPHONE SUBMARINE CABLES
Cables & Accessories
S-CAB-MAR-132-XLPE-3C- 0
132 KV XLPE-INSULATED THREE-CORE SUBMARINE CABLES (DRY TYPE)
Cables & Accessories
S-CAB-MAR-132-XLPE-3C- WET
0
132 KV XLPE-INSULATED THREE-CORE SUBMARINE CABLES (WET TYPE)
Cables & Accessories
S-CAB-MAR-132-XLPE-SC 0
132 KV XLPE-INSULATED SINGLE-CORE SUBMARINE CABLES
Cables & Accessories
S-TR-CAB-MAR-FOC
Cables & Accessories
S-TR-CAB-MAR-PROT- TEL
0
0
FIBRE OPTIC SUBMARINE CABLES
17 PAIRS PROTECTION/TELEPHONE SUBMARINE CABLES
Cables & Accessories
S-CAB-MAR-ACC-132-XLPE2
132 KV XLPE-INSULATED SUBMARINE CABLE ACCESSORIES
Cables & Accessories
S-TR-CAB-MAR-ACC- CLEAT
0
CABLE CLEATS FOR SUBMARINE CABLES
Cables & Accessories
S-TR-CAB-MAR-ACC-FOC 0
FIBRE OPTIC SUBMARINE CABLE ACCESSORIES
Cables & Accessories
S-TR-CAB-MAR-ACC-PROT0
17 PAIRS PROTECTION/TELEPHONE SUBMARINE CABLE ACCESSORIES
Power Compensation
S-TR-DRPC
0
DYNAMIC REACTIVE POWER COMPENSATION
Power Compensation
S-POC-SVC-CONT-PROT 0
CONTROL, SUPERVISION AND PROTECTION
Power Compensation
S-POC-SVC-COOL
Power Compensation
S-POC-SVC-GEN
Power Compensation
S-POC-SVC-LOSS
Power Compensation
S-POC-SVC-MVD
Power Compensation
S-POC-SVC-STUDY
Power Compensation
S-POC-SVC-THYR
Power Compensation
S-TR-POC-GEN
0
0
0
0
0
0
0
COOLING SYSTEM FOR SVC
GENERAL REQUIREMENTS FOR SVC’S
CAPITALISATION OF SVC LOSSES
MVBUS DUCTS FOR SVC
DESIGN STUDIES
THYRISTOR VALVES
GENERAL REQUIREMENTS
LV & SS AUX
S-TR-AUX-110&48V-DC-BO0
110V&48V DC DISTRIBUTION BOARDS
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 51 of 54
0
Rev.
23-Aug-2024
Rev. Date
Date
2009
Remarks
HOLD 1
Not Applicable
Not Applicable
Not Applicable
HOLD 1
Not Applicable
Not Applicable
HOLD 1
2009
2009
2019
2019
2019
2018
2014
2019
2019
2009
2009
2018
2009
2016
2009
2009
2009
2016
2009
2009
2009
2009
2009
2020
2009
2009
2009
2009
2009
2009
2009
2009
2009
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
TRANSCO Specification (Note 5)
Item
Discipline
TRANSCO Specification (NOTE 9)
Revision
Description
LV & SS AUX
S-TR-AUX-BAT&CH-LEAD- 0
48V BATTERIES (LEAD ACID) AND CHARGERS, DUAL CONFIGURATION
LV & SS AUX
S-TR-AUX-BAT&CH-LEAD- 0
48V BATTERY (LEAD ACID) AND ONE OR DUAL CHARGER CONFIGURATIONS
LV & SS AUX
S-TR-AUX-BAT&CH-LEAD-40
110V BATTERIES (LEAD ACID) AND CHARGERS, DUAL CONFIGURATION
LV & SS AUX
S-TR-AUX-BAT&CH-LEAD-40
110V BATTERY (LEAD ACID) AND TWO CHARGERS CONFIGURATION
LV & SS AUX
S-TR-AUX-BAT&CH-NiCad- 0
48V BATTERIES (NiCad) AND CHARGERS, DUAL CONFIGURATION
LV & SS AUX
S-TR-AUX-BAT&CH-NiCad- 0
48V BATTERY (NiCad) AND ONE OD DUAL CHARGER CONFIGURATIONS
LV & SS AUX
S-TR-AUX-BAT&CH-NiCad- 0
110V BATTERIES (NiCad) AND CHARGERS, DUAL CONFIGURATION
LV & SS AUX
S-TR-AUX-BAT&CH-NiCad- 0
110V BATTERY (NiCad) AND TWO CHARGER CONFIGURATION
LV & SS AUX
S-TR-AUX-EMG
LV & SS AUX
S-TR-AUX-GEN
0
0
EMERGENCY STAND-BY DIESEL GENERATOR UNIT
GENERAL REQUIREMENTS
LV & SS AUX
S-TR-AUX-LV-AC-BOARD 0
STATION LV AC DISTRIBUTION BOARDS
LV & SS AUX
S-TR-AUX-UPS
LV & SS AUX
S-TR-STRL
LV & SS AUX
S-TR-STRL-CUB
Control Protection Superv S-TR-CPS-FMS
Control Protection Superv S-TR-CPS-GEN
Control Protection Superv S-TR-CPS-HV-PROT
Control Protection Superv S-TR-CPS-PSMS
Control Protection Superv S-TR-CPS-SCMS
Control Protection Superv S-TR-CUB
Control Protection Supervision
Control Protection Supervision
Metering
S-TR-MET-AI
Metering
S-TR-MET-CAL-BENCH
Metering
S-TR-MET-CAL-PORT
Metering
S-TR-MET-DI
Metering
S-TR-MET-EMM-1P
Metering
S-TR-MET-EMM-3PCT
Metering
S-TR-MET-EMM-3PWC
Metering
S-TR-MET-GEN
Metering
S-TR-MET-PREPAID-KP
Metering
S-TR-MET-PREPAID-SC
0
0
0
0
0
0
0
0
0
1,1
1,1
0
0
0
0
0
0
0
0
0
0
UNINTERRUPTIBLE POWER SUPPLY
STREET LIGHTING POLES INCLUDING ACCESSORIES
STREET LIGHTING CONTROL CUBICLES
FAULT MONITORING SYSTEM (FMS) (HOLD 1)
GENERAL REQUIREMENTS (HOLD 1)
(E)HV SUBSTATION PROTECTION SCHEMES (HOLD 1)
POWER SYSTEM MONITORING SCHEME (PSMS) (HOLD 1)
SUBSTATION CONTROL & MONITORING SYSTEM (SCMS) (HOLD 1)
CUBICLES,MARSHALLING BOXES &ENCLOSURES FOR CONTROL, PROTECTION, COMMUNICATION &AUXILIARY EQUIPMENT (HOLD 1)
TRANSCO_Consolidated_Cyber_Standard_Specifications (HOLD 1)
TRANSCO_Cyber_Standard_Specifications_Master_SCADA (HOLD 1)
ANALOGUE INDICATING INSTRUMENTS (HOLD 1)
STATIONARY CALIBRATION BENCH FOR METER
PORTABLE ACCURACY CHECK SET FOR METER
DIGITAL INDICATING INSTRUMENTS (HOLD 1)
SINGLE-PHASE LV OPERATED ELECTRO-MECHANICAL ENERGY METERS (HOLD 1)
THREE-PHASE LV CT OPERATED ELECTRO-MECHANICAL ENERGY METERS (HOLD 1)
THREE-PHASE LVWHOLE CURRENT OPERATED ELECTRO-MECHANICAL ENERGY METERS (HOLD 1)
2009
GENERAL REQUIREMENTS (HOLD 1)
PREPAYMENT ENERGY METERING SYSTEM (KEY-PAD)
PREPAYMENT ENERGY METERING SYSTEM (SMART-CARD)
Metering
S-TR-MET-STEM-CT-1P-1 0
ONE-PHASE CT OPERATED STATIC ENERGY METERS CLASS 1 (HOLD 1)
Metering
S-TR-MET-STEM-CT-3P-0.20
THREE-PHASE CT OPERATED STATIC ENERGY METERS CLASS 0.2S (HOLD 1)
Metering
S-TR-MET-STEM-CT-3P-0.50
THREE-PHASE CT OPERATED STATIC ENERGY METERS CLASS 0.5S (HOLD 1)
Metering
S-TR-MET-STEM-CT-3P-1 0
Three-Phase CT Operated Static Energy Meters Class 1 (HOLD 1)
Metering
S-TR-MET-STEM-DC-1P-1 0
Single-Phase Direct Connected Static Energy Meters Class 1 (HOLD 1)
Metering
S-TR-MET-STEM-DC-3P-1 0
Three-Phase Direct Connected Static Energy Meters Class 1 (HOLD 1)
0
Rev.
23-Aug-2024
Rev. Date
Date
2009
2009
2009
2009
2012
2009
2009
2009
2012
2009
2009
2009
2009
2009
2009
2009
2020
2009
2011
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
2009
Remarks
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
Not Applicable
Not Applicable
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
Not Applicable
Not Applicable
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
HOLD 1
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 52 of 54
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
SYNCHRONOUS DIGITAL HIERARCHY (SDH) OPTICAL LINE TERMINAL EQUIPMENT (STM-1/16
- OPTICAL AMPLIFIER + OPTIC HEAD)
2018
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
TRANSCO Specification (Note 5)
Item
Discipline
TRANSCO Specification (NOTE 9)
Revision
Description
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
Metering
S-TR-MET-TRAD
Metering
S-TR-MET-VTCT
Communication
S-TR COM-DPLC
Communication
S-TR-COM-AF-MUX
Communication
S-TR-COM-ALM
Communication
S-TR-COM-CCTV
Communication
S-TR-COM-GEN
Communication
S-TR-COM-LMS
Communication
S-TR-COM-OPT-SDH
Communication
S-TR-COM-PCM
Communication
S-TR-COM-PSE
Communication
S-TR-COM-RTU
Communication
S-TR-COM-TELE
Earthing / Corrosion
S-TR-CORR
Earthing / Corrosion
S-TR-EARTH-GROUND
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
ELECTRIC MEASURING TRANSDUCERS (HOLD 1)
VOLTAGE AND CURRENT TRANSFORMERS FOR ENERGY METERS
DIGITAL POWER LINE CARRIER (HOLD 1)
AUDIO FREQUENCY MULTIPLEX EQUIPMENT (AF-MUX) (HOLD 1)
ALARM EQUIPMENT / SYSTEMS (HOLD 1)
CLOSED CIRCUIT TELEVISION (CCTV)
GENERAL REQUIREMENTS
LOAD MANAGEMENT SYSTEMS (LMS)
PULSE CODE MODULATION MULTIPLEX OPTICAL EQUIPMENT
PROTECTION SIGNALLING EQUIPMENT (PSE)
REMOTE TERMINAL UNIT (RTU)
TELEPHONE EQUIPMENT / SYSTEMS
CORROSION PROTECTION
EARTHING/GROUNDING SYSTEMS (HOLD 1)
Earthing / Corrosion
S-TR-EARTH-LIGHTNING-G0
GENERAL REQUIREMENTS (HOLD 1)
Earthing / Corrosion
S-TR-LIGHTNING
Firefighting
S-TR-FIF
Electro-Mechanical Servic S-TR-ELMS-CRANE
Electro-Mechanical Servic S-TR-ELMS-GEN
0
0
1
0
LIGHTNING PROTECTION SYSTEM (HOLD 1)
FIRE PROTECTION SYSTEM
GANTRY CRANE
GENERAL REQUIREMENTS
Electro-Mechanical Servic S-TR-ELMS-HVAC+VENT 0
AIR-CONDITIONING AND VENTILATION SYSTEMS
Electro-Mechanical Servic S-TR-ELMS-LIFT
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
Civil
S-TR-CIVIL-BUILD
S-TR-CIVIL-CAB
S-TR-CIVIL-CONCRETE
S-TR-CIVIL-DRAIN
S-TR-CIVIL-FENCE
S-TR-CIVIL-FINISH
S-TR-CIVIL-GEN
S-TR-CIVIL-LIGHT
S-TR-CIVIL-MAS
S-TR-CIVIL-METAL
S-TR-CIVIL-OHL
S-TR-CIVIL-ROAD
S-TR-CIVIL-SAN
S-TR-CIVIL-SITE
S-TR-CIVIL-SOIL
S-TR-CIVIL-STEEL
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
LIFTS (ELEVATORS)
SUBSTATION AND BUILDINGS
CIVIL WORKS FOR UNDERGROUND CABLES
CONCRETE AND REINFORCED CONCRETE
DRAINAGE WORK
SECURITY FENCING
FINISHING SCHEDULE
GENERAL REQUIREMENTS
LIGHTING AND OTHER ELECTRICAL INSTALLATIONS IN ELECTRICAL ROOMS
MASONRY
METAL WORK
CIVIL WORKS FOR OVERHEAD TRANSMISSION/ DISTRIBUTION LINES
ROADS AND PAVEMENTS
PLUMBING AND SANITARY INSTALLATION
SITE INSTALLATION
SOIL INVESTIGATION
STRUCTURAL STEEL WORK
0
Rev.
23-Aug-2024
Rev. Date
Date
2009
2009
2009
2009
2009
2009
2009
2009
Remarks
HOLD 1
HOLD 1
HOLD 1
HOLD 1
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
HOLD 1
HOLD 1
HOLD 1
2018
2018
2009
2009
2021
2009
2009
2009
2018
2009
2008
2020
2009
2018
2019
2018
2018
2009
2019
2009
2021
2009
2019
2018
2018
2020
2014
2014
2009
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 53 of 54
Project Title:
Document no.:
RLNG-000-PM-PP-2000
Contractor document n°:
215122C-000-PP-2000
Contractor/Supplier:
RUWAIS LNG Project
APPLICABLE CODES AND STANDARDS
TRANSCO Specification (Note 5)
Item
191
192
Discipline
TRANSCO Specification (NOTE 9)
Revision
Description
Civil
Civil
S-TR-CIVIL-SURF
S-TR-CIVIL-WORK
0
0
SURFACE PROTECTION
CIVIL CONSTRUCTION WORKS
0
Rev.
23-Aug-2024
Rev. Date
Remarks
Date
2009
2015
HOLD 1:
Applicablity of the TRANSCO code for the project to be confirmed
THE TERMS OF CONTRACT / AGREEMENT NO: CON22-146 SHALL APPLY FOR ANY DISCLOSURE OF THIS DOCUMENT TO ANY THIRD PARTY.
Page 54 of 54
Project: Q-32859 - NMDC - Ruwais Folder: RFQ Files