4439-KK-SG-000000002

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

CT-EPC/017/SH/EPM/RPC-X/2023

TCM IDENTIFICATION CODE

SHEET 1 / 27

ISSUE 2

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

14/Oct/2024

IFF - Issued for Final

S. Gode

P. Gaikwad

E. Magadeev

22/Aug/2024

IOC - Implementation of Comments

S. Gode

P. Gaikwad

E. Magadeev

10/Jul/2024

IFA - Issued for Approval

S. Gode

P. Gaikwad

E. Magadeev

Issue

Date

Reason for Issue – Revision Description

Prepared

Checked

Approved

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent.

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 2 / 27

ISSUE 2

CONTENTS

1 PURPOSE … 3

1.1 PROJECT DESCRIPTION … 3 1.2 DEFINITIONS … 8

2 REFERENCE DOCUMENTS … 9

3 SYMBOLS … 9

3.1 3.2 3.3

LEGEND AND SYMBOLS FOR INSTRUMENT LAYOUT … 9 LEGEND AND SYMBOLS FOR FIRE & GAS LAYOUT … 10 LEGEND AND SYMBOLS FOR TELECOM LAYOUT … 11

INSTRUMENT NUMBERING … 12

4.1 LAB COMPLEX … 12 4.2 RA1K … 18

5 LOOP NUMBERING … 19

6 REFERENCE DRAWING FOR LAYOUT … 19

7 TAG NUMBER FOR JUNCTION BOX/FIELD PANELS (INSTRUMENT, F&G, TELECOM) … 19

INSTRUMENT CABLE NUMBERING … 21

8.1 CABLE FROM INSTRUMENT TO JB (BRANCH CABLE)/DIRECT RUN CABLE … 21 8.2 MULTI CABLE NUMBERING … 22

9 TELECOM CABLE NUMBERING: … 23

9.1 MULTICORE CABLE NUMBER… 23 9.2 CABLE FROM TELECOM DEVICE TO JB (BRANCH CABLE)/ DIRECT RUN CABLE … 23

AIR DISTRIBUTION MANIFOLD NUMBERING PHILOSOPHY … 24

INSTRUMENT CABINET … 24

12 MOTOR SIGNALS NUMBERING … 27

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 3 / 27

ISSUE 2

PURPOSE

This document addresses the technical requirement for the instrumentation equipment numbering intended for the facilities to be installed for the EPC phase of the project “REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <>”. The document describes the requirement to uniquely identify plant items to enable effective design development, operation, inspection, maintenance, and management of the facilities throughout the project life cycle. Contractors, subcontractors, and package vendors shall comply with the tagging rules laid out in this document. Proprietary equipment vendors shall not use their own tagging since cross referencing with the project tag numbering system will lead to confusion.

1.1 Project Description

In order to fulfil its domestic needs in Linear-Alkyl-Benzene (LAB) used for the production of detergents and possibly export the excess to the international market, Sonatrach plans to build a new LAB production complex in Skikda (Algeria). The new complex will produce 100,000 tons of LAB per year and will be installed in the existing industrial zone of Skikda. Skikda is a coastal town located 350 km east of Algeri, Algeria.

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 4 / 27

ISSUE 2

Figure 1 – Satellite view of plant location

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 5 / 27

ISSUE 2

Figure 2 – Satellite view Skikda industrial area

The LAB project includes the following installations located on four different sites:

• New LAB complex (DEV1 area):

The new LAB complex will include the following three process units for the production of N- Paraffins: ✓ ✓ ✓

(U-100) Prefractionation of Kerosene feedstock, (U-200) Kerosene Hydrotreating to remove sulfur, nitrogen and aromatics contaminants, (U-300) Molex unit to extract N-paraffins through adsorption.

LAB is then produced from N-Paraffins in the following four units: ✓ ✓ ✓ ✓

(U-400) Pacol unit carrying out the dehydrogenation of n-paraffins to n-olefins, (U-500) Define unit carrying out the selective hydrogenation of di-olefins to n-olefins, (U-600) PEP unit removing the aromatics from the Pacol outlet stream, (U-700) Detal-Plus unit making alkylation of benzene with linear olefins to produce linear- alkyl-benzene LAB and separating the HAB by-product.

Utilities units consists of the following:

✓ U 805 – Power Plant ✓ U 810 - Natural Gas and Fuel Gas ✓ U 820 – Plant and Instrument Air ✓ U 830 - Nitrogen

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 6 / 27

ISSUE 2

✓ U 835 – Hydrogen Production Unit ✓ U 840 – Industrial Water ✓ U 850 – Demineralized Water system ✓ U 860 – BFW, steam and condensate ✓ U 870 – Cooling Water system ✓ U 880 – Potable Water system ✓ U 890 – Hot Oil system.

Offsites units consists of the following:

✓ U 910 – Feedstock Kerosene and Benzene storage ✓ U 920 – Intermediate and recycled products storage ✓ U 930 – Final product storage ✓ U 940 – Chemical storage facilities ✓ U 950 – Flare system ✓ U 960 – Closed Drainage system ✓ U 965 – Sour Water treatment system ✓ U 970 – Waste Water system ✓ U 980 – Fire Water system

✓ Figure 3 – Identification of main units of DEV1 area (from FEED)

• Skikda refinery RA1K:

The project will include all the necessary facilities:

✓ To export from the RA1K refinery, Kerosene and Benzene to the new LAB complex ✓ To receive the by-products generated by the LAB complex

• Skikda industrial area (DRIK):

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 7 / 27

ISSUE 2

The project will cover the interconnecting lines for raw materials, by-products, finished LAB product to the port and utilities.

• Port of Skikda:

The project will include all the facilities necessary to load finished LAB product on ships.

Project references:

Client Project Location Official name of each site

SONATRACH LAB – EPC phase Skikda, Algeria LAB Complex (Zone DEV1) RA1K Refinery DRIK (Direction Régionale Industrielle de Skikda) Port (Zone Portuaire)

Figure 4 - Layout of Skikda industrial area showing sites

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 8 / 27

ISSUE 2

Figure 5 - DEV1 area reserved for erection of LAB complex

1.2 Definitions

CA / COMPANY / Maitre de l’Ouvrage SONATRACH DC-EPM

CONTRACTOR / Entrepreneur

TECNIMONT SPA

TECHNOLOGY LICENSOR

HONEYWELL UOP

PROJECT

REALISATION

EPC D’INSTALLATIONS DE

PRODUCTION DE LINEAR-ALKYL-BENZENE <> A

SKIKDA ALGERIE

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 9 / 27

ISSUE 2

REFERENCE DOCUMENTS

The present specification has been developed taking into consideration requirements specified in following documents. TCM / CONTRACTOR DOCUMENT NO. 4439-YZ-PC-000000111

DOCUMENT TITLE TAG NUMBERING PROCEDURE

SYMBOLS

3.1 Legend And Symbols for Instrument Layout

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 10 / 27

ISSUE 2

3.2 Legend And Symbols for Fire & Gas Layout

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 11 / 27

ISSUE 2

3.3 Legend And Symbols for Telecom Layout

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 12 / 27

ISSUE 2

INSTRUMENT NUMBERING

4.1 LAB Complex

4.1.1 Instrument Numbering

The instruments will be tagged as follows:

Basic format:

AAA-BBBBB-CCCDD

where:

• AAA: Unit/Section number, which the instrument belongs to (3 digits, in accordance with the unit tables of UNIT NUMBERING. identification has more than 3 digits, only the first 3 digits are used for this purpose: e.g. PORT shall be POR). Refer Table 1, Table 2, Table 3 & Table 4 below. For F&G and Telecom devices inside buildings “AAA” will be 151 for PBs, 152 for SPBs, 153 for NPBs. For PBs (Process Building), SPBs (Services to Process Building) and NPBs (Non Process Building) refer Table 6 below.

In case

• BBBBB: no. 5 uppercase letters max. to identify (according to ISA standard) a

process variable and function.

• CCC: no. 3 digits max. (a number of 3 digits) to identify a sequential number. • DD:

no. 2 uppercase letter as suffix where necessary

Examples:

• 950-PT-001 Pressure Transmitter included in Unit/section 950 • 870-LAH-001 High Level Alarm included in Unit/section 870 • 820-LT-001 and 820-LT-002 Level Transmitter included in Unit/section 820 and associated to 2 pieces of equipment (for instance 2 pressure vessels numbered 820-D-001A and 820-D-001B)

The limit switches and the position transmitters installed on a valve will be prefixed by the process variable of the loop associated to the valve, e.g. FZSO-100 installed on FV-100, LZT-101 installed on LV-101. The solenoid valves installed on a valve will be tagged with the first-letter equal to the process variable of the valve, e.g. FXY-100 installed on FV-100; in fact, both instruments belong to loop F-100.

Note : The numbering will go further if there are two equipment in parallel and a triple stitching for voting. Example : For an equipment named 820-D-001A (with 820-D-001B in parallel)

The LG will be tagged 820-LG-001 and 820-LG-002 respectively.
The LT connected to the DCS will be 820-LT-002 and 820-LT-003 respectively.
The 3 transmitters connected to the ESD will be tagged: 820-LT-003A, 820-LT-003B,

820-LT-003C and 820-LT-004A, 820-LT-004B, 820-LT-004C respectively.

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 13 / 27

ISSUE 2

LAB complex Process units numbering -

Table 1 - LAB Complex Process Units identification

Identification no.

Unit description

50 100 200 300 400/500 600 700

Common to all process units Pre-fractionation Unit Hydrotreating Unit Molex Unit Pacol Unit with DeFine Unit (1) PEP Unit Detal+ Unit

Remarks: (1) For P&IDs purposes, unit 400 and unit 500 are treated as one single unit called 450

LAB complex Utilities units numbering -

Table 2 - LAB Complex Utilities identification

Identification no.

Process units

800 805 810 820 830 835 840 850 860 870 880 890

Common to all utility units Power Plant Natural Gas and Fuel Gas Plant air and Instrument Air Nitrogen Hydrogen Industrial water Demineralized water BFW, steam and condensate Cooling water Potable water Hot Oil

LAB complex Offsites units numbering –

Table 3 - LAB Complex Offsites identification

Identification no. 900 910 920 930 940 950 960

Offsites

Common to all offsites units Feedstocks storage Intermediate and recycled products storage Final products storage and expedition Chemicals storage Flare system Drainage and effluents systems

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 14 / 27

ISSUE 2

Identification no. 965 970 980

Offsites

Sour Water Stripper Waste Water Treatment Fire Water System

Other units and interconnecting - With the aim of keeping consistency with FEED, the units outside DEV1 area and the interconnecting lines will be identified with the names listed in the following table:

Table 4 - LAB Complex Other Units and interconnecting identification

Identification

Unit description

RA1K PORT DRIK LABK 000 123 456 089

Existing refinery RA1K Port facilities Interconnecting lines outside LABK Overall process and utilities units General Interconnecting lines between units 100, 200 and 300 Interconnecting lines between units 400, 500 and 600 Interconnecting lines between unit 835/890/965

Building List -

PB / SPB / NPB PB PB PB PB PB

Table 6 – PB’s

Building Name

US-001 - Main Substation US-002 - Substation US-003 & RIB-003 - Substation & RIB US-004 & RIB-001 - Substation & RIB US-005 & RIB-002 - Substation & RIB

AAA 151 151 151 151 151

CCC 001-199 200-399 400-599 600-799 800-999

For SPB’s and NPB’s instrument tag numbers please refer to respective building’s documents.

4.1.2

Instrument Identification

Instrument process variable and function will be indicated according to ISA 5.1, Instrumentation Symbols and Identification. (refer below)

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 15 / 27

ISSUE 2

4.1.3 F&G System identification

Identification Code (BBBBB)

Description

Suffix (DD)

FAP BCN BCN BCN FD GDF GDF GDO GDT GDH HD MCP

Fire Alarm Panel Beacons (Red) Beacons (Blue) Beacons (Yellow) Flame Detector Gas Detector (Flammable) Transmitter Gas Detector (Flammable) Receiver Gas Detector (Oxygen) Gas Detector (Toxic) Hydrogen Gas Detector Heat Detector Manual Call Point

R B Y

T R

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 16 / 27

ISSUE 2

Suffix (DD) F (False Floor) C (False Ceiling) A (Ambient)

F GT (Toxic) GF (Flammable)

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

Identification Code (BBBBB)

Description

SMD

SND

SNB HSCP FECP ASW SNB SNB LHD MP SW SW SW LCP

Smoke Detector

Sounder / Bell / Siren (Fire)

Sounder / Bell / Siren (Gas)

Sounder with Beacon High Sensitivity Smoke Detection Control Panel (Vesda) Fire Extinguishing Control Panel Abort hand switch Acoustic visual Alarm “LEAVE IMMEDIATELY” Acoustic visual Alarm “DO NOT ENTER” Linear Heat Detector Manual Release Station Auto/Manual selector switch with status lamp Main/Reserve selector switch Override selector switch (Inhibit switch) Inhibit/Normal status lamp

4.1.4 Telecom Systems identification

Identification Code (BBBBB) PVDOI PVDOW PVDOX PVFXI PVFXW PVFXX PVPTI PVPTW PVPTX PVWKS PVTVK PVKVM PVWUT PVIR

Description

Process CCTV System Dome Camera Indoor Process CCTV System Dome Camera Weather-Proof Process CCTV System Dome Camera Ex-Proof Process CCTV System Fixed Camera Indoor Process CCTV System Fixed Camera Weather-Proof Process CCTV System Fixed Camera Ex-Proof Process CCTV System PTZ Camera Indoor Process CCTV System PTZ Camera Weather-Proof Process CCTV System PTZ Camera Ex-Proof Process CCTV System Workstation Process CCTV System Keyboard Controller Process CCTV System Keyboard, Video and Mouse Process CCTV System Washer Unit Process CCTV System IR Illuminator

SVDOI SVDOW SVDOX SVFXI SVFXW SVFXX SVPTI

Security CCTV System Dome Camera Indoor Security CCTV System Dome Camera Weather-Proof Security CCTV System Dome Camera Ex-Proof Security CCTV System Fixed Camera Indoor Security CCTV System Fixed Camera Weather-Proof Security CCTV System Fixed Camera Ex-Proof Security CCTV System PTZ Camera Indoor

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 17 / 27

ISSUE 2

Identification Code (BBBBB) SVPTW SVPTX SVWKS SVTVK SVKVM SVWUT SVIR

Description

Security CCTV System PTZ Camera Weather-Proof Security CCTV System PTZ Camera Ex-Proof Security CCTV System Workstation Security CCTV System Keyboard Controller Security CCTV System Keyboard, Video And Mouse Security CCTV System Washer Unit Security CCTV System IR Illuminator

PGSPI PGSPW PGSPX PGBCI

PGBCW PGBCX PGWKS

HRRS HRRA HRPX URBS URBA URFXR URFXA URWKS URPX URMC

STWKS STPX STGA STCH

PAGA System Speaker Indoor PAGA System Speaker Weather-Proof PAGA System Speaker Ex-Proof PAGA System Beacon Indoor (Suffix R = Red, B = Blue, Y = Yellow) PAGA System Beacon Weather-Proof (Suffix R = Red, B = Blue, Y = Yellow) PAGA System Beacon Ex-Proof (Suffix R = Red, B = Blue, Y = Yellow) PAGA System Workstation

HF Radio system - Radio supervision HF Radio system - Radio supervision Antenna HF Radio system - Portable Radios (Ex type) UHF Trunk Radio Tetra system – Base Station UHF Trunk Radio Tetra system – Base Station Antenna UHF Trunk Radio Tetra system – Fixed Radio UHF Trunk Radio Tetra system – Fixed Radio Antenna UHF Trunk Radio Tetra system - Workstation UHF Trunk Radio Tetra system – Portable/Vehicular Radios (Ex type) UHF Trunk Radio Tetra system – Radio Multi-charger

VSAT Communication system - Workstation VSAT Communication system - Portable Radios (Ex type) VSAT Communication system – GPS Antenna VSAT Communication system – Radio Charger

IDWKS

Intruder Detection System - Workstation

SCDOS

LAN/SCS Network system – Data Outlet/Socket

AEBG AETV AEEK AEBRI AEBRW AEBRX AEMPW

Access Control System – Emergency Exit break-glass type Access Control System – Digital Camera Access Control System – Electromagnetic Lock Access Control System – Badge Reader Indoor Access Control System – Badge Reader Weather-Proof Access Control System – Badge Reader Ex-Proof Access Control System – Master Point Weather-Proof

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 18 / 27

ISSUE 2

Identification Code (BBBBB) AEWKS AETRS AEVB

Description

Access Control System – Workstation, Badging Station Access Control System – Turnstile Access Control System – Vehicle Barrier

TLTLI TLTLW TLTLX TLSDI TLSDW TLSDX TLBCI TLBCW TLBCX

Telephone System – Telephone Indoor Telephone System – Telephone Weather-Proof Telephone System – Telephone Ex-Proof Telephone System – Sounder Indoor Telephone System – Sounder Weather-Proof Telephone System – Sounder Ex-Proof Telephone System – Beacon Indoor Telephone System – Beacon Weather-Proof Telephone System – Beacon Ex-Proof

THTLI THWKS

Hotline Telephone system – Telephone Indoor Hotline Telephone system - Workstation

WMST

Weather system Meteorological Station

WIAPI WIAPX WICT WIDM

Wi-Fi system – Access Point Indoor Wi-Fi system – Access Point Ex-Proof Wi-Fi system – Controller Wi-Fi system – Device Manager

CPV CSV CPG CHR CTH CID CAE CSC CLA CTL CUR CST CWM CWI

Telecom Cabinets Process CCTV System Security CCTV System PAGA System HF Radio system Hotline Telephone system Intruder Detection System Access Control System SCS Network system LAN system Telephone System UHF Trunk Radio Tetra system VSAT Communication system Weather system Meteorological Wi-Fi system

4.2 RA1K

Numbering will follow existing rules unless otherwise specified.

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 19 / 27

ISSUE 2

LOOP NUMBERING

Instrument Loop No: AAA-YY-XXXZZ Where, AAA= Unit Identifier (three digits, in accordance with Table 1, Table 2, Table 3 & Table 4) YY= Loop Identification (refer below description) XXX = Loop Sequence Number (refer below description) ZZ = Suffix (refer below description)

YY: Loop identification The Loop identification shall be selected according to the function. (Measured or initiating variable i.e first letter of “Functional Identification” from Instrument Tag Number) Loop Sequence Number: The loop Sequence number of an instrument shall use a number assigned to the loop of which the instrument is a part. All instruments or functions within a particular loop shall share the same number. A sequential numbering system shall be used to designate loops within the same system.

ZZ: Suffix code is a 1—2-character capital letter code (If required).

Example for Instrument Loop Numbering: 100-FO-001 100-PS-001 100-T-005 100-M-003

For F&G instruments, loop number for gas detectors: example GDF will be GF, GDO will be GO, GDT will be GT, GDH will be GH to avoid duplication.

REFERENCE DRAWING FOR LAYOUT

TCM / CONTRACTOR DOCUMENT NO. 4439-SK-DA-XXXXXXXXXX 4439-SN-DH-XXXXXXXXXX 4439-XX-DE-XXXXXXXXXX 4439-NN-DG-XXXXXXXXXX Note: For respective unit layout refer the Project Deliverables List 4439-MZ-LD-000000001

FIRE AND GAS DETECTION LAYOUT HAZARDOUS AREA CLASSIFICATION LAYOUT EQUIPMENT LAYOUT CABLE TRAY LAYOUT

DOCUMENT TITLE

TAG NUMBER FOR JUNCTION BOX/FIELD PANELS (INSTRUMENT, F&G, TELECOM)

Junction box numbering shall be numbered as follow: XXXX-YYYYA-WWWW Where:

• XXXX = Unit/Section Number (three digits, in accordance with Table 1, Table 2, Table 3 &

Table 4)

• YYYY = Junction box code (Please refer below table) • A = I Ex-i (to be used only for IS circuit)” • WWWW = id number from 000 to 999 (multicore cables to package JB/LCP starting from 500)

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 20 / 27

ISSUE 2

Examples: Junction box: 100-JBA-001 for non-intrinsically safe signals and 100-JBAI-001 for intrinsically safe signals.

DCS/BPCS JBA JBD JBE JBP JBT JBR JBV LPA LPD LPE

JB for AI/AO JB for DI JB for DO JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

F&G JBAF JBDF JBEF

JB for AI/AO JB for DI JB for DO

JBPF JBSF

JB for Instrument power supply JB for Addressable Signals

Analyzer Shelter

MMS JBAM JB for AI/AO JBDM JB for DI JBEM JB for DO JBPM JB for Instrument power supply JBTM JB for Thermocouples JBRM JB for RTD JBVM JB for Vibration signals LPAM Local panel (AI/AO) LPDM Local panel (DI) LPEM Local panel (DO)

Telecom Systems JBPV JB for Process CCTV System JBSV JB for Security CCTV System JBPG JB for PAGA System JBHR JB for HF Radio system

ESD

JBAS JBDS JBES JBPS JBTS JBRS JBVS LPAS LPDS LPES

JB for AI/AO JB for DI JB for DO JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

Packages (ARCS/CRCS/DRCS)

JBAP JBDP JBEP

JBPP JBTP JBRP JBVP LPAP LPDP LPEP

JB for AI/AO JB for DI JB for DO

JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

JBFO

Fiber Optic JB (splicing box)

TGS

JBAT JBDT JBET JBPT JBTT JBRT JBVT LPAT LPDT LPET

JB for AI/AO JB for DI JB for DO JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 21 / 27

ISSUE 2

JB for Hotline Telephone system JB for Intruder Detection System JB for Access Control System

JBTH JBID JBAE JBSC JB for LAN/SCS Network system JBTL JB for Telephone System JBUR JB for UHF Trunk Radio Tetra system JBST JBWM JB for Weather system Meteorological JBWI

JB for VSAT Communication system

JB for Wi-Fi system

INSTRUMENT CABLE NUMBERING

8.1 Cable from Instrument to JB (Branch Cable)/Direct Run Cable

Cable numbers for field instruments, from JB or direct run to marshalling cabinets, take whole instrument tag numbers and add prefix C for signal cable and P for power cable. In the case of Fire & Gas detectors, interfield device cables use the tag number of the next device along the loop.

C-INSTRUMENT TAG NUMBER (For Signal Cables) P-INSTRUMENT TAG NUMBER (For Power Cables)

Example:

INSTRUMENT TAG 950-PT-001 950-FT-001

CABLE NAME

REMARK

C-950-PT-001 C-950-FT-001 and P-950-FT-001

Instrument with Signal and Power cable.

Cables between cabinets, panels, etc. will take the number of one of the cabinets with syntax CXX, IXX, PXX and NXX where, Syntax “C” is for Communication cable. Syntax “P” is for Power cable. Syntax “I” is for Intrinsically Safe cable. Syntax “N” is for Non-Intrinsically Safe cable. Syntax “F” is for Fiber Optic cable. XX - Continuous numbers

Example:

PANEL NAME

SIGNAL TYPE

CABLE NAME

950-DCS-001 950-DCS-001 950-DCS-001 950-DCS-001 151-CLA-001

COMMUNICATION POWER IS NIS FIBER OPTIC

151-CLA-001

FIBER OPTIC

950-DCS-001-CXX (XX - 00 TO 99) 950-DCS-001-PXX (XX - 00 TO 99) 950-DCS-001-IXX (XX - 00 TO 99) 950-DCS-001-NXX (XX - 00 TO 99) 151-CLA-001-FXX (XX - 00 TO 99) 151-CLA-001-FXXA (XX - 00 TO 99) 151-CLA-001-FXXB (XX - 00 TO 99) (A or B in case of cable is redundant)

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 22 / 27

ISSUE 2

8.2 Multi Cable Numbering

Multi cable numbering for signal cables between junction box and cabinet shall be numbered as follow:

M-XXXX-YYYYA-WWWW

Where:

• XXXX = Unit/Section Number (three digits, in accordance with Table 1, Table 2, Table 3 &

Table 4)

• YYYY = Multicore cable code (Please refer below table) • A = I Ex-i (to be used only for IS circuit) • WWWW = id number from 000 to 999 (multicore cables to package JB/LCP starting from 500)

Examples: Signal Cable: M-100-JBA-001 for non-intrinsically safe signals and M-100-JBAI-001 for intrinsically safe signals.

DCS/BPCS JBA JBD JBE JBP JBT JBR JBV LPA LPD LPE

F&G

JBAF JBDF JBEF

JBPF

JB for AI/AO JB for DI JB for DO JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

JB for AI/AO JB for DI JB for DO JB for supply

Instrument power

ESD

JBAS JBDS JBES JBPS JBTS JBRS JBVS LPAS LPDS LPES

JB for AI/AO JB for DI JB for DO JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

Packages (ARCS/CRCS/DRCS)

JBAP JBDP JBEP

JBPP JBTP JBRP JBVP LPAP LPDP LPEP

JB for AI/AO JB for DI JB for DO

JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

Analyzer Shelter

MMS

JBAM JBDM

JB for AI/AO JB for DI

TGS

JBAT JBDT

JB for AI/AO JB for DI

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 23 / 27

ISSUE 2

JBEM

JBPM JBTM JBRM JBVM LPAM LPDM LPEM

Instrument power

JB for DO for JB supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

JBET

JB for DO

JBPT JBTT JBRT JBVT LPAT LPDT LPET

JB for Instrument power supply JB for Thermocouples JB for RTD JB for Vibration signals Local panel (AI/AO) Local panel (DI) Local panel (DO)

TELECOM CABLE NUMBERING:

9.1 Multicore cable Number

Multicore cable to junction boxes takes a JB number less the prefix ‘J’, with A, B, C, etc. as the suffix to identify a cable in the JB and the cabinet number. For inter-loop device cables use the tag number of the next device along the loop. For the last looping JB in the loop, Suffix “A” denotes cable from previous JB and Suffix “B” denotes the return path to the cabinet.

Example:

9.2 Cable From Telecom Device to JB (Branch Cable)/ Direct Run Cable

Cable numbers for telecom device, from JB or direct run to telecom cabinets, take whole device tag number and add prefix C for signal cable and P for power cable. Add A, B, C, etc.as suffix in addition of above syntax for Multicables from same telecom device or JB. C-INSTRUMENT TAG NUMBER (For Signal Cables) P-INSTRUMENT TAG NUMBER (For Power Cables)

Example:

TELECOM DEVICE TAG

CABLE NAME

REMARK

100- PVPTI -181

C-100- PVPTI -181

100- PVPTW-101

C-100- PVPTW-101

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 24 / 27

ISSUE 2

100-CLA-123

C-CLA-123-A C-CLA-123-B C-CLA-123-C C-CLA-123-D

Cable from Outlet to cabinet

10 AIR DISTRIBUTION MANIFOLD NUMBERING PHILOSOPHY

Air Distribution Manifold shall be tag as mentioned below.

AAA-IAM-CCC Where, AAA- Unit number CCC- Sequence Number of the air manifold

Direct Tap Points shall be tagged as mentioned below.

AAA-IAT-CCC Where, AAA- Unit number CCC- Sequence Number of the direct tap.

INSTRUMENT CABINET

Instrument cabinet shall be numbered in accordance with the following system: Basic format: UUU-AAA-XXX where:

• UUU: Unit/Section Number (three digits, in accordance with Table 1, Table 2, Table 3 & Table

• AAA: No. 3 max. uppercase letters, in accordance with Table 5, identifying the type of equipment. (In case of UOP proprietary systems, letter length can be increased to 4 uppercase letters)

• XXX: Sequential number (starting from 001) Note-1,2

DCS System Cabinet DCS Marshalling Cabinet ESD Marshalling Cabinet FGS Marshalling Cabinet

Examples: 300-DCS-001 300-DCM-001 200-ESM-001 200-FGM-001 820-PLC-PK001_001 PLC Control Panel (Package PK-001) Air Compressor package Note-1: Cabinet Naming sequential number for vendors PLC can use package number along with sequential number. Note-2 At the end of sequential number below suffix to be added to identify Front / Rear Side and IS / NIS cabinet.

_F – for Front side of cabinet _R – For Rear Side of cabinet

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 25 / 27

ISSUE 2

_IS- Intrinsic Safe Cabinet _NIS – Non-Intrinsic Cabinet

Example 300-DCM-001_IS_F 200-ESM-001_NIS_R

Table 5

DCS Marshalling IS Cabinet Front side ESD Marshalling NIS Cabinet Rear side

Code and Description

ALP ANSH BD BMS BSS CCS CD CP DCB DCS DMI EJ EL ESD GBC HJ IPS LP MCC MIS MMS PC PFC PLC RIB SIS SWG XA XB XC XD XE XF

Alarm Panel Analyser Shelter Bus Duct Burner Management System Building Security System Compressor Control System Control Desk Control Panel Direct Current Distribution Board Distributed Control System Digital Multipoint Indicator Expansion Joints Elevators Emergency Shutdown System Generator Circuit Breaker Hinge Joints Instrument Power Supply Local Panel Motor Control Centers Management Information System Machinery Monitoring System Power Centers Power Factor Correction Panel Programmable Logic Controller Remote Instrumentation Buildings Safety Instrumented System Switchgears Monitor Fire Cabinet First Aid Equipment Various Evacuation Tools Portable Powder Extinguisher Ambulance

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 26 / 27

ISSUE 2

XG XH XI XJ XK XM XN XP XQ XT XW

DV SV NV YA YB YC SWRK TGS TR UPS US VFD FGS PDP NWC SER FOC OWS EWS MCM IRP SDC DCM ESM FGM EMS NER DPN BAT DCP

Code and Description

Fire Truck Inert Gas Equipment (CO2 and clean agent) Foam Bladder tank Foam Proportioner Foam Chamber / Maker Hydrant Hose Reel Portable Extinguisher Wheeled Extinguisher Breathing Apparatus Water / Foam Deluge Skid Other Security Equipment. Evacuation and firefighting (Safety Shower and Eye Wash, PPE) Deluge Valve Sprinkler Alarm Valve Gas Extinguishing Selector Valve Crane Hoist Elevator/Lift Switchracks Tank Gauging System Power Transformers Uninterruptible Power Supply Unit Substations and Switchgears Variable Frequency Drive Fire & Gas System Power Distribution Panel Network Cabinet Server Cabinet Fiber Optic Cabinet Operator Work Station Engineering Work Station Machine Conditioning Monitoring Interposing Relay Panel Shut Down Console DCS Marshalling ESD Marshalling FGS Marshalling Electrical Monitoring System Neutral Earthing Resistor Distribution Panel Battery DC Distribution Panel

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

SYMBOLS AND IDENTIFICATION FOR INSTRUMENTS ERECTION DRAWINGS/DOCUMENTS

REALISATION EN EPC D’INSTALLATIONS DE PRODUCTION DE LINEAR-ALKYL-BENZENE <> A SKIKDA ALGERIE

TCM IDENTIFICATION CODE

4439-KK-SG-000000002

SHEET 27 / 27

ISSUE 2

Code and Description

UPSDB ACS LHC AVS RVS

UPS Distribution Panel Adsorbent Chamber Control System Lock Hopper Control System Adsorber Valve Sequencing Controller Regeneration Valve Sequencing Controller

UOP supplied systems to be identified by PLC code

12 MOTOR SIGNALS NUMBERING

The numbering of Motor Signals shall be as follows:

AAA-BBBBB-XNNNAA

Where:

AAA = Unit/Section Number (three digits, in accordance with Table 1, Table 2, Table 3 &

Table 4)

BBBBB = The string (minimum 2 letters, maximum 5 letters) is defined in accordance with the functional designation of motor signals as per motor typicals shown on the P&ID Legend sheets.
X = Prefix is used to discriminate motor is associated with Pump, Mixer, Agitator, Rotary

Feeder, Compressor etc. P = Pump, M = Mixer, A = Agitator, R = Rotary Feeder, K = Compressor, F = Fan

NNN = The sequential number is coded with 3 digits and it is same as equipment number.
AA = The discrimination code is used to identify multiple items like equipment’s in parallel or

in series.

Example: Motor start command digital output from DCS to MCC on legend P&ID 1CD1673A-8820-25-0000- 0001 for pump motor 860-P-001A will be tagged as 860-XYR-P001A.

This document is property of Tecnimont S.p.A. and cannot be used by others for any purpose, without prior written consent

Project: Q-32976 - Tecnmont SKIKDA Folder: Reference Documents

Infinity

Explorer

Graph View

Backlinks